Hi Mr Mills. Thank you very much - i don’t have a Patreon page, since all this came is a bit of a surprise to me. I did not think that anyone would watch my videos. 😊 But my channel monetized a few weeks ago, and I have enabled Super Thanks. I am not sure how it works exactly, but I think that you can send something that way 😊 I might enable channel memberships at some point, but the super thanks are all I got right now 😊 Thank you very much for following along in all the videos, it means a lot that people are so supportive 😊
Thanks for the video! Also, it would be very interesting to learn how to work with "phaser" and "MAtricks". How to do the division into blocks, wings, and so on for 3 versions.. Thank you in advance!
It's probably worth mentioning the Auto Stomp sequence setting. Switched on, any absolute value coming from a cue in this sequence will automatically stomp any potentially running phaser for that value coming from anywhere else.
You make really good videos. Can you do one with the Robe Spiider? It has sub-fixtures. How do I handle this? Maybe you can make a video about it. Best regards Frank
Can you go over making quicker symmetrical and asymmetrical circle phasers in this update again? Also an update on how to "park fixtures" in this new update, as of course its not available in 2.
Thanks for the video! Question : I want to create a Snap effect on fixtures (sunstrip active for exemple) and I would like the effect to start at tempo, so what is the method to playing BPM ? Thank you again for your videos
Thank you for your videos and the great teaching you do! Awesome speed and just the right amount of in-depth information :) on that note, just for youtube sake; You should consider adding some reference to this video in the "14 settings you need" video description, or vice versa.. I saw that video and I was looking for a way to assign bpm control, learn speed, speed master through all your previous videos before finally catching this one. I dont regret watching everything at all, just saying I wish I could find it easier.. I'm just learning MA3 (previously worked on M-PC/Onyx, then in ETC Cobalt at the theatre and now I'm back in a rental company that just got an MA3 cmd wing..
Thank you @ivanpavlovic5797 🙏 You watching all the videos are a good thing for my little channel, and i never really go back and change the description on the older videos. 😀 I can see the problem, but then I would need to add link the every possible scenario people would come across, and I don´t think that would be possible for me to imagine 😀 How do you find MA3 in a theater environment, compared to ETC? There seems to be a few things people are use to on ETC that works different on GrandMA3?
@@Event-Lighting Correction; i dont use MA3 in the theatre, im in a rental company.. The theater i worked at would never move on to something other than ETC because most of my "older and more experienced 😑" former colleagues arent interested in learning a new workflow and sometimes even resisting any new ideas that come. Recently, during covid 2021/2022 we got a new console, an ETC gio@5, and that one still to this day is sitting in a cardboard box and its not used because they find the old Congo sufficient and dont want to learn basically... You can see now why i dont work in that theater anymore, I'm 26 years old and the last thing i want for myself is to stagnate with my skills and become like them.. Its easier to move on and try something new than to argue with coworkers to try to change their opinion..
I am struggling myself with making reliable position effects, mainly the struggle is getting relative positions to work, have you some insight to share there? I mostly use tempfaders for my effects when Im busking :)
Is there a reason to store the Blue/Cyan phaser effect as an All preset, instead of just storing it as a color preset ? (same with pretty much any parimiter, a dimmer effect would make sense as a dimmer preset for me)
I’ve been storing effects into their representative preset. Dimmer effects into the Dimmer preset, colors into color presets etc. Any disadvantages doing this instead of using an All Preset (if my phaser effect is just working on one parameter at a time)?
@@Event-Lighting And how can I see if there is a Stomp stored inside a cue and how can I perhaps get rid of it then and how is the stomp really added to specific parameters (like only colors e.g.) - is it only possible if you use Parts?
I would love to support your tutorials. I already have my hardware, do you have a Patron page?
Hi Mr Mills.
Thank you very much - i don’t have a Patreon page, since all this came is a bit of a surprise to me. I did not think that anyone would watch my videos. 😊
But my channel monetized a few weeks ago, and I have enabled Super Thanks. I am not sure how it works exactly, but I think that you can send something that way 😊 I might enable channel memberships at some point, but the super thanks are all I got right now 😊
Thank you very much for following along in all the videos, it means a lot that people are so supportive 😊
Just got to say that even though I am an advanced MA3 operator. I still check out your videos as they are very clear and precise. Well done 👏🏻
Hi Sonyvaiboy. Thank your very much - that means a lot to me. 🙏🙏🙏🙏
Tutorial that's gets right to the point, short and informative! Thanks! 😀
Thank you Cirkusapan 👍
Thanks for the video! Also, it would be very interesting to learn how to work with "phaser" and "MAtricks". How to do the division into blocks, wings, and so on for 3 versions.. Thank you in advance!
