i dyed my 2wd slash LCG chassis black and it worked really well. the one i used was the blue one you get from traxxas. i used black RIT fabric dye and just left it in the boiling water till it turned. go for it.
That's awesome Jason FR!! You must feel pretty strongly about this truck to have two $500 brand new part trucks into it. Im sure it will be awesome you have great taste. And your trucks look like you run them in snow all year long they are so clean!!. Can't wait to see this build. Should do it live maybe naaa..🤟🤟🧨👊👍💪💪
I have a 3 year old Slash 4x4 vxl brushless with tsm and oba (which sounds awesome!) that came with the plastic axels. The axels lasted a week on 3s. I bought the Traxxas steel axels and they broke as well🤣. The mip axels have held up, but the grub screws at the output drives come loose too often. I picked up some long grub screws that reach all the way through the mip hub and filed off the threads to make a pin small enough to go through the output drive shafts holes, leaving some threads on the Allen key end to screw in. That worked great and has never failed
New subscriber here. I'm new to this hobby and just received my Slash 4x4 Unlimited today (it's still in the box, LOL). The Slash 4x4 Ultimate is an awesome looking truck and I went with it because I felt like you get a lot of bang for your buck compared to the non-ultimate Slash. Enjoyed your video and the tour of the Slash. Looking forward to see what you do with it going forward.
That's cool, I'm thinking about getting a Slash 4x4 Ultimate myself there's currently a sale where it's 10% Off on Amain and Traxxas. I already have a slash 4x4 platinum but i can't get over that black chassis, the blue shocks, the body and the black chrome wheels with S1 tires. And i was thinking about getting the new truck so i can let my dad drive my old one.
Merry Christmas Jason Perrin, I bought one of these Slash 4x4 Ultimate's as a roller\slider off eBay and you were right most of them don't come with the shocks i bought a set from the same seller i got the truck from Cash4RC i bought an XO-1 V1 slider as well from them. I have a bigfoot body like yours except mine has a different livery i don't know if i'll use it on my Hoss Ultimate i built up similar to your old one.
Boil pot until water is boiling then trow dye in and mix it the whole bottle, then lower heat to lowest and trow chassis in leave it 15 minutes then flip chassis and repeat 3 times it will be perfect
****Use MORE dye... Traxxas parts take dye very well. Same with other colors, if you use a lot of dye, they turn out very dark., the less you use the lighter the color will be. Trust me., I have been using rit dye for dacades. 😁😁
I'm on the fence about getting the Slash 4x4 Ultimate myself, thing looks awesome. When you put the Hoss wheels on there that looked badass! Curious though, with bigger tires on it, did you have issues to the transmission/drivetrain?? Or did you upgrade/modify anything to compensate the addition of bigger tires? Nice video!!
Got my ultimate 4x4 a week and a half ago this thing fucking rips!! Love how you can connect your phone to truck to see battery life rpms speed and etc this truck is so sick
I have the green one. I love it . I have not broken a plastic axle with the stock vxl on 3s . I did have to put the Traxxas cvd’s in my 6s castle creations mamba monster x 1515-2200kv and the mip’s xduty in the castle creations mamba monster 2 1515-2200 kv non sensored.
Great to here. I am going to run these axles until I break them. But even then I’ll only replace them with metal ones if I feel the plastic ones broke to easy.
Regards, as soon as the video starts there is a nice display of Rc models. So I asked myself, how and where do you store all Lipo batteries? Obviously always stored after the storage function of the charger. Advice or other is well accepted. Thank you. p.s. (I keep them in metal cans, in the corridor away from everything)
Did they do a 2021 revision on the ultimate? Traxxas always secretly updates their cars... I remember watching e revo 2.0 videos about the TERRIBLE rod ends then traxxas fixed them and put better ones on new e revo 2.0s and almost nobody realized it for MONTHS 🤣
I don't think they have since 2018. That's around when they switched shocks. The was the biggest thing. They've done the extreme HD drives and a few minor things in the last couple of years.
