I just purchased this. Quick delivery. Great fitment. Easy installation. I am very pleased with this purchase. Anybody with a 4Runner should purchase this. Good luck with your business. Thank You Charlie
@@charliepike8482 I hv it too. Great mod. Wish the color matched a little better but I do like it a lot. I still need to adjust mine. Not a tight close.
Great mod - I ordered one and also posted this TH-cam link and the Esty link on the 4Runner forum. Good feedback and purchasing activity from the members. Thank you VG!
I appreciate you, it’s thanks to viewers like you Joey that the channel keeps moving forward. Thank you! You will enjoy it, I’ve had mine installed for a couple of weeks now. I love it. What a difference it makes.
After putting 250K on my beloved '06 my husband found a '15 Trail with low miles - How could I resist!! But wow - the interior was a bit of a surprise and not as well finished as my '06. Thank you so much for this... I am ordering mine now!
Just got mine yesterday and installed thia morning, so far so good. Tried to use a drill which was an option as per the included instructions, the bit just kept slipping so I did it exactly how it was installed in the video with tape as a marker and a right angle bit driver use 1/4 inch nut driver and worked out well. Thanks for sharing this video, was exactly what I was looking for now if only matt can make a low profile set of drawers which don’t cost over $1000 like the other companies I’ve seen so far.
Vikings Garage is a great source for valuable information. Thank your wife for me for pushing you into the TH-cam market. I ordered and installed this product. Yes, a bit spicey on pricing but this is American ingenuity, American made and those are two great reasons to spend the $$$. The fitment was as described in your video. Looks great. Appreciate the security.
Very cool - I'll definitely have to pick up one of these. Sold my 2006 Sport in Magnetic Grey with 220K miles for a new 2022 TRD ORP in Lunar Rock this year. - Love it.
Definitely on the expensive side, however that being said its one of those mods to a 5th Gen 4R that should have been stock and this guy went through a lot of prototyping to make this product available to the community. So, if you can spare the coin for this mod its a must have indeed! I'm impressed! 👍
For the little cover I used 5lb double sided tape and a plastic hook you can buy in packs of 6 to make a handle. Works awesome and now I can access the bottom of the panel without having to remove the upper section.
I made one of those about a year ago. It took some time but i really like it. Cost me about $30 for a small sheet of ABS plastic and a tube of ABS glue to glue on the "hooks" on the bottom. It did take some time to get the shape right.
This is awesome! Thanks for showing this, I've always wanted to cover that section, but not quite handy enough to fabricate myself. I just ordered myself one 👍🏼
Thats a NICE easy mod. It's completes the back, makes it look neater. I have already installed the canvasback brand side covers to protect the plastic wheelwells and sides when carrying wood or gear. First time I put wood in back I discovered it scratched easy and ordered them. If you dont run the canvasback's this mod cover of yours is the way to go for sure to keep all the misc junk in the cubby hidden. Love it.
In the process of doing this mod. Thank you for sharing it. It’s going to be awesome to have a little more storage in the rear. I posted a thank you to you on fb. But it couldn’t find you.
The color is a little off not quite as dark. I was wondering if I tried spraying with blk spray if it might look better. Ours I think needs adjusting, it doesn’t come off that easily.
To answer your question, "Are you done modding your 4Runner?" Let me check my wallet... Not this month. Although, I just ordered those covers... :)) Those are great mods! I really like what he did, especially relocating the dongle socket. Those covers are awesome. I don't tow as much as I do make those dangerous Costco runs. Because I have Bilstein 6112s in the front (at the lowest setting) my rear ended up being a bit too low, so I added 25 mm spacers in the back. That way, I avoid pissing off on-coming traffic at night when loaded up. Unloaded, the vehicle has a nice, subtle rake. I did think of adding air bags, but it didn't make sense for my application. Thanks for showing us this, Paul! Say, are you going to install a lift kit on that "little yellow car?"
Lol, thank you for the good laugh. I appreciate you! I hope you enjoy your covers. I’m still trying to get the little one to ride it without freaking out. Although raising it would be interesting, I would finally get all the views 🤣🤣🤣 Enjoy the rest of your weekend!
I like the cover, quality is good, and I finally got it installed. Since no written directions were included and no invoice. I had to research TH-cam to find the installation instructions. The invoice should include how to locate this TH-cam instruction. Besides all that, good product.
