i just bought an is 300 at 16 im saving up for a turbo, exhaust, swaybars, tyres and wheels, and a sequential transmission with straight cut gears cus that whine is just perfect 🤩
I also had pre order have fought it managed to take the shim out and just shimmed the rear of the shifter with a 1mm shim fixed the issue i could hit all the gears fought with reverse new cam with stock shim all the gears felt good no reverse im done good luck nice install
Archie im having issues with my install also. S1 sent me a different updated cam for the shifter and I tried different things they suggested but I still cant get it to work propely. Did you get yours working or do you still not have reverse?
@@SherryBombImports no i installed the new cam had all forward gears no reverse i hit them up on messenger and nothing so now i have a 2k paper weight... im done with it going powerglide
Great video! Very detail, video editing is perfect. Camera is focus just right, no shaking or unwanted abrupt movements. Thank you for sharing the knowledge.
Did you have to do any type of adjustment? I’ve heard a few stories with the CD009 installs with incorrect gear selection and some type of adjustments needed to be made…nice work, bad ass car!
I don't like to be the sore guy in the comments but I was also one of the first few to receive a s1 for a CD trans and it did not work for me. Sometimes it would shift into 3rd instead of 1st and 5th instead of 3rd. What a nightmare. I really loved the concept but man it sucked. I even adjusted it fully towards the driver's side and it would not shift correctly after putting power down. I then started getting a 5th instead of 3rd after tryna shift from 2nd to 3rd on boost.... I'll be selling mine for sure. Great install video! It's perfect. But if you look at the instructions now, they changed it. Now they want you to remove the plunger... what a joke.
I’ve been in contact with them as well for this issue as I was having it happen intermittently this past weekend. They have addressed the issues and will be sending me out a part end of this week early next week. That they said was an easy install. So if you want you can reach out to them I usually do on Instagram and let them know you’re also having the issue. While it is annoying this is the first edition of the part and sometimes parts need to be updated and things need to be changed. Just wish they were the ones to find the issues before sending out.
@@KBNZUS thanks, I pulled it already. I'm gonna sell it. I wish they were that clear with me. I emailed them and they told me to adjust it. After I got back to them that it still didn't work, they stopped emailing me back... I wonder what part they changing to fix it... Maybe a thinner shim?
@@KBNZUS I tried the updated installation instructions with removing the centering plunger all together, I tried changing the shim size of the main shim plate, AND I also tried the new "updated cam" that did absolutely nothing. I'm really irritated. I just want my money back.
@@BoostedLexus Mine is doing the exact same thing! I asked them to return it but they seem very reluctant! Maybe if we all get together we can get our money back. I spent $2000 on something that doesn't even work right. I put my SerialNine short shifter back in, problem solved.
I'm currently planning on installing a CD009 on my Toyota Soarer 1JZ (almost same fit as a supra) you think this might fit in it? How can I investigate the fit?
Hello! Do you have a shop? If you don’t mind me asking. I need help on mine and my sons project car, it’s an 01 IS300 auto trans and I wanna convert it to manual but I come across your channel maybe you’d give me a bit of your time, thanks in advance!
@@KBNZUS hey budd! Thank for the response. I’m in Concord Ca. Just had to ask cause it seems that you really do great job and really know what you doing.
@@KBNZUS last question what clutch do you recommend, seeing the brand new one will probably not come with one. Budget not to cheep not to expensive the car is going to be my Sunday driver casual cruiser. 400-415hp
Yes you have to use the clutch for shifting every gear. But don’t waste your time, this shifter is not good. I have taken it out and put in a serial nine shifter
@@KBNZUS was reading through the comments because while watching the video i had serious doubts this would work reliably if at all. The concept is cool the execution just doesnt seem very well done. Then i found this comment confirming my beliefs
@@_xvvvier_ I have removed the shifter as I had a lot of issues with it. I have a serial nine shifter now. On paper this thing seems really cool but it caused me nothing but headaches
@@KBNZUS trying to gather all info i can get cause i want the s1 sequential for sure, 2jz gte with sincro rev match transmission from 370Z but i can’t find any info if someone ever did that swap 2jz with the transmission sincro rev match from Z building it for my frs,
Just so you know I have since removed this shifter because of so many issues and switched to a serial nine one. Not sure if you have seen my other videos of it
I had the same exact problem. Had a 03 CD holes were different, swapped tail shaft to make it work. I ended up buying a new cd00a too! Just came in last week!
@@KBNZUS haha I’m sure because they were very confused when I told them the main holes didn’t line up haha. That awesome they came out with the “universal” plate!
Great tutorial Brent! This is so needed to help prevent a money shift.
Thank you Jamie means a lot!
i just bought an is 300 at 16 im saving up for a turbo, exhaust, swaybars, tyres and wheels, and a sequential transmission with straight cut gears cus that whine is just perfect 🤩
Really Nicely produced Instructional Vid ! 👍🏼🤓
I just put an IRP shifter into my G35 and was super on the fence about the S1. This is definitely on my down the road upgrade list now.
installing this now. THANK YOU !!! I found the instructions vague at the washer install. Well done!
I also had pre order have fought it managed to take the shim out and just shimmed the rear of the shifter with a 1mm shim fixed the issue i could hit all the gears fought with reverse new cam with stock shim all the gears felt good no reverse im done good luck nice install
Archie im having issues with my install also. S1 sent me a different updated cam for the shifter and I tried different things they suggested but I still cant get it to work propely. Did you get yours working or do you still not have reverse?
@@SherryBombImports no i installed the new cam had all forward gears no reverse i hit them up on messenger and nothing so now i have a 2k paper weight... im done with it going powerglide
Badass part. Thank you for the video. We are all technical people so in that sense the title is misleading.
Great video! Very detail, video editing is perfect. Camera is focus just right, no shaking or unwanted abrupt movements. Thank you for sharing the knowledge.
Thank you, these comments are really appreciated
Perfect bro I hunted for months to find a video of someone's that's done it. got myn set up but heaps of muking around
Solid vid. Good luck with your drifting.
Hello! I was wondering if I can swap a CD009 transmission in my automatic 350z ?!? Thanks in advance. Great video by the way!!!
Yes you can!
My Mom needs this...
Sequential gearboxes can be made helical you don't get whine
Did you have to do any type of adjustment? I’ve heard a few stories with the CD009 installs with incorrect gear selection and some type of adjustments needed to be made…nice work, bad ass car!
This is pretty cool setup, debating this setup or t56 for my rhd supra!
Awesome tutorial bro! Always loved all your ISs. Keep up awesome content!
Dude awesome! Hoping they come out with something for the WRX or even the STi...
Sweet. Can't wait 😌😊💪
This video helped me install my serial nine shifter because the s1 sequential is garbage
I don't like to be the sore guy in the comments but I was also one of the first few to receive a s1 for a CD trans and it did not work for me. Sometimes it would shift into 3rd instead of 1st and 5th instead of 3rd. What a nightmare. I really loved the concept but man it sucked. I even adjusted it fully towards the driver's side and it would not shift correctly after putting power down. I then started getting a 5th instead of 3rd after tryna shift from 2nd to 3rd on boost.... I'll be selling mine for sure. Great install video! It's perfect. But if you look at the instructions now, they changed it. Now they want you to remove the plunger... what a joke.
I’ve been in contact with them as well for this issue as I was having it happen intermittently this past weekend. They have addressed the issues and will be sending me out a part end of