You can buy black chassis plate from ebay. I think I gave like $12 or so for one. Well... for 2wd slash anyways. Think the raptor edition came in black
This coment is for heavy metal RC!!! Ooooooaaaaaahhhhhhhhhhwwwwwooooooooo!!!!!!!!!! Hell yeah bro!!! Jason if you wouldn't mind giving that to him . I barely know how to run one of these things. These telephone computers wwwwwoooooooooaaaaaaaahhhhhhhhh. Rrrrrrrrrraaaaaaa.🧨🤟☠🍻💨🦸♂️💋🍆. Wooops on the last 3 force of habbit hahaaaaaaaa 👊👊
i dyed my 2wd slash LCG chassis black and it worked really well. the one i used was the blue one you get from traxxas. i used black RIT fabric dye and just left it in the boiling water till it turned. go for it.
That's awesome Jason FR!! You must feel pretty strongly about this truck to have two $500 brand new part trucks into it. Im sure it will be awesome you have great taste. And your trucks look like you run them in snow all year long they are so clean!!. Can't wait to see this build. Should do it live maybe naaa..🤟🤟🧨👊👍💪💪
That funky blue is due to the original plastic not being completely white. It already has a off-white grey tint to it so it'll be a little off
That makes sense. Thank you.
I have a 3 year old Slash 4x4 vxl brushless with tsm and oba (which sounds awesome!) that came with the plastic axels. The axels lasted a week on 3s. I bought the Traxxas steel axels and they broke as well🤣. The mip axels have held up, but the grub screws at the output drives come loose too often. I picked up some long grub screws that reach all the way through the mip hub and filed off the threads to make a pin small enough to go through the output drive shafts holes, leaving some threads on the Allen key end to screw in. That worked great and has never failed
New subscriber here. I'm new to this hobby and just received my Slash 4x4 Unlimited today (it's still in the box, LOL). The Slash 4x4 Ultimate is an awesome looking truck and I went with it because I felt like you get a lot of bang for your buck compared to the non-ultimate Slash. Enjoyed your video and the tour of the Slash. Looking forward to see what you do with it going forward.
Would've been nice if traxxas went clipless with the slash.
At the time it came out i don’t think they invented the clip less yet
Same. I hope when clip less comes out, you could retro fit older slash
That looks great. I am researching my next truck. I am looking at the slash. The 4 wheel drive looks awesome.
Wow nice unboxing footage my friend👍🏻👏🏻
That's cool, I'm thinking about getting a Slash 4x4 Ultimate myself there's currently a sale where it's 10% Off on Amain and Traxxas. I already have a slash 4x4 platinum but i can't get over that black chassis, the blue shocks, the body and the black chrome wheels with S1 tires. And i was thinking about getting the new truck so i can let my dad drive my old one.
Merry Christmas Jason Perrin, I bought one of these Slash 4x4 Ultimate's as a roller\slider off eBay and you were right most of them don't come with the shocks i bought a set from the same seller i got the truck from Cash4RC i bought an XO-1 V1 slider as well from them. I have a bigfoot body like yours except mine has a different livery i don't know if i'll use it on my Hoss Ultimate i built up similar to your old one.
Boil pot until water is boiling then trow dye in and mix it the whole bottle, then lower heat to lowest and trow chassis in leave it 15 minutes then flip chassis and repeat 3 times it will be perfect
****Use MORE dye...
Traxxas parts take dye very well.
Same with other colors, if you use a lot of dye, they turn out very dark., the less you use the lighter the color will be.
Trust me., I have been using rit dye for dacades.
😁😁
I'm on the fence about getting the Slash 4x4 Ultimate myself, thing looks awesome. When you put the Hoss wheels on there that looked badass! Curious though, with bigger tires on it, did you have issues to the transmission/drivetrain?? Or did you upgrade/modify anything to compensate the addition of bigger tires? Nice video!!
Got my ultimate 4x4 a week and a half ago this thing fucking rips!! Love how you can connect your phone to truck to see battery life rpms speed and etc this truck is so sick
I just got a slash 4x4 ultimate and I’m having a hard time picking up my Xmaxx 😅
I"ve never seen such a great video in my life I wish you prosperity.!!!
형제 친하게 지내봅시다.
😊😊😊😊😊
Nice video 🔥
I have the green one. I love it . I have not broken a plastic axle with the stock vxl on 3s . I did have to put the Traxxas cvd’s in my 6s castle creations mamba monster x 1515-2200kv and the mip’s xduty in the castle creations mamba monster 2 1515-2200 kv non sensored.
Great to here. I am going to run these axles until I break them. But even then I’ll only replace them with metal ones if I feel the plastic ones broke to easy.
@@JasonPerrinRCVlogs they actually have a heavy duty plastic axle installed on them . Crashes might break one. But not from the power.
@@chriswade3986 yes they have the HD ones in the Hoss, rustler 4x4 and the slash. I am hoping they hold up better then the other plastic ones.
I would like to see the rustler 4x4 vxl with all the telemetry parts. Love this car much more than the slash.
Dam now I want a ultimate slash heard they are going to be discontinued
Where did you hear this? I could only imagine them discontinuing them if they replace it with a next Gen car...
Bought the same truck…my body doesn’t line up correct. Fits funky. Going to find a different body…like to find a Toyota tundra …Thanks great review.
why's the front shock tower so shiny?
Regards, as soon as the video starts there is a nice display of Rc models.
So I asked myself, how and where do you store all Lipo batteries?
Obviously always stored after the storage function of the charger.
Advice or other is well accepted.
Thank you.
p.s. (I keep them in metal cans, in the corridor away from everything)
I like the body
Did they do a 2021 revision on the ultimate? Traxxas always secretly updates their cars... I remember watching e revo 2.0 videos about the TERRIBLE rod ends then traxxas fixed them and put better ones on new e revo 2.0s and almost nobody realized it for MONTHS 🤣
I don't think they have since 2018. That's around when they switched shocks. The was the biggest thing. They've done the extreme HD drives and a few minor things in the last couple of years.
Need to take the motor out the hoss and put it in the Traxxas slash 4x4
I have been thinking about it. I measured and I would need to move the esc over. So I’ll need to fab some sort of mount.
Nice 😀
They sell just the black lcg chassis now. $20 usd
They spec the Hoss and Rustler 4x4 as identical wheelbases.
You can buy black chassis plate from ebay. I think I gave like $12 or so for one. Well... for 2wd slash anyways. Think the raptor edition came in black
Interesting! A donor truck for the Hoss. Are you goin to keep the rest of it as spare parts 🤔
No. I’m going to swap the parts between the two truck. So I’ll have an Ultimate Hoss and a stockish slash 4x4.
@@JasonPerrinRCVlogs awesome 👍 Lots of Traxxas content on the way, lol
I feel the same I’m with you on that one... they need to change body
That is SUCH a contrast. that grey plastic is awful. Wow... I want an ultimate now.
The grey plastic is awful. That’s for sure.
Well is the gear metal or plastic
does it come with a battery and charger
?
No.
Hey can you send me a link for the wheel nuts you need to use the kraton 8s tires on the xmaxx. Or direct me. Thanks.
whats the part number on that new slash? Thankyou for your time
Where did you pick this up from? A fellow canadian here
Eliminator RC
Use code "PERRIN" to get $15.00 off at webstore.eliminator-rc.com/ when you spend $100 or more. (some restrictions do apply)
I'm gonna guess that you're Canadian cause my Ultimate Slash was $499.99
Use primer 3 coats of primer before you paint it
compared to a base slash 4x4, how much do you think in aluminum parts and upgrades is in the ultimate ?
If you’re asking does the truck absolutely needed them I would say no. But the shock are a very nice upgrade.
Mark Santa Maria had it on his channel about 800 bucks worth in parts alone its definitely worth it
Can confirm, it’s a pretty penny to upgrade an older slash 4x4.
Its supposed to have steel axles shouldn't it
No it’s not
if you dont like the body buy one .....
No entiendo nada, pero me gusta el carro. 😅
This coment is for heavy metal RC!!! Ooooooaaaaaahhhhhhhhhhwwwwwooooooooo!!!!!!!!!! Hell yeah bro!!! Jason if you wouldn't mind giving that to him . I barely know how to run one of these things. These telephone computers wwwwwoooooooooaaaaaaaahhhhhhhhh. Rrrrrrrrrraaaaaaa.🧨🤟☠🍻💨🦸♂️💋🍆. Wooops on the last 3 force of habbit hahaaaaaaaa 👊👊