I ended up using a flexible extension bit to get my drill up into the tight area to drill the screws in and that made it take about 30 seconds. VS the way the inventor is doing in the video.
I saw the speaker and said “Storage compartment? What storage compartment? That’s what Molle panels and plastic bins are for. I want subwoofers, now.” 😂. Nice covers, though. It’s a problem solver.
Use note: love my covers, but after a while one of the tabs separated from the large one. I recommend drilling a small hole 8/32" is the size I did, and install a screw and nut as secondary attachment for the tabs.
Im late to the 4 runner game. bought a 23 off road and cant find a good spot for my noco battery jumper and a few other small tools. This should be perfect. cant wait!
I must say that after the first viewing of the Cargo Storage Cover I couldn't stop thinking about how cool/necessary this mod would be at some point. Should have been a factory option. A day later, viewed the video again and I've now ordered one. Hope it's here soon enough to install before I take my next cross country trip in October.
@@VikingsGarage Received and installed with the following caveat ... The strike plate is very difficult to locate. The accompanying template gives the centerline, but not the front to back offset. I am not using the release at the moment because the friction fit of the large panel seem to be adequate. Looks great, though!
Played with the strike a little bit and determined that the vertical down leg needs to be toward the interior of the storage area. Still a bit difficult to screw in, but doable (probably because I'm 74 and not as flexible as I once was). Now everything is how it needs to be. Should definitely be an OEM item from Toyota.
I took my side pocket out and have a custom 10 inch sub woofer box inside, and both my shift knobs for transmission and transfer case r custom wood handles made by a guy on Etsy
It was awesome meeting you guys today. Thank you for the patch. ? Where should I go for service on the 18 4Runner? I took my 08 FJ to Towne for years but ended on a bad note. I’ve had a Lexus for the past few years, waiting for the perfect 4Runner. So I haven’t had to pay for any service in awhile. Thanks again. -Meghan
It was very nice to meet you , Meghan. I appreciate your support! I’m located at Crystal Auto Mall Toyota, just ask for Paul Tech 146. I’ll take very good care of your Beautiful 4Runner. 😁 Enjoy the rest of your day!
This is such a great mod - can't wait to purchase one! Just a quick note - love the channel, but sometimes the filming is so wobbly and moves so fast - I literally get motion sickness. I would watch all your videos but often can't make it through them because my stomach can't handle it 😂🤢.
Screw it, just ordered. I've got a Snow Cap White '23 ORP. Love it. I added side steps to mine as well. Wife and kids like the truck but were having issues get in and out.
Got a link to the shifter boot clip you got off etsy? Also what year Honda was the boot from out of curiosity? My shifter is really worn and I was already looking to change. That set up looks really nice!
Ok… there’s probably a cheaper way to do this but I completed this mod after I saw it. I bought the taco shift knob from the stealership because I assumed the many cheaper options on eBay are fake. I then bought a used shift boot assembly for a tacoma part number 35978-04010. This is the only way I found to get the clip that clips into the shift knob. Then I got a boot off of Amazon and cut the hole open a bit more to fit around the clip and used a zip tie to attach it to the clip. It looks amazing and functions great. Good luck
I have a 4th Gen and just got a 5th Gen. They left out sooo many features on the 5th Gen that were perfect in 4th gens!!!! -auto lock hatch -center console table -oil filter location -rear window button on fob Sigh….
Aaaand.. sold out. :( Very cool mod! I have added it to my favorites list on Etsy. I can understand why it would be sold out but hopefully it's back in stock soon! I would also LOVE to know what all is required to add that Tacoma TRD Pro gear shift knob to my 2021 4R Venture!! Like, will it be a direct remove and replace swap or is that boot required?
Most epic thumbnail of all time.
Thank you!! 😅
I just purchased this.
Quick delivery.
Great fitment.
Easy installation.
I am very pleased with this purchase.
Anybody with a 4Runner should purchase this.
Good luck with your business.
Thank You
Charlie
Enjoy it, 👍🏻
@@charliepike8482 I hv it too. Great mod. Wish the color matched a little better but I do like it a lot. I still need to adjust mine. Not a tight close.
Great mod - I ordered one and also posted this TH-cam link and the Esty link on the 4Runner forum. Good feedback and purchasing activity from the members. Thank you VG!
I appreciate you, it’s thanks to viewers like you Joey that the channel keeps moving forward.
