You, Sir, are a genuine artist! Truly beatiful work! 2 little tips from a fellow knife lover... Making a little rounded radius where the blade meets the tang helps to prevent the blade from breaking at the handle. Heating the tang with a gas torch until light blue also helps with this issue. I hope I may one day aquire 1/10th of your skills at the belt grinder. Truly a joy and an honor watching you work. Excellent work with the filming and editing, also. Thank you very much!
Jon Swift. I agree. This takes to much concentration and is to much hard work for the youth of today. Unfortunately they are always being told that knives are bad and therefore knife owners and makers are bad. When it is the person and not the tool that is to blame for using it as a weapon. They should (in my opinion) be taught to be responsble and respectful. Then the knife loses it's danger and becomes once more the tool that countless générations of men have carried and used everyday of their lives. Sorry about the ranting.
He did a lot off-screen, probably the heat-treat as well. Besides, the description says "heat treated high speed steel", although I doubt it was pre-heat treated. It doesn't have to have a hamon to be a tanto. Some commenters need to read up more about Japanese blades.....
aquele negocio que ele passa no cabo de madeira por ultimo que da o brilho é verniz? qual o nome especifico dele? acho que nao deve ser veniz pq ele passa com pano, verniz iria grudar lã do pano na madeira
hmm, dunno if that is plastic he glued onto the sheath but it doesn't seem sturdy. I'd advise cutting a small opening into the part of the sheath that holds the edge of the blade and to insert a piece of horn in order to protect the sheath (and your hands) from the blade, as it could split the sheath after prolonged use.
That 'plastic' is G10 my friend... Given sufficient thickness it's ballisticly rated... As in used on the underside of armored personnel carriers to shield against IEDs.
I have been a subscriber for a while,you have many different skills and are good at them,just wanted to say thank you for sharing them with us,all the best to you and your family my friend 😎👍👌✌🐉🐲
Извените пожалуйста меня, я не специалист по таким изделиям. Но не придаёт шарма такому ножу то что он практически собран на "коленке". Может я чего то не понимаю, но точно знаю что такое не должно делаться на - и так сойдёт... А так нормально получилось.
Go for it, man. I've been making knives for a few years now and it's a lot of fun. But big heads up with knifemaking. I can almost guarantee that you will fill a 5 gallon bucket with semi-knife shaped chunks of scrap steel before you get a decent knife. So I would start with mild steel from home depot just to get an idea of what it's like before you move onto good expensive steels. Also GET A RESPIRATOR. I cant begin to stress how important it is to buy a GOOD respirator. Like the ones from home depot with the pink filters that looks like a gas mask. All the dust that comes from knifemaking can EASILY give you lung cancer, COPD, or any number of other terrible diseases. So trust me. The $60 respirator is worth an extra 20 years on your life.
지화자입니다
구독과 좋아요~감사합니다
인스타그램 instagram.com/zihwaza/
블로그 zihwaza.com/
하이스강을 이용한 장도입니다
한국식 장도라고 해야할지 일본식 단도라고 해야할지
정체는 사실 잘 모르겠습니다 .
그냥 멋있는것 같습니다 ㅎㅎ;;
핸들은 제브라우드를 이용하였고
가죽끈을 이용해서 핸들에 나름 멋을 조금 내보았습니다
가죽끈을 감는방식은 Tsukamaki Wrap 으로 검색을 해보셔요
열처리가 된 고속도강(하이스강) heat treated highspeed steel
전체길이 280
날길이 140
핸들 제브라 g10
제작은 제조허가를 득하고 제작을 하고있습니다.
관계기관에 허가없이 칼을 만드는건 불법입니다.
따라하시면 관계법에 의해 처벌받을수있습니다.
만드신 칼들은 판매 안되나요?
혹시 만드신거 판매도 하시나요?
블로그에 판매 가능한 나이프는 올려 놓으시면 좋을듯합니다 거래내용은 비밀댓글로 하면 됩니다
찾아가서 나만의칼을 만들어보고싶네요.
