Mitigation/Restoration guy here. I have saved whole condo buildings with PORTABLE extraction. We use dehu’s and air movers for the evaporation, but extraction first. Pulls >80% of the moisture out. Less time to dry, less risk of mold catastrophe.
I’m talking multiple floors, dozens of units affected after pipe ruptures. Tens of thousands of sqft soaked and ready to mold. Walls and ceilings caving in
Good job man, yeah my mount went down 2 weeks ago permanently. Ended up in Sacramento, getting another one from Proline. We still have to meet up sometime.
@@hittyman4023 unfortunately Rotovac only manufacturers them with a 500 psi or 220 psi pump, so you would have to use a water otter to run a spinner tool. However for me, because I own a janitorial and floorcare business; I have 6 six extractors plus 8 floor scrubbers and CRB' s so it's not an issue for me.
Hi pal. Sorry to hear the tm is in the shop. Portables have came along way as you probably know and that portable could do with a vacuum upgrade to 2 x 6.6 lambs. It sounds like it has 2x 5.7 motors. When I have to use my portable it’s either on the van or at the door outside the home. It obviously saves the lifting. I know it’s only temporary but it will make a huge difference to the dry times and lugging around. Great video👍🏻
If youve got the dual 2 stage, its most likely around 95 cfm, these units usually made with vacs in series which limits the CFM, the newer rotovac monsoon or mytee breeze is closer to 225 cfm as they are in parallel
Just an anecdote from owning/operating LX, Rotovac, Mytee: Actually one of the really unique things about LX Mytee Vacs, and Monsoon Rotovac motors is their Single stage motors and are in fact placed in Series not Parallel. This vac arrangement for both Monsoon and Mytee is optimized for keeping the auto dump running smoothly/keeping up. To have dry carpets (lift) and power at the wand the standard to aim is 12.5" mercury and 250cfm which can allow a functional 100' of 2" hose. Anything less than 100' then yes an old Speedster with Parallel HP 3stage is comparable. Every system has its place for bigger upholstery clean (50booths) I use Mytee breeze with air hog (150') and it's the perfect balance.
@@runzization I have a ton of Mytee machines I don't hate them but I'll be selling of of them in a few weeks from now. I've been wanting to build my own ETM with 4 vacs and it's almost completed I'm just excited.
@@greenrhinoproject Right on, that’s not too bad.. I see a portable in my future, right now I’m just trying to get started with VLM and I’m struggling just to get my first couple jobs booked.. Boosting FB posts is not working and I’m about to try google ads.. Anyway, thanks for the videos and inspiration on TH-cam and TheCleanUp!
Hey all. I appreciate all the content, as well as reading the comments for more information. My question is Using a portable. Keeping it in the van or at the doorstep, upgraded with the Vacuum booster Filter And heat booster How does the portable compare now to TM? If it it’s a legit competitor ide like to know what portable to get? Thank you in advance for anyone answering this question!
Love your content! Maybe you can explain to us what you when you deal with a customer requesting you not to use their water .. Very common on the east coast lol thanks again for the awesome vids
Wow ! I never had a problem with that, I currently have a truckmount but I started with a potty. I just tell the customer I need a couple of buckets if water from your tub or sink and they just say ok. I received over 200 5 star reviews using my potty and telling them I need a couple buckets of water. I didn't ask them I told them I need water to do the job. I live in the Tidewater area of Virginia (east coast)
@@elvinhicks2320 they exist lol I've came across some customers like this once or twice. Especially if their outside water source is not working due to plumbing issues 🤷🏾♂️
Hi , I have been watching you 3 years, you are my motivation!! And finally i get my business license , i have ninja 500 psi no heater, i have one question for pls help me , what chemicals would you recommend me , not strong smell something neutral, ( pre spray for carpets, stain removal , and something for upholstery, ) thank you so much 🙏 peter from calgary
I use carpet details for tile, carpet, and upholstery. Its green-safe, has no odor, and cleans great. I'm happy I'm helping with motivation. Good luck!
@@greenrhinoproject thank you so much i went to LA last year I didn’t have a time but next time i will go to visit you and shake your hand for big motivation!
@@greenrhinoproject Before you buy Optimum Floorcare portable if you're interested let me know. In a few weeks I'll be selling real cheap my Mytee Vortex Lite with two 800 psi pumps, my Mytee LTD5-LX, two 1200 psi Mytee Water Hog pumps, two Mytee Air Hogs.
@@tomcase2837 oh ok, he doesn't respond to comments during good time, now that the portable is driving him crazy I doubt he'll respond to any comments. But, I probably wouldn't either now that he's getting all this exercise with the portable he's probably too tired. LOL!
A truckmount can put somebody out of business. What about after you get the truckmount within a week something else goes wrong with the truckmount that wasn't related to what was wrong with it a week ago, then you'll be waiting again on the truckmount doing the same thing you're doing right now. It looks painful to be honest.
