My ATV Overland Trailer is Done [Part 4] ... and then I broke it 😬
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- I finally finished the off road trailer for my quad! And then immediately broke it on my first trip out. I got about 500 miles into the Arizona Peace Trail before I had a catastrophic failure. Stay tuned for Part 5!
Subscribe: / @brobuildsgarage
![ลองสั่งของจากแอพ temu ถูกจริงหรอ?? ( part : 1/2 ) [โกงไหมครับ ep.89 ] | DOM](http://i.ytimg.com/vi/RTcZSQTiDZw/mqdefault.jpg)
You did a really nice job 👍🇨🇦
Thanks!
Excuse me, any time you use a drill, it is required you give it a test pull or two of the trigger. Not sure if you were aware of that protocol.
😂
Minimum of two! In quick succession.
Veem, veem
Trim the top sides with aluminum angle for a drip edge
That’s a great idea
Great job!
Glad I found your channel. We have many old compressor light ants sitting around trashed out. Me a trailer
Between the articulating hitch and the suspension work I think that makes it pull so much easier
I found your channel a while back and watched a few and forgot to SUB. it came back in the recommended and now i am subbed. Awesome video. Wife and I plan to build something like this for next summer. it's been a dream of mine to build one for years, just never happened. Good video. keep it up.
Thanks! I highly recommend keeping the trailer as light as possible. I haven't fixed the suspension yet, though I did get the new torsion axles. But one of the things I'm going to do when I work on it again is remove as much weight as possible.
Full grain plywood is much stronger than wafer wood, and it handles moisture much better, and, if it's exterior grade, most likely won't warp or twist. Also, if something is dropped on it will resist puncture.
Eventually I want to use a thinner wood and top it with fiberglass
Nice work on the trailer! 👍 I'll be interested to see how it holds up on the trails over time! Gotta say though...the crooked rotopax on the back makes my OCD cringe. 🤣
Oh man, me too! At least I got the water cans straight… 🤦♂️
This was a great build and that trailer turned out awesome. 👌 Utilizing the roof for a table that's an ingenious idea and I can't wait to see how it works out for you on the Arizona peace trail. Part 5 should be interesting. Once again thanks for the video content subscribed and thumbs up.👍
Nice job on that trailer, I just found your page while watching CFmoto1000 video's seen you mention your trailer build watched it and noticed we are neighbors, I too am building an ATV trailer, one I repurposed and recycled from a tent trailer from the 70's to tow behind My street bike, now being repurposed again into an offroad/atv trailer. I'm building swing arm axles for it. I'd love to join you on some trail rides etc.
Look into leaf spring shackle angles. You should be able to modify ride height and quality. With the welding practice complete, moving the shackle brackets may help.
Did you remove your lift kit or just change out the tires back to the CST's. The unfortunate reality is although cheaper the plywood is heavy. Aluminum sheet for the floor and possibly the top lid. You would have to do some fancy brace work for the lid though. Overall It came out great. Nothing ventured, nothing gained. Always learning something new.
I still have the lift kit. The tires are 29 inch Maxxis bighorn 2.0s. Honestly, with the overall weight of the trailer, I doubt the plywood lid made made much of a difference.
@@BroBuildsGarage I meant with the bottom deck, the walls and the lid. I have the Overland as well and have contemplated the lift for more ground clearance. If you ever get over to Idaho falls to ride let me know and we can do a meet up!
I wonder how air bags would do as a replacement to springs on an ATV trailer.
Nice job silicone the H20 mounts and roto pax mount 👍😊
tabanı metal yapmak daha iyi olurdu su geçişlerinde iyi olmayacak mezeme suyu emecek
Glad to see this thing in action! Cant wait to see what you do to it next!
WOW! Great idea turning the lid into a table.
I'm in Ontario Canada and my CFMOTO came with the trailer plug in already. Turn singles horn 4 way flashers.
I'm not surprised. They come setup differently for different countries.
You should put a spare tire on the trailer.
I would have needed 2 🤦♂️
Just subscribed 😊
Thanks!
Need eye hooks on side for tie downs bungee cords.
I have one on each side. Could definitely use more
Bro hat, bro hat, bro hat
Do you know of anything like this can buy
If I was gonna buy one, I’d want the Boski 1600 Aluminum ATV Trailer. Very very expensive though.
Through bolts are always a good option as one can double nut them, and that helps keep them from coming loose and falling out. I've built several trailers, and this was a plus for me.
What kind of mirrors are mounted on the CF Moto 1000?
They’re from a local dealer. Not sure of the brand but they suck. Don’t ever want to stay in place. All plastic, even the threads.
If you are ever back in Arizona near Bullhead City. Members from my group would ride a bit with you. I have a 2021 cforce 600 touring
I definitely want to go back and do at least the northern part of the loop again.
👍
Subscribed ! Great vid
Thanks! Subscribed right back!
Outstanding build
Thanks!
Great build … great channel
Why is the rear fuel can crooked?
😩 I know, I thought I had it straight