뭐뿌린거애요?
You, Sir, are a genuine artist! Truly beatiful work!
2 little tips from a fellow knife lover...
Making a little rounded radius where the blade meets the tang helps to prevent the blade from breaking at the handle.
Heating the tang with a gas torch until light blue also helps with this issue.
I hope I may one day aquire 1/10th of your skills at the belt grinder. Truly a joy and an honor watching you work. Excellent work with the filming and editing, also.
Thank you very much!
Nice advice dude
incredible build love the wood you used for the handle and the sheath plus how you sanded the together very well done all of it
Похоже, что буду первым русским, который оставит здесь коментарий. Красиво сделал. Уважаю мастеров своего дела.
Great job, gives me an idea for a broken bayonet blade. Your weave on the handle really makes the knife.
Судя по комментариям ,Андрей вы вышли на международный уровень! Так держать!
지화자님! 팬입니다!
(국내 칼 만들기 채널은 지화자님이 최초인 듯...)
ㅇㅈ
이정도면 직업으로 만들어서 파셔도 될듯....저처럼 사냥과 낚시를 좋아하는 사람은 최고입니다.
한국분이 이런거 만드시다니 자부심생깁니당
Прекрасная работа!!! Отличный нож!! Мастеру мой поклон!!!
칼을 만드시는군요. 저는 3D 프린터로 다양한것을 만들어요. 반갑습니다. 50만 구독자 부럽네요. ^^
Beautiful !
A loving fan from France.
Can you do twin mini double edge blades with single sheath to carry them both. Like concealed carry thingy
I think the edge wasnt hardened? Or does it need to be?
제목이 솔직해서 기쁘네요
хвостовик сойдет , но плавнее переход надо ,так как здесь будет концентратор напряжений
Is there any reason why the blade is just glued to the handle? Saw that on another tanto knife video as well.
That is a fantastic job. You need to teach us how to tie those knots in the leather.
Also how to freehand that grind you did on the blade...it was perfect.
I like it..from Indonesia( Kendal,central Java )
Perfect 👌🏼 Sadly, the UK is losing this kind of craftsmanship
Jon Swift. I agree. This takes to much concentration and is to much hard work for the youth of today. Unfortunately they are always being told that knives are bad and therefore knife owners and makers are bad. When it is the person and not the tool that is to blame for using it as a weapon. They should (in my opinion) be taught to be responsble and respectful. Then the knife loses it's danger and becomes once more the tool that countless générations of men have carried and used everyday of their lives. Sorry about the ranting.
They're still people out there in sheds building amazing things.
UK has Alec Steele, you guys are good
I was gonna say the same about Alec .
No worries Alec Steele is there.
I wish there was some why to tell which way the edge of the blade is facing while the blade was in its cover....
이봐 이 분은 손잡이가 예술이라니까
대충슥슥 그려서 만드는 것 같은데 넘나 멋진 칼이 되서 신기해요~!!
Finally, a TH-camr from Japan or Korea that doesn't make me say "WTF?!". Nice.
What kind of height scribe is that to find the blade center. I can't find one. Great videos!!
Very nice knife good job
What kind of metal do you use & the thickness?
5:45, what is that?
Beautiful knife btw
Epoxy glue
Consulta no le hiciste tratamiento térmico a la hoja?
칼이 참 멋집니다.
디게 가지고 싶은게,칼이라는 도구라기 보단 무슨 작품 보는것 같네요.
That is fantastic. Do you always get your steel already hardened? I never see you heat treat your blades.
Sam Harper I was wondering why he didn’t heat treat it as well.
Very very Nice! Beautiful Knife!
되게 닌자들이 뒷춤에다 숨겨놓고 쓸꺼같은 깔이네요!!
대단 하시네요~ 감탄이 절로~~~
확실히 제 소확행은 똥싸면서 자화자 시청인거같습니다.
(이만한 힐링 없습니다?!)