Thank you!
You will enjoy it, I’ve had mine installed for a couple of weeks now. I love it. What a difference it makes.
After putting 250K on my beloved '06 my husband found a '15 Trail with low miles - How could I resist!! But wow - the interior was a bit of a surprise and not as well finished as my '06. Thank you so much for this... I am ordering mine now!
You’re welcome!! Thank you for sharing your story.
Thats what I notice about the 5th gen. The lacking of compartments. Like the one pruor gens. This is a good addition
Just got mine yesterday and installed thia morning, so far so good. Tried to use a drill which was an option as per the included instructions, the bit just kept slipping so I did it exactly how it was installed in the video with tape as a marker and a right angle bit driver use 1/4 inch nut driver and worked out well.
Thanks for sharing this video, was exactly what I was looking for now if only matt can make a low profile set of drawers which don’t cost over $1000 like the other companies I’ve seen so far.
😅 You got it!!
Vikings Garage is a great source for valuable information. Thank your wife for me for pushing you into the TH-cam market. I ordered and installed this product. Yes, a bit spicey on pricing but this is American ingenuity, American made and those are two great reasons to spend the $$$. The fitment was as described in your video. Looks great. Appreciate the security.
You’re very welcome!!
I’ll give her the message 😅
I appreciate your support!!
Very cool - I'll definitely have to pick up one of these. Sold my 2006 Sport in Magnetic Grey with 220K miles for a new 2022 TRD ORP in Lunar Rock this year. - Love it.
👏🏻👏🏻 Once you go 4runner 😉
Definitely on the expensive side, however that being said its one of those mods to a 5th Gen 4R that should have been stock and this guy went through a lot of prototyping to make this product available to the community. So, if you can spare the coin for this mod its a must have indeed! I'm impressed! 👍
That was my thought when I first saw it. 💯
For the little cover I used 5lb double sided tape and a plastic hook you can buy in packs of 6 to make a handle. Works awesome and now I can access the bottom of the panel without having to remove the upper section.
Instead of a latch, they could have also used magnets, one on each side of the panel.
That’s actually not a bad idea 👍🏻
I made one of those about a year ago. It took some time but i really like it. Cost me about $30 for a small sheet of ABS plastic and a tube of ABS glue to glue on the "hooks" on the bottom. It did take some time to get the shape right.
Crazy I’ve owned this truck for 6 years never once even though of this . Really cool, thank you for sharing
I bought this cover set from Matt’s sight and they are perfect. The look and fit is awesome! Thanks Viking Garage for this video! 🍻👍🏻
Glad you like them! Your welcome!!
Is there a website?
This is awesome! Thanks for showing this, I've always wanted to cover that section, but not quite handy enough to fabricate myself. I just ordered myself one 👍🏼
You’re very welcome.
When I first saw it I knew I had to share it with you guys. Enjoy!!
etsy.me/3Bo1Pjy
I just had this video show up in my stream and I didn't even wait till the end of it before I ordered one!
👏🏻👏🏻 That’s awesome!! You’re going to love it.
The Shift boot is banging! I will be doing that.
Cool product, but $75 is a ridiculous price point
worse is the $16 for shipping
Any leads on a reasonably priced product of any kind?
@@artvandelay5749 I can sell you some latex or import it can't do exports
Thats a NICE easy mod. It's completes the back, makes it look neater. I have already installed the canvasback brand side covers to protect the plastic wheelwells and sides when carrying wood or gear. First time I put wood in back I discovered it scratched easy and ordered them. If you dont run the canvasback's this mod cover of yours is the way to go for sure to keep all the misc junk in the cubby hidden. Love it.
I’m glad you like it. Thank you for sharing.
@@VikingsGarage you have great taste with picking your mods.. your rig is looking great .
Thank you 🙏🏻
@@VikingsGarage Would you guys be making one for the limited model with the JBL speakers?
Funny guy!!
In the process of doing this mod. Thank you for sharing it. It’s going to be awesome to have a little more storage in the rear. I posted a thank you to you on fb. But it couldn’t find you.
You’re very welcome!! 🙏🏻
I’m glad you like it.
(You can always find me there under Paulo Barreiro)
The color is a little off not quite as dark. I was wondering if I tried spraying with blk spray if it might look better. Ours I think needs adjusting, it doesn’t come off that easily.