Good point - i will make a more in-depth video about that 😀
It's probably worth mentioning the Auto Stomp sequence setting. Switched on, any absolute value coming from a cue in this sequence will automatically stomp any potentially running phaser for that value coming from anywhere else.
You make really good videos. Can you do one with the Robe Spiider? It has sub-fixtures. How do I handle this? Maybe you can make a video about it.
Best regards
Frank
Good idea, i will consider that topic for a future video :-)
Can you go over making quicker symmetrical and asymmetrical circle phasers in this update again? Also an update on how to "park fixtures" in this new update, as of course its not available in 2.
PLEASE KEEP MAKING VIDEOS!!! YOURE THE BEST
Thanks for the video! Question : I want to create a Snap effect on fixtures (sunstrip active for exemple) and I would like the effect to start at tempo, so what is the method to playing BPM ? Thank you again for your videos
Nice clean tutorial, thanks 😃
Thank you Matix Gaming 🙏
Thank you for your videos and the great teaching you do! Awesome speed and just the right amount of in-depth information :)
on that note, just for youtube sake;
You should consider adding some reference to this video in the "14 settings you need" video description, or vice versa.. I saw that video and I was looking for a way to assign bpm control, learn speed, speed master through all your previous videos before finally catching this one.
I dont regret watching everything at all, just saying I wish I could find it easier..
I'm just learning MA3 (previously worked on M-PC/Onyx, then in ETC Cobalt at the theatre and now I'm back in a rental company that just got an MA3 cmd wing..
Thank you @ivanpavlovic5797 🙏
You watching all the videos are a good thing for my little channel, and i never really go back and change the description on the older videos. 😀
I can see the problem, but then I would need to add link the every possible scenario people would come across, and I don´t think that would be possible for me to imagine 😀
How do you find MA3 in a theater environment, compared to ETC? There seems to be a few things people are use to on ETC that works different on GrandMA3?
@@Event-Lighting Correction; i dont use MA3 in the theatre, im in a rental company..
The theater i worked at would never move on to something other than ETC because most of my "older and more experienced 😑" former colleagues arent interested in learning a new workflow and sometimes even resisting any new ideas that come.
Recently, during covid 2021/2022 we got a new console, an ETC gio@5, and that one still to this day is sitting in a cardboard box and its not used because they find the old Congo sufficient and dont want to learn basically...
You can see now why i dont work in that theater anymore, I'm 26 years old and the last thing i want for myself is to stagnate with my skills and become like them..
Its easier to move on and try something new than to argue with coworkers to try to change their opinion..
I am struggling myself with making reliable position effects, mainly the struggle is getting relative positions to work, have you some insight to share there? I mostly use tempfaders for my effects when Im busking :)
hi is it possible that you could do a vid on how to set up internal and external timecode?
Can you make a tutorial on how to control lasers. I’m super confused about it. Thanks
Thank you for this great video
Thank you Peter 😀
Is there a reason to store the Blue/Cyan phaser effect as an All preset, instead of just storing it as a color preset ? (same with pretty much any parimiter, a dimmer effect would make sense as a dimmer preset for me)
I’ve been storing effects into their representative preset. Dimmer effects into the Dimmer preset, colors into color presets etc. Any disadvantages doing this instead of using an All
Preset (if my phaser effect is just working on one parameter at a time)?
Do you need to stomp the color ? or would it be enough to just select fixtures, stomp and store ?
Hi Emile
Stomping the entire fixture is fine, but it was just to let you know that you can stomp single parameters 😀
@@Event-Lighting And how can I see if there is a Stomp stored inside a cue and how can I perhaps get rid of it then and how is the stomp really added to specific parameters (like only colors e.g.) - is it only possible if you use Parts?
Is there anyway to get internal time code to follow along with music without having to buy ma hardware?
phaser engine is the worst nightmare......