TURNING MY 350Z INTO A HELLCAT ! 350Z HELLCAT FUEL PUMP AND CJM FUEL RETURN KIT INSTALLATION !

How to install a 525 Hellcat Fuel Pump into a stock 350z Fuel pump housing , Also showing how to install the CJM fuel pump return kit deleting the stock relay.I had a hard time finding out exactly how to do this so i thought i would make one for anyone else boosting there VQ. I AM NOT A PROFESSIONAL MECHANIC OR ENGINEER JUST TRYING MY BEST, WITH THE BEST OF MY KNOWLEDGE FOLLOW AT YOUR OWN RISK.
Subscribe | Comment | & Like for Good Luck 🍀🙏🏼
Instagram : Alex.zeee
Cars : -Drift 350z
-Drag 350z 🏎
**Custom Turbo Kit Parts For 350z HR **
Will need aftermarket y pipe , single exit also recommend Headers and test pipes but not NEEDED .
*Turbo VSR 72/65 billet
turbo4less.com...
(Turbo brackets were made from Home Depot metal piping )
*Turbo Filter
amzn.to/39MzXqr
*VSR 44mm Wastegate Gen 2
turbo4less.com...
wg/
*Rev9 Twin Turbo Intercooler 2in 1 out
shop.redline36...
(Intercooler brackets were made from Home Depot metal slabs )
*Turbo Piping
2x www.amazon.com...
2x amzn.to/3ijcPVg
*Flanges
1x amzn.to/3CZRBnh
1x amzn.to/39NB09C
2x performancemrp...
*Clamps & Couplers
1x amzn.to/3oip48m
2x amzn.to/39LQIlt
3x amzn.to/2Y8ECAO
2x amzn.to/3ofNlf0
2x amzn.to/2Y9NC8D
1x amzn.to/2XWllSO
*Turbo Kit Plumbing
1x amzn.to/2XUJGs0
1x 20ft 4AN amzn.to/3F255R5
1x amzn.to/3ulzAMY
*Fuel Setup
6x IDX1300 Injectors
1x or 2x for twin pump Hellcat 525 Fuel Pump amzn.to/3ohpE6b
CJM Fuel Return Kit S0 VQ35HR cj-motorsports...
*Drivetrain Supporting Mods
Z speed super six Clutch ( recommend flywheel if you don’t have a light weight already ) zspeed.com/pro...
Z speed Cmak delete zspeed.com/pro...
*Gauges
amzn.to/3ulHPZq
*tires
amzn.to/3EXtvLL
*Engine Paint
amzn.to/3CS4W0P
amzn.to/3igOP4U
*Admin tuning for tuning solutions#350z #turbo350z
~-~~-~~~-~~-~
Please watch: "$2000 SINGLE TURBO 350Z DIY BUILD !"
• $2000 REAR MOUNT TURBO...
~-~~-~~~-~~-~

[@tomr1107]

nice, the electric tape on the fuel pump wiring was a good idea.

[@IceManJhey]

The fact that I needed this lol

[@Alxbmovn]

Gotchu dawg !

[@GarielMotorsports]

Thanks for doing this video Alex nice job

[@sk8mafia1O1]

The heat shrink will expand in fuel

[@oceansidepirates23]

gotta do the exact same thing on my 370z

[@Alxbmovn]

Sesh I believe it’s different but hopefully you can figure it out with the help of this video

[@jonathans-r8792]

The 08 g37 coupe should be the same since they have the same fuel assembly right ?

[@Alxbmovn]

If the assembly is the same then yes

[@justinmoody2745]

I did this swap in my g35 and I'm not getting good fuel pressure reading on my fuel regulator gauge... how is ur fuel pressure

[@Alxbmovn]

I would check the lines maybe make sure there routed correctly or the pump or you make need to drill Venturi more or maybe you did to much

[@xNo.Barzzx]

Relay install ?

[@ismaeld456]

Did you have to use a relay for the fuel pump

[@Alxbmovn]

Yea

[@2jzkicks437]

🔥🔥🔥🔥🔥

[@ismaeld456]

Do you really need to do return ? Or just install the pump with out doing anything else ?

[@Alxbmovn]

Relay kit

[@ismaeld456]

@@Alxbmovn you have a video of how to do the relay kit for the pump ?

[@Alxbmovn]

@@ismaeld456 yes

[@ismaeld456]

@@Alxbmovn I couldn’t find that video can you tag me into it

[@brezzy350z]

Did the 1/8th work out for the drilling ?

[@Alxbmovn]

Still not installed been so busy but will install shortly

[@ix0109]

@@Alxbmovn did it work out well? I need 60psi pressure for my setup