Man seems for ever already w out ur tm! But yea definitely need to upgrade that porty! BUT you made some $$ either way...so...abit more struggle but definitely can make $$ w a porty...trust me I know
@@greenrhinoprojectMuch respect and thank you for sharing all your knowledge, insight, and tools of the trade with all of here. It’s a blessing that I’ve found your page to be honest. What do you charge for the pet stain cleanup job per room? I noticed the invoice was significantly larger than a standard cleaning.
Mitigation/Restoration guy here.
I have saved whole condo buildings with PORTABLE extraction.
We use dehu’s and air movers for the evaporation, but extraction first. Pulls >80% of the moisture out. Less time to dry, less risk of mold catastrophe.
I’m talking multiple floors, dozens of units affected after pipe ruptures. Tens of thousands of sqft soaked and ready to mold. Walls and ceilings caving in
@@stonwall9065 Absolutlet=y portables have there place. We work on appartment complexes and a truck mount would limit our mobility.
Good job man, yeah my mount went down 2 weeks ago permanently. Ended up in Sacramento, getting another one from Proline. We still have to meet up sometime.
Love proline. We only use a portable were Sacramento based.
Keep rocking it man I used a portable when I started as well
I have a Rotovac Monsoon with two 6.6 inch vacuum motors and it has plenty of power for cleaning carpets.
What about tile?
@@hittyman4023 unfortunately Rotovac only manufacturers them with a 500 psi or 220 psi pump, so you would have to use a water otter to run a spinner tool. However for me, because I own a janitorial and floorcare business; I have 6 six extractors plus 8 floor scrubbers and CRB' s so it's not an issue for me.
@@seanhiatt6736 man you dont need a tile spinner for tile, ive used spinners and ive used tile wands works the same just the spinner is faster
Is the rotovac good thinking about buying one
Are you still liking the monsoon? I'm really thinking of getting one.
Hi pal. Sorry to hear the tm is in the shop. Portables have came along way as you probably know and that portable could do with a vacuum upgrade to 2 x 6.6 lambs. It sounds like it has 2x 5.7 motors. When I have to use my portable it’s either on the van or at the door outside the home. It obviously saves the lifting. I know it’s only temporary but it will make a huge difference to the dry times and lugging around. Great video👍🏻
Did you put any chemicals with the water in the portable?
If youve got the dual 2 stage, its most likely around 95 cfm, these units usually made with vacs in series which limits the CFM, the newer rotovac monsoon or mytee breeze is closer to 225 cfm as they are in parallel
Just an anecdote from owning/operating LX, Rotovac, Mytee:
Actually one of the really unique things about LX Mytee Vacs, and Monsoon Rotovac motors is their Single stage motors and are in fact placed in Series not Parallel.
This vac arrangement for both Monsoon and Mytee is optimized for keeping the auto dump running smoothly/keeping up.
To have dry carpets (lift) and power at the wand the standard to aim is 12.5" mercury and 250cfm which can allow a functional 100' of 2" hose. Anything less than 100' then yes an old Speedster with Parallel HP 3stage is comparable. Every system has its place for bigger upholstery clean (50booths) I use Mytee breeze with air hog (150') and it's the perfect balance.
You are correct! I am incorrect about the series vs parallel, thanks@@runzization
@@runzization I have a ton of Mytee machines I don't hate them but I'll be selling of of them in a few weeks from now. I've been wanting to build my own ETM with 4 vacs and it's almost completed I'm just excited.
@@runzizationgreat information, thank you.
@@lovingeachothernow Can you make a video so we can see it? Thanks
Is it just pre spray or do you put detergent in the machine too
Is there a hose attachment for the portable that allows you to keep it outside or in the van? Or would a hose that long affect the suction? Thanks
Thanks for this video! I’m curious on the first job how many times you had to fill and dump the portable?
Twice
@@greenrhinoproject Right on, that’s not too bad.. I see a portable in my future, right now I’m just trying to get started with VLM and I’m struggling just to get my first couple jobs booked.. Boosting FB posts is not working and I’m about to try google ads.. Anyway, thanks for the videos and inspiration on TH-cam and TheCleanUp!
Yeah you need vacuum booster and filter and heat booster to makes it worth really.
Will the booster help in my case? I have a 1020 Tennant it runs 100psi lol. $4800 machine, will that increase psi? Mines a non heated
@@DiamondSt8lows you can buy a water otter to increase your water output and a Myee instant hot heater for heat.
Hey all. I appreciate all the content, as well as reading the comments for more information. My question is
Using a portable. Keeping it in the van or at the doorstep, upgraded with the
Vacuum booster
Filter
And heat booster
How does the portable compare now to TM?
If it it’s a legit competitor ide like to know what portable to get? Thank you in advance for anyone answering this question!