흠. 10분 29초 동안 똥 싸셨군요. 빨리 나오십쇼. 치질 걸립니다 ㅋㅋㅋㅋㅋ
댓글 내려보는중이었는데 공감이 되는군요 허허헣
ㅋㅋㅋㅋㅋ뭔가 차분해져요 영상보면
@@tetrabaenasocialis834 전 걸려서 수술했습니다 ㅎㅎ
Nice where I can buy for it
good job! well done! good luck! 👍🍀
디자인 무진장 이쁜데요?
이번거도 야나기바 느낌이 있네요 낚시할때 좋을듯 ㅎㅎ
Another beautiful knife
Gorgeous piece brother!!!
점차 발전해가는 과정의 디테일에 반하고 갑니다 처음에 강재 자르실때 윈덱스 쓰시는거 보고 깜짝 ㅎㅎ
Very nice. How much for that knife?
He did a lot off-screen, probably the heat-treat as well. Besides, the description says "heat treated high speed steel", although I doubt it was pre-heat treated. It doesn't have to have a hamon to be a tanto. Some commenters need to read up more about Japanese blades.....
watching his earlier videos he's shown the heat-treat process in some of them, so i assume that he did so, but maybe didnt think he needed to show it.
칼의 용도가 궁금합니다 ㅋ 모양을봐선 찌르기용 같기도하고 칼자루에 끈을 감은거봐서는 고기나 생선을 다루는 칼도아니고 ㅋ
Very nice . Good job!!!👌
how much for the same knife but with a Full Tang ?
aquele negocio que ele passa no cabo de madeira por ultimo que da o brilho é verniz? qual o nome especifico dele? acho que nao deve ser veniz pq ele passa com pano, verniz iria grudar lã do pano na madeira
É algum tipo de óleo, talvez linhaça
하아..진짜 왤케 디자인 멋지냥...나중에 단검 하나 사서 대리만족이라도 ;ㅅ; 크흡
지화자형님이 만드신 칼로 요리를 하고싶어지는걸?
Eu pensei em por uma ponta no final do cabo como uma flecha pra que fique mais seguro e o cabo não acabe saindo
Nice work as usual
Yapıştırıcı markası ne usta rica etsem söylermisiniz
Do you sell any of the knives you make ?
How much for a knife exactly like that? Please send me a message
what is this material that is given here in the knife edge?
크이거지 이거야! 내가원한건이거야! 간지나는사시미칼크으으 미쳤다 저칼을만져보면 딱고무재질에 크으말해모해 간지난다진짜
hmm, dunno if that is plastic he glued onto the sheath but it doesn't seem sturdy. I'd advise cutting a small opening into the part of the sheath that holds the edge of the blade and to insert a piece of horn in order to protect the sheath (and your hands) from the blade, as it could split the sheath after prolonged use.
That 'plastic' is G10 my friend... Given sufficient thickness it's ballisticly rated... As in used on the underside of armored personnel carriers to shield against IEDs.
@@remcovanvliet3018 AS i said, i didn't know it wasn't plastic
The name of the lattice that I put on the wood is urging the shine ??? Thanks
Definitely one of my favorite knives you made
제목이 아주 정-직하군요
그래서 단조기법은 언제 쓰실거죠?
저희 집에 오래돼고 안쓰던 칼이 있는데 칼 손잡이랑 칼날을 잡고 싶은데 이찌하오리까...???
Hey I just started making knifes and you just blows my mind 🤯 that maby I can make a knife like you
I have been a subscriber for a while,you have many different skills and are good at them,just wanted to say thank you for sharing them with us,all the best to you and your family my friend 😎👍👌✌🐉🐲
exelente un gran trabajo de artesania . FELICITACIONES
Can I get one like that
Отличная работа !
Absolutely stunning!
I would like to have this knife. How to contact you ?
직접 만드는 칼도 도검신고 해야하나요?
이번 칼은 아주 끝내주네요!
