Step by step guide to how to assemble the Ikea Vangsta Dining Table. Tools you will need: Drill Driver: geni.us/jyKBt Disclaimer: If buy from the link above I receive a small commission which helps fund the channel. If this helps you, please consider liking and subscribing. Any questions or feedback - please leave below!
@@FixItWithJon I started a first leg by following your instructions. Yes, at first I put a screw and tight by hands then used ikea equipment. I got stuck at the middle way. Thanks for your reply and greetings from Bangkok.
@@salmonsalmon2893 Ah! Greetings from London :-) Ok - so it's important to do all the legs up by hand first without use of the tool. Then, when they're all done up loosely, you can go back around each one and do up tightly with the tool. They all rely on the structural tension of each other, so you can't do one up tight without the others being present. Hope that makes sense? Let me know how you get on?
Step by step guide to how to assemble the Ikea Vangsta Dining Table.
Tools you will need:
Drill Driver: geni.us/jyKBt
Disclaimer: If buy from the link above I receive a small commission which helps fund the channel.
If this helps you, please consider liking and subscribing. Any questions or feedback - please leave below!
Excellent tutorial…you just saved me a ton of mental effort (so much easier than trying to follow the instructions! Thank you!!
@carol Gigante so glad that it helped you :-)
7:27 this point was so difficult to follow on the paper instructions but your video helped. Highlighting the correct sides would help alot!!
Thanks Mate
Very helpful.
Ikea instructions a nightmare to follow 😁
@paulsmith2552 Really glad it helps buddy :-) It was a head scratcher for a while that one lol..
Thank you for your video, massive help
Thanks so much for this!! Super helpful
Thank you sooo much for your help .
Really glad it helped 🙂👍
Thanks
@virginiavieira2408 Really glad it helped :-) Thanks for the comment!
I can’t make legs tight
@salmonsalmon2893 Sorry to hear that pal - what's the challenge specifically? Are you doing them all hand tight first? Let me know how you get on..
@@FixItWithJon I started a first leg by following your instructions. Yes, at first I put a screw and tight by hands then used ikea equipment. I got stuck at the middle way.
Thanks for your reply and greetings from Bangkok.
@@salmonsalmon2893 Ah! Greetings from London :-) Ok - so it's important to do all the legs up by hand first without use of the tool. Then, when they're all done up loosely, you can go back around each one and do up tightly with the tool.
They all rely on the structural tension of each other, so you can't do one up tight without the others being present. Hope that makes sense? Let me know how you get on?
Not the widest table I've seen.
Nope, not the longest I’ve seen either (ohh err)