JUST WHEN I THOUGHT I WAS OUT....THEY PULL ME BACK INNNNNNN (with another MOD) ... looks awesome I will be ordering!
😅👏🏻👏🏻
I bought this when you dropped the video. This product is awesome!
👍🏻👏🏻👏🏻
To answer your question, "Are you done modding your 4Runner?" Let me check my wallet... Not this month. Although, I just ordered those covers... :))
Those are great mods! I really like what he did, especially relocating the dongle socket. Those covers are awesome.
I don't tow as much as I do make those dangerous Costco runs. Because I have Bilstein 6112s in the front (at the lowest setting) my rear ended up being a bit too low, so I added 25 mm spacers in the back. That way, I avoid pissing off on-coming traffic at night when loaded up. Unloaded, the vehicle has a nice, subtle rake. I did think of adding air bags, but it didn't make sense for my application.
Thanks for showing us this, Paul! Say, are you going to install a lift kit on that "little yellow car?"
Lol, thank you for the good laugh. I appreciate you!
I hope you enjoy your covers.
I’m still trying to get the little one to ride it without freaking out.
Although raising it would be interesting, I would finally get all the views 🤣🤣🤣
Enjoy the rest of your weekend!
I like the cover, quality is good, and I finally got it installed. Since no written directions were included and no invoice. I had to research TH-cam to find the installation instructions. The invoice should include how to locate this TH-cam instruction. Besides all that, good product.
Im glad you found the video, link is in the buying site. 🤷🏼♂️
Toyo 12 Just installed mine -2022 ORP - looks great. Hides owners manual, spare lug nut key and cargo net. Thanks guys! Keep up the good work.
Nice work! That’s awesome. Thank you.
Both you guys are awesome, thanks for the knowledge!
Just ordered mine and excited to get it!!
👏🏻👏🏻 Awesome!!
Yup, should've come from the factory like this. Super cool!
👍🏻
Just ordered mine, looking forward to installing it and cleaning up the rear of my 4 runner! Thanks for the info
You got it!! Enjoy!
I ended up using a flexible extension bit to get my drill up into the tight area to drill the screws in and that made it take about 30 seconds. VS the way the inventor is doing in the video.
I got you. Noted!
Went & ordered it before I finished watching the video, thanks for the amazing find.
That’s awesome, thank you for watching!!
I saw the speaker and said “Storage compartment? What storage compartment? That’s what Molle panels and plastic bins are for. I want subwoofers, now.” 😂. Nice covers, though. It’s a problem solver.
😁😅
Just ordered this. Looking forward to getting it installed.
👏🏻👏🏻 you’re going to love it!!
Use note: love my covers, but after a while one of the tabs separated from the large one. I recommend drilling a small hole 8/32" is the size I did, and install a screw and nut as secondary attachment for the tabs.
👍🏻
You should sell the trailer adapter
🤔
@@VikingsGarage lol never mind
Thanks for sharing. Just put my order in. Hard to pass on functional mods like this
Agreed!! 👍🏻
I ordered mine need to install today thank you so much!
👍🏻👏🏻
Done modding my 4Runner🤣🤣🤣
So adorable
George Lucas once said his film where never finished only abandoned. Like a 4Runner owner
Isn’t that the truth!!
Really like that shifter boot mod.
I want to add a spray tank full of skunk spray to get the tailgaters off. Nice little area to hide the tank.
🤣🤣👏🏻👏🏻
Throw a nice trd logo on it and you can take my money
I just ordered this. Looking forward to installing it and putting it to use. you know.... hold that sh*t in there
lol
lol, I feel you!! 😆
Im late to the 4 runner game. bought a 23 off road and cant find a good spot for my noco battery jumper and a few other small tools. This should be perfect. cant wait!
You’ll love it!!
Nice! Just ordered it. Can't wait!
👍🏻
I must say that after the first viewing of the Cargo Storage Cover I couldn't stop thinking about how cool/necessary this mod would be at some point. Should have been a factory option. A day later, viewed the video again and I've now ordered one. Hope it's here soon enough to install before I take my next cross country trip in October.
Right on, I do agree! it was so well executed I had to share with all of you. Safe travels, thank you for your support!!
@@VikingsGarage Received and installed with the following caveat ... The strike plate is very difficult to locate. The accompanying template gives the centerline, but not the front to back offset. I am not using the release at the moment because the friction fit of the large panel seem to be adequate. Looks great, though!