@@Stand4Good You can get a Rotovac CFX ZX powerful and has auto dump at a good price, compared to a 21k truckmount
Hey! I've been watching your videos for a while now and would love to learn the trade. I live here in OC and would love to come work for you!
Tommy what is your cocktail for removing pet stain and odor??
Hello sir. ❤😊 great video as always! ❤😊
You use a dry bonnet to dry the carpet?
@@raym5284 Yes you can help speed up dry times like that.
You want to look for water lift not CFM. CFM is essentially how long you can run your hoses, water lift is how much suction your machine will produce.
How much PSI is your portable? and which brand
He's using an Enduro
I’d like to know as well
How much did you charge for this job bro? And what city are you in? Thank you.
Love your content! Maybe you can explain to us what you when you deal with a customer requesting you not to use their water .. Very common on the east coast lol
thanks again for the awesome vids
I never had that issue myself. I would have to pass. Thanks for the comment!
Wow ! I never had a problem with that, I currently have a truckmount but I started with a potty. I just tell the customer I need a couple of buckets if water from your tub or sink and they just say ok. I received over 200 5 star reviews using my potty and telling them I need a couple buckets of water. I didn't ask them I told them I need water to do the job. I live in the Tidewater area of Virginia (east coast)
I meant "porty"
@@elvinhicks2320 they exist lol I've came across some customers like this once or twice. Especially if their outside water source is not working due to plumbing issues 🤷🏾♂️
Hi , I have been watching you 3 years, you are my motivation!! And finally i get my business license , i have ninja 500 psi no heater, i have one question for pls help me , what chemicals would you recommend me , not strong smell something neutral, ( pre spray for carpets, stain removal , and something for upholstery, ) thank you so much 🙏 peter from calgary
I use carpet details for tile, carpet, and upholstery. Its green-safe, has no odor, and cleans great. I'm happy I'm helping with motivation. Good luck!
@@greenrhinoproject thank you so much i went to LA last year I didn’t have a time but next time i will go to visit you and shake your hand for big motivation!
Build your own truckmount, it's easy. If you build it yourself you'll be able to repair yourself without dealing with the shop.
Can you build one for me?
why did you get rid of ur old boxxer did it just break?
It was no good anymore
Why aren't you using optimum floor's Extreme portable? Just curious.
I’ll be getting one this your for sure and just leave it in the van like a truckmount
@@greenrhinoproject look forward to the Overview!
@@greenrhinoproject Before you buy Optimum Floorcare portable if you're interested let me know. In a few weeks I'll be selling real cheap my Mytee Vortex Lite with two 800 psi pumps, my Mytee LTD5-LX, two 1200 psi Mytee Water Hog pumps, two Mytee Air Hogs.
@@runzizationme too! Thank you!
I'm still not convinced by truckmounts. For me, most jobs in UK can be best done using a good portable.
Hey Tommy I bet dropping back down to a portable is like trading a Cadillac for a Pinto. You still did a great job tho
What's wrong with your truck mount?
He said in the video it's in the shop for repair.
@@lovingeachothernow yep, I heard that. Was curious what the issue is
@@tomcase2837 oh ok, he doesn't respond to comments during good time, now that the portable is driving him crazy I doubt he'll respond to any comments. But, I probably wouldn't either now that he's getting all this exercise with the portable he's probably too tired. LOL!
Blown head gasket and cracked block. Defective on purchase but I did get a replacement for no cost because of the warrantee.
A truckmount can put somebody out of business. What about after you get the truckmount within a week something else goes wrong with the truckmount that wasn't related to what was wrong with it a week ago, then you'll be waiting again on the truckmount doing the same thing you're doing right now. It looks painful to be honest.
3 years portable only i agree
CHAT
chemical, Heat, agitation, time ❤
There's a bunch of noob mistakes in this video...
U should of showed how you took it out the truck lol
So, are there limitations on VLM? Because you are not cleaning with a rotating machine in the pet stains.
😍😍😍😍😍😍
Wana start a new business ,buy a portable 😅😅😅😅😅
Carpet Details says not to mix anything else into it.
Man seems for ever already w out ur tm! But yea definitely need to upgrade that porty! BUT you made some $$ either way...so...abit more struggle but definitely can make $$ w a porty...trust me I know
Huh
@@JamesJohnson-oc4re?
You should have kept your boxer TM.
I'm guessing it took a little longer than your 4 hour limit? 😉
Actually at the end of the video I broke down time and earnings. It took 4 hours $1040. By myself it would have easily took me 5 hours I think.
Nah it took 13 minutes and 3 seconds, can't you see lol?
@@greenrhinoprojectMuch respect and thank you for sharing all your knowledge, insight, and tools of the trade with all of here. It’s a blessing that I’ve found your page to be honest.
What do you charge for the pet stain cleanup job per room? I noticed the invoice was significantly larger than a standard cleaning.