ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
✅ ANSYS Design Modeler - Pipes Y-Shaped/T-Shaped - Intermediate Tutorial 4
ฝัง
- เผยแพร่เมื่อ 19 ก.พ. 2018
- ************************* Donation: **********************
PayPal: www.paypal.me/...
Bitcoin: 3MEiS2XFQcDxZESbVF7HErDU7Fp55UxTBV
*************************************************************
Computational Fluid Dynamics
#AnsysDesignModeler #DesignModelerPipes #AnsysDesignModelerYShaped
cfd.ninja/
ANSYS
Thank you for the demonstration. It was an enjoyable karaoke session
Thanks, it seems you like to sing, good luck
@@ansys_cfd The demonstration helped me in the process of making a parametric model of a T-junction
Thank you so much. This tutorial is amazing.
Thank you!
I am working in my individual project. Your tutorial help me. Thanks
I am glad that this tutorial can help. Best Regards
this helped a lot. However, if I am trying to make a pipe that extends in to 3 branches, which is the only thing I want to create, do I still need to do the 0.215 thing? I am asking because I only want the mesh to be for the fluid flow region and the three branches (3 exits), each have a different diameter
Very clear thank you. however, Can you please explain to us what does mean add frozen and why you add it ?
Hi friend, Of course, Add frozen is an option when you apply an extrusion (Add material is another option) and it is necessary because with Add frozen I will create two bodies in change if I use Add material I will create one body only and in this tutorial I need separate the bodies then use Subtract tool. Regards
Thank you
You're welcome friend
Best regards
Hi sir, is it possible for you to teach, draw two pipes with weld joint between them?
Thanks 😀
Hello, if the parent pipe and daughter pipes have different diameters then how to generate the geometry? Does "sweep" works? Thanks!
Hi friend;
For that is necessary to create another constraint, I will try to do it soon.
Regards
how if the diameter in the branch is changing ? just like in the real penstock bifurcation application (there is a gradually change in diameter at the beginning of the branch). may you tell me how to make it ?
Can you do the cfd analysis tutorial of an over expanded nozzle flow?
Hi friend,
You refer to this:
ANSYS FLUENT
cfd.ninja/ansys-fluent-convergent-divergent-cd-nozzle/
ANSYS CFX
cfd.ninja/convergent-divergent-cd-nozzle/
Regards
Thanks for the help. 😊
Well,there is no domain created around nozzle(for analysing the exhaust plume patterns) in referred link video.Can please you do a proper Ansys Fluent video tutorial?
Sir i knw a lot from ur tutorials bt i stuck in one thing which is....i work on straight blade vertical axis wind turbine n wanna do structural analysis so i want to knw how to apply load and spprt n where to apply it. Plzzz hlp meh sir plz plz plz
Hi friend;
What kind of load do you want to add? Pressure, weight, another?
Regards
Hi, CFD Ninja.. Thank you so much for this tutorial. But I still have a question. Is it possible to mesh a 45 degree junction with all structured meshing? Or if its not possible. Can I combine the mesh, structured hex mesh with unstructured mesh? Thankyou so much. And how can I contact you to have a better communication? Thankyou so much, Bro..
Yes friend, that is possible. Maybe this tutorial can be help:
cfd.ninja/ansys-meshing/ansys-meshing-hexahedral-mesh/
Best regards
Hello cfd ninja.. Can u made a private toturial for my case , i am phd student and i have no time to learn ansys, and you will gain some money ..
How can i contact with you?
Hi friend, At this moment I don't have time, but please send an email with your case to support@cfd.ninja
someone can help you. Regards
CFD.NINJA ANSYS
Could you give me your whats up number??
Can I import wire frame from catia and do the same procedure?
Hi friend,
You need step, iges ir parasolid formar.
Regards
@@ansys_cfd I saved the file as igs but when I import it into ansys ,I couldn't see anything
how i can model it from shell
Hi friend, Can you explain more about your query?
Regards