Awesome!! 👏🏻
Played with the strike a little bit and determined that the vertical down leg needs to be toward the interior of the storage area. Still a bit difficult to screw in, but doable (probably because I'm 74 and not as flexible as I once was). Now everything is how it needs to be. Should definitely be an OEM item from Toyota.
👍🏻
Received, installed and loved
👏🏻👏🏻🙏🏻
Nice order placed, currently have jumper cables in a trash bag there
👏🏻👏🏻
This is fantastic! My order is in!
Awesome!!
I took my side pocket out and have a custom 10 inch sub woofer box inside, and both my shift knobs for transmission and transfer case r custom wood handles made by a guy on Etsy
Sweet! Thanks for sharing!
Just got mine. AWESOME!!!
Sweet!!! Enjoy !
From where?
Great idea and design. Kudos. Gotta have. Me...well I plan on installing in 30 seconds...gorilla tape those panels in place.
Lol
just pourchased thanks for making this!
👏🏻👍🏻
I really like this and see they are sold out. I agree it should come the factory!
I know right, thank you for watching!
Hopefully back in stock soon.
Is there a way to be notified once back in stock? (Mailing list?)
I’m sorry but I’m not sure about that. Follow me on Instagram and I’ll make sure to notify everyone soon as they do. 🤷🏼♂️
Mine just came in it’s awesome worth it! 1:18
👏🏻
You need to put these back up for 2024!
Exactly what I was looking for
Awesome!!
Awesome mod!! Very clean look...that's what I like.
Glad you like it! It surprised me in a good way from the beginning.
Nice mod. Thanks for the R & D. I just ordered one!
Your welcome! 👏🏻👏🏻
You’re going to love it, it’s so clean , it’s hard to believe it’s not OEM.
Also ordered! I'm SO glad someone is manufacturing these... Thanks!
👍🏻👏🏻👏🏻
Just purchased one after watch this
👏🏻👏🏻
Great addition, might have to order one!
Absolutely!!
Just ordered mine, Much thanks...
👍🏻
Great product easy install just watch video. You won’t be disappointed Buy One.
I appreciate that, enjoy!!
A flush mounted latch would be nice as well.
Try these for mounting your product!
Mardatt well nuts. look em up
Thanks for the tip!
@@VikingsGarage no problem, you need to make sure you apply any product with reasonable options! I may be ordering a set of the covers soon!
Thanks dude I ordered it can’t wait
👏🏻👏🏻 Enjoy!!
Don't forget to make the Gadsden Flag, Thin Blue Line, and American Flag embossed design versions.
And knowing this guy, MAGA and Putin versions too.
Now you can put a jump box, socket set, tow rope& shackles, flashlight,ECT....
I have an aftermarket cargo net to cover this and store my gear. It just installed with hook n loop tape that has started to come un-glued.
I found the cover to be super useful,
Welcome to the channel!
I couldn't believe my 5th Gen didn't come with a cover when my 4th Gen did.
I know right!! I think they drop the ball on that one.
I just ordered This.
🤘🏻
It was awesome meeting you guys today. Thank you for the patch. ?
Where should I go for service on the 18 4Runner? I took my 08 FJ to Towne for years but ended on a bad note. I’ve had a Lexus for the past few years, waiting for the perfect 4Runner. So I haven’t had to pay for any service in awhile. Thanks again. -Meghan
It was very nice to meet you , Meghan.
I appreciate your support!
I’m located at Crystal Auto Mall Toyota, just ask for Paul Tech 146.
I’ll take very good care of your Beautiful 4Runner. 😁
Enjoy the rest of your day!
@@VikingsGarage sounds great. Will be in to see you, probably September- October
I live by Lake Hopatcong So that’s an easy drive. TY!
See you then 😜
I just saw this . Pretty cool idea. Looks to be well made and a perfect fit . Maybe I missed it but how do yiu order one ?
In the videos description
I bought it and looks great!
That’s awesome, Enjoy!!
I bought one and it's really cool, but it doesnt sit flush on the right side. Keeps the stuff in but was hoping for a better fit.
i’m sorry about that, i don’t sell or make these. Matt does🤷🏼♂️
@@VikingsGarage I know, I was just letting you know how cool I think it is. I love your videos!
@AlyxD-somedogslife thank you!!
