MUST WATCH - Mechanical Assembly - EGD Grade 12 - Paper 2
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- Team HowToEGD!! This is it, your last opportunity to absolutely SMACK your final exams!
I champion you and I know that with determination and hard work you can absolutely SMACK your upcoming Prelims and Finals.
My FINAL advice to you: Draw - Draw - Draw as many drawings you can under similar time constraints to what you will have in the exams.
SUGGESTED TIME BREAKDOWN FOR PRACTISE DRAWINGS
15min for Analytic Questions
30-35min for all other drawings such as Isometric, Two Point, Etc.
90min for all Civil and Mechanical Assembly Drawings
You will not have more time than what I am referring to above, therefore, please do not in your preparation use more time than stated above. You have to practice until you can finish these drawings within the given time frames,
PREVIOUS EGD EXAM PAPERS - FREE DOWNLOADS WITH MEMO'S
To further assist you, please download the previous EGD exam papers here.
drive.google.c...
All the best!
Now it really is your turn.
![[TH] FS vs BME - VCT Ascension Pacific - Lower Bracket Final](http://i.ytimg.com/vi/wnygqsR2Fig/mqdefault.jpg)
Who else is here the night before the exam like I am?
Cleavant, I trust it went well with your exams today...
Mine is in 2 hours 💀😭
Me😅😅
Same g 😳🤝
Try morning b4💀
Stefan said night before and I'm here the morning of the paper😭
Same
Nothing but vibes and hopes for this paper 😭😭
😊
Me too .😭Super stressed
thank you so much sir for the assistance with pat, managed to score 85%
Whohooo Levi. That is great news! So happy your hard work got rewarded! Now on to Finals!
I think i finished every single one of your vides for finals. Hope im ready. Thank you Sir
Awesome Yusuf! Trust it went well. Please give me some feedback via the Quick Poll in the Community Tab!
Im here watching this 5 hours before the test
🤣🤣🤣I'm writing at 2
Go Smack It Rudolf!
Go for it Heshlin!
Sir can you please...tell me the parts that should not be hatched
Easy Answer Lesedi: All components used as fasteners: Washers, bolts, nuts, Keys, Rivets, etc... and shafts... all the best for #2
@@HowToEGD thanks sir
Dankie... ek skryf nounou
Hi Dylan, thanks for the comment. Let me know how it went today...
Writing finals tomorrow hope it goes well😂
Ziggy, thanks for the message!! Make sure you SMACK Paper 2!! All the best!
Same here
I'm watching the video the night before
Better for you who are watching than those who don't... please share with your friends... All the best for tomorrow!
Hi sir is it possible to send the memo for the p2 we wrote
Hi Best Music, if you are in the Easter Cape, you are welcome to visit www.ecexams.co.za to download the Memo... cheers
@@HowToEGD thank you sir
Hi sir, I'm not exactly sure what the line in the middle of a half section should look like..? In the JPEGD workbook it said that it should be a light solid line, but in the memo's of these assembly drawings, it is still a center line.
Great question Annika, I told my learner's to keep it a centre line as per Memo's... I am going to follow-up up with JPEGD regarding this for clarification. All the best...
@@HowToEGD Thank you, sir!
Thank you
You're welcome Zues.
I wanna pass EGD
Yes!! You can!! Work hard and All is Possible!!
I am writing in 1hour so this helps a lot
Go Smack It!
Alright where’s the maritzburg college guys watching this the night before 👀👀
Jason, thanks to you and all the other Maritzburg guys for following HowToEGD. All the best with your exams...
@@HowToEGD thanks sir. You’re actually quite a famous here. Helped out a number of us throughout the year
What a privilege...
Hi Sir, how many Mechanical assembly drawings do you recommend we do/practice before a test?
Hi Richard, great questions, thanks you. Back when I was in Grade 12 my teacher gave me copies of all the EGD exam papers for the past 8 years and I made sure I drew each and every one of those drawings leading up to finals. The more you draw, the more confidence you gain... All the best for your own finals!
This came in clutch thanks so much 🤝
Tariq. Now don't take your foot of the pedal... finish strong! Draw Draw Draw...
Not even the night before but 3 hours before 😂💔
Lmaoo same
Go Smack it Cheznay!
@@HowToEGD will do and thanks your videos are extremely helpful
@@sammy_g1974 EGD is where the dangers at😂😂
more like the morning of the paper, cause I couldn't be bothered anymore😂
(-:
How do I know what needs to be cut and what not.. Eks afrikaans askies..wat word gearseer en watter nie?
Hi Stefn-Ann, the easy answer: All components used as fasteners: Washers, bolts, nuts, Keys, Rivets, etc... and shafts... all the best for #2
@@HowToEGD Thank you so much 😱
“If you’re watching this the night before the exam, I’m worried”
Me an hour before: 😅
Love the comment (-: Trust you also drew some actual drawings in preparation for today!! All the best!! Draw with confidence!
@@HowToEGD yes well I died. The isometric made absolutely no sense 🥲
Watching it at like 12:42 the night/morning before my test💀
Hope you got some sleep...
@@HowToEGD yep got like 5 hours of sleep so I was fine. I just took to long on the mechanical assembly drawing so I could'nt finish in time. But the video helped a lot. Thank you for the great video man
same but its 1:41 lol 😭
Man’s is way better than my teacher
David. Go Smack your Finals!