Uma obra de arte , linda , parabéns
저도 하나 제작할수 있는 기술과 작업장이... 부럽네요
한자루 갖고싶습니다 캠갈때 쓰면 짱이겠네요
Very beautiful! Congratulations!👏👏👏👍👍🙌
Muy bonito. Gran trabajo. Enhorabuena.
동여상에 설면도 같이있으면 더 좋을것같아용
Excelente cuchillo, ideal para pescadores
What kind of wood is the handle and sheath made from ?
Not sure but looks like zebrano to me
Извените пожалуйста меня, я не специалист по таким изделиям. Но не придаёт шарма такому ножу то что он практически собран на "коленке". Может я чего то не понимаю, но точно знаю что такое не должно делаться на - и так сойдёт...
А так нормально получилось.
구독하였습니다. 혹시 추후에 도움을 받거나 제작하신 칼을 구매할 수 있을까요?
동양풍의 검을 좋아하여 해당 영상의 길이정도의 단도를 편지칼정도의 수단으로 소지하고 싶습니다.
안녕하세요 지화자님
전 선상낚시를 좋아하는데 이칼을 날만 사시미칼형태로 바꿔서 주문제작도 가능할까요? 해외거주중인데 도검류 해외택배가 되는지 확인도안하고 우선 보자마자 너무 가지고싶어서 질문부터 쓰고있네요,.. 항상 잘보고있습니다. 다마스커스 검도 만드시면 좋을것 같습니다^^
항상 멋진 영상 올려주셔서 감사합니다.
^^
Can I order it to Vietnam? it's really awesome
How much is this knife?
칼집에 공간을 파낸 전동장비는 무었인가요?
Nicely done. That's a beautiful piece.
칼 멋있네요 잘보고 갑니다
Beautiful
Просто супер красавчик 👍👍👍👍
이걸 이제서야 보내요ㅋㅋ 잘봤습니다. 근데 칼집 속을 칼날 모양대로 속을 파내서 반대 방향으로는 안들어갈듯 싶네요ㅎㅎ 딱히 많이 쓸일이 없는 거의 관상용 칼이니까 크게 상관은 없겠지만요ㅎㅎㅎ
That’s- that’s not a tanto. That’s a drop point. Beautiful nonetheless, but title is wrong.
세상 최고의. 단도다
Holly crap. I know what my new hobby is gonna be now.
translate:거룩한 꽃게! 나는 내 새로운 취미가 무었이 될건지 알것같아.
@@VinelElgrant 거룩한 꽃게 무엇ㅋㅋㅋㅋ
Go for it, man. I've been making knives for a few years now and it's a lot of fun. But big heads up with knifemaking. I can almost guarantee that you will fill a 5 gallon bucket with semi-knife shaped chunks of scrap steel before you get a decent knife. So I would start with mild steel from home depot just to get an idea of what it's like before you move onto good expensive steels. Also GET A RESPIRATOR. I cant begin to stress how important it is to buy a GOOD respirator. Like the ones from home depot with the pink filters that looks like a gas mask. All the dust that comes from knifemaking can EASILY give you lung cancer, COPD, or any number of other terrible diseases. So trust me. The $60 respirator is worth an extra 20 years on your life.
is it hiking?
@@zeezeazee I wouldn't consider hiking to be a hobby friend.
지화자님 사이트 하나 만들어서 지화자님이 만든 물건 파실생각은 없나여?
No heat treat?
Really awesome amazing work I really appreciate it you did an amazing job... Just it's not tanto
Maravilloso una obra de arte saludos de Chile de Luis Felipe delgado rodriguez un hermoso cuchillo japonés
1:28 기분 순간 좋았다
가정에서 칼만드는것이 불법이로군요.. 좋은정보 감사합니다..
Very beautiful! Congratulations!
7:41 watch your tumb
Dude straight up cut his thumb, you can hear him wiping his finger a few seconds after
저런것 만드는 곳이 따로 있나요 ? 어디서 해요?