Great mod and video! Want to order but it's sold out! :( ....and he's got a nice 2022 4R!!
Thank you, yeah it sold out quick. Soon more in stock. 🤷🏼♂️
Enjoying your videos. 4Runner Skol 🍺
Where is link to 4Runner side step ?
You’ve got to turn on English Closed Caption.
Sound quality is…bad . Thanks
I will work on it.. much appreciated!!
This is such a great mod - can't wait to purchase one!
Just a quick note - love the channel, but sometimes the filming is so wobbly and moves so fast - I literally get motion sickness. I would watch all your videos but often can't make it through them because my stomach can't handle it 😂🤢.
My apologies Sir.
I’m trying my best. 🤷🏼♂️
Great idea but the price is high for that abs plastic. This isnt a necessity for that price but good job on cashing out on am easy idea
😉🤷🏼♂️
Next payday I am ordering one.
Screw it, just ordered. I've got a Snow Cap White '23 ORP. Love it. I added side steps to mine as well. Wife and kids like the truck but were having issues get in and out.
That’s awesome, great truck. Congrats!!
Enjoy the cover..
Ordered one! Looking forward to securing my gummy bears.
🤣🤣🤣
Nice cover need to get one
Got a link to the shifter boot clip you got off etsy? Also what year Honda was the boot from out of curiosity? My shifter is really worn and I was already looking to change. That set up looks really nice!
Matt he’s the one that could tell you. I’m sorry
Agreed
Ok… there’s probably a cheaper way to do this but I completed this mod after I saw it.
I bought the taco shift knob from the stealership because I assumed the many cheaper options on eBay are fake. I then bought a used shift boot assembly for a tacoma part number 35978-04010. This is the only way I found to get the clip that clips into the shift knob. Then I got a boot off of Amazon and cut the hole open a bit more to fit around the clip and used a zip tie to attach it to the clip. It looks amazing and functions great. Good luck
Thank you for sharing!! I love the re purpose of other Toyota parts 👏🏻👏🏻
Looks good! Order placed.
👏🏻 That’s awesome. I’m glad you guys agree with me, it’s a super neat and useful mod.
wow👀👀 this blew my mind😆😆😆
Man they are already sold out! I missed the video the day of release and they sold out quick!
Sorry 🤷🏼♂️.
Nice mods.
💪🏻
Brilliant!
Thank you!
It looks good too.
Thank you for watching!
I store a JBL subwoofer in there!
That’s actually pretty funny😅
Excellent!!!
👍🏻
How did your friend able to fit the tacoma trd pro shift knob on the 4runner?
Not entirely sure!!
will these work with Molle panels, looks like the latch may be hard to access behind the panels.
Laughs in 4th gen
🤷🏼♂️
I have a 4th Gen and just got a 5th Gen. They left out sooo many features on the 5th Gen that were perfect in 4th gens!!!!
-auto lock hatch
-center console table
-oil filter location
-rear window button on fob
Sigh….
Laughing and crying in JBL subwoofer.
Aaaand.. sold out. :( Very cool mod! I have added it to my favorites list on Etsy. I can understand why it would be sold out but hopefully it's back in stock soon!
I would also LOVE to know what all is required to add that Tacoma TRD Pro gear shift knob to my 2021 4R Venture!! Like, will it be a direct remove and replace swap or is that boot required?
Welcome to the channel!!
I’ll have to ask Matt next time I see him on the shifter deal.
Thank you for watching!
I have a 16 SR5 and I don’t have that compartment space. Is that a TRD thing?
Can you share the part number for the running boards? Thanks,
That would’ve been great if I didn’t have a subwoofer there. 🤣
🤣
What's the details on the shift boot cover and clip?
where did you get that shift knob?
TRD PRO Tacoma
Digging itttttt
Awesome!!
10secs in went and bought the cover.
👏🏻👏🏻👏🏻 You will enjoy it.
Parts list on how to retrofit the Tacoma shifter??
Sounds as I get an answer from Matt I’ll post it in the description.
Thank you for watching!
No I have not Sorry.
@@VikingsGarage no parts list yet??
I’m sorry buddy, I don’t Really talk to Matt, last time I asked him. He said and quote: “ the fitment is not all that great” 🤷🏼♂️
$50,000 truck and you have to do your own plastic cover… 4th gen already come with their cover
I hear you.