CNC Router project. Organize your workshop with this easy solution.

This is another workshop organisation project made on my CNC router.
📋Link to CNC files:
www.patreon.com/posts/paper-t...
🔔 Subscribe for more CNC and woodworking videos just like this🔔
/ @falcon390cncworks
✅CNC I recommend✅
1️⃣ OpenBuilds CNC router: openbuildspartstore.com/lead-...
✅CNC router bits✅ (Amazon affiliate link)
🔗Bit Starter Kit: geni.us/LiJ5vH
🔗End mill 1/8" or 3.175mm: geni.us/rUnyPA
🔗V-bits 1/8" or 3.175mm 60degrees: geni.us/NQRF
🤝HELP SUPPORT THE CHANNEL 🤝
1️⃣ Patreon: patreon.com/Falcon390CNCWorks...
2️⃣ Etsy: www.etsy.com/uk/shop/Falcon39...
3️⃣OpenBuilds affiliate link: openbuildspartstore.com/?gcli...
✅ For inquiries contact me at:
📧 [e-mail]
-------------------------------------------------------------------------------------------------------------------------------------------------------
📌 Timestamps
00:00 - Cutting down 4x8" (12mm plywood)
00:42 - Setting out CNC router.
01:10 - Test cutting joinery to establish tolerance on the joints.
02:21 - Cutting parts for assembly
03:25 - Removing parts from CNC
03:48 - Dry assembly
04:52 - Glue up
06:23 - Quick test
06:55 - The End 🏁🏁🏁
📺 About This Video
This is a beginners level CNC project to help you organize your workshop. In the video you can see me cutting test pieces to check my CNC joints tolerances. After knowing my tolerances I procced CNC cutting actual parts. After assembly you I had to changed the design slight. Plans for my patreons will be showing updated design.
If you want to make your own paper towel organizer join my Patreon page to get plans, support and knolage from myself and our growing community
Thank you guys for your support and comments.
See you soon,
Falcon390 CNC Works
📋CNC job details from VCarve Pro software:
www.patreon.com/posts/dog-bon...
------------------------------------------------------------------------------------------------------------------------------------------------------
📌 Hashtags
#cnc
#Woodworking
#CNCrouter

[@FALCON390CNCWorks]

📋Link to CNC files:
www.patreon.com/posts/paper-towel-98050269?Link&
✅CNC I recommend✅
1⃣ OpenBuilds CNC router: openbuildspartstore.com/lead-cnc-machine-1515-fully-loaded/?ref=HwWISj9MJZ14VI
✅CNC router bits✅ (Amazon affiliate link)
🔗Bit Starter Kit: geni.us/LiJ5vH
🔗End mill 1/8" or 3.175mm: geni.us/rUnyPA
🔗V-bits 1/8" or 3.175mm 60degrees: geni.us/NQRF

[@ment001]

Niceconcept. You could make the bottom of the sides 10mm longer the ad a strip along the front. Then feed the paper towel through the gap to give it something to tear along.

[@FALCON390CNCWorks]

Thanks, that's a great idea! I will need to make it again and add this strip. 👍