FULL ATV ENGINE RESTORATION! I Made 2 HUGE MISTAKES!!! 😱 Yamaha Moto 4
ฝัง
- เผยแพร่เมื่อ 14 ม.ค. 2025
- I finally got this Moto 4 200 Engine restored! I made 2 huge mistakes on this build! I dropped an o ring in the motor AND I messed up the paint somehow.
If you like what we're doing here at Toy Shop and would like to support us then be sure to check us out on Patreon! www.patreon.co...
Cleaning products from Pryme: www.prymemx.com
Motion Pro Case Splitter V2: www.motionpro....
Using these links will help me out!
Toolbox Widgets
1/4" drive Socket Widget - a.co/d/29Ux2rs
3/8" drive Socket Widget - a.co/d/5cCi3mT
1/2" drive Socket Widget - a.co/d/8EsPl9s
Screwdriver Widget - a.co/d/5F7EB5Y
Wrench Widget - a.co/d/0qyVzIM
Wide Motorcycle Scissor Jack - a.co/d/fQLQypt
Narrow Motorcycle Scissor Jack - a.co/d/cGDv73u
Umbilical tank setup;
Moton Pro Aux Tank - a.co/d/2hMd2xe
IV Stand - a.co/d/hHiSSGU
Metric #2 Phillips - a.co/d/1qhV0me
Slide Hammer - a.co/d/e8bu3yW
Camera I use to film - a.co/d/9d39Jjm
Mic I use - a.co/d/0V4vNZ7
Visit us at www.toyshop966... to see what we're up to and to check out everything Amsoil has to offer!
editing is getting a lot better!
Those damn o rings get ya every time😂
It was terrible 😂
When will the next video be out on the moto 4??
Unfortunately not soon enough lol I’m working on a sled right now which hopefully that video will be out soon. And I bought another project for after the moto4 so I’ve been playing with that for a lil bit.
@@ToyShopRestorations awesome, I’ll be looking forward to your next vids
Another video!! I love your vids man, keep up the great work!!
I like the videos.
But my gosh.
One time , in band camp ..😂
Oh ya? 😂 thanks!
Where do you get your diagrams from to put them back together? I have to do the same engine now. Also, this engine was working fine and while running in second gear it just popped into "neutral" and kept running but wouldn't move, and won't downshift into actual neutral to allow the engine to start. Any idea what might have happened? I took the oil fill side off already and nothing is damaged there, shift mechanism is together and only shifting between 2-3 I think but won't go up or down from there so I think I have to pull it all apart and split the case. Uggg
Www.partzilla.com good luck 😅 if you get stuck you can email me and I’ll try to help you thru a sticky spot. Toyshop9665@gmail.com
Was it just the high temp paint that flaked or did the normal paint flake off too?? Id like to know as im interested in buying some
I used the normal stuff on the racks and I don’t remember honestly if it flaked when I put it on or not 😅 everything on the engine was high temp. I also want to investigate and see if it was the primer that screwed me or not. It almost looks like bar aluminum where it flaked and if that’s the case then maybe the paint is good but maybe the primer didn’t adhere to the aluminum? 🤷🏻♂️
what year Moto 4 is this ? I have an 89 yfm 250 Moto 4 Im trying to restore and the previous owner stripped almost ever bolt, screw and fastener on the engine I see you have nice new ones where can I find those ?
This is an 85 and I took out the bolts and measured how long the threads were on each one of them and then got on McMaster Carr website and ordered bolt from them
i wish more people would use this much rtv lol
I’ve seen some bad ones 😂😂😂
hey man just curious where do you source all your parts I'm currently restoring one the first bike i ever worked on and i cant get anything local that's in good shape and everything that the stores can ship in is gonna cost me a arm and a leg. also do you have a tool list for tools everyone should have?
What type of parts do you need? I use partzilla for OEM parts (or a dealer) the bearings in the motor I just brought to Napa and had them get me new ones. Or I use eBay 🤷🏻♂️ those are my main sources for parts. And I have a rough tool list in my description (I’m gonna look now to make sure it’s there) of specialty tools I’ve gotten and I really like but as far as hand tools I think harbor freight is a really good option. Tekton has good stuff too! A lot of my stuff is Snapon or Mac from when I worked in a shop but now all my tools come from harbor freight, eBay, or Amazon.
@@ToyShopRestorations more or less looking for everything but Im in Canada will part Zilla ship to everywhere in Canada?
@@ToyShopRestorations the stuff I'm mainly looking for is small specific stuff like the pieces that connects the front drums to the brake cables or like the peice for the choke that goes into the carb but even like the carb rebuild kit I couldn't get and they were gonna charge me 70$ to get it shipped in
@@joshuaadams2066 oh wow 😅 I’m not sure how they handle Canada. I’ve had to call them a few times and they’ve always been great to me. Find their number on their website and call and ask them.
Would you rebuild my Yamaha moto4 yfm 200 engine ?? If i sent it to you. You do great work.
lol I appreciate the compliment but it would be ridiculously expensive to have me do it 😂 it’s a lot of work
@@ToyShopRestorations so what's the cost? If u did it.
@@s10blackwidow you can email me if you’re serious. I’d have to crunch numbers. Toyshop9665@gmail.com
i got a moto 4 i cant get to shift into gear
Which shifter?
like into first gear idk what yr it is exacly its got the shaft seat with both racks 3 bolt back rims @@ToyShopRestorations
How the fuck are we supposed to duplicate that.. that video is fucking useless
Which part?
@@ToyShopRestorations I needed to see the shift shaft going in. I have one I just restored and I was riding it to brake it in a little bit.. and there is rod that is right behind the flywheel case.. well that rod came out and now it i only gears down to first gear and it won't go to neutral
@@jasoncoleman476 I still have to put together a “how to rebuild a moto 4 motor” video. Let me look thru my video tonight. Maybe email me and I can send the clip tonight to get you by? Toyshop9665@gmail.com
@@ToyShopRestorations I appreciate it. I was a little bent from dealing with little issues with this buggy after working on it for 6 months here and there. I apologize. I got everything worked out for the most part. The problem I'm having is when I put the cover on over the flywheel. The clutch won't engage. If I take the cover off the clutches will engage. I know that you adjust the clutch there but I have adjusted it the way it's supposed to be and it still doesn't want to work.. I don't know if you have any advice about how to adjust the clutch.
@@jasoncoleman476 only thing I can think of is maybe you have a washer in the wrong spot? Maybe look on www.partzilla.com and find the exploded view of it and make sure everything is in the correct arrangement? Make sure that you didn’t accidentally put a washer inside the case that’s supposed to be on the outside? But you did break the nut loose and hold it and then thread the center stud in until the shifter has only a little play correct? Or if it’s too tight maybe you’ll have to back out the stud until you get free play again. I did film that part I just didn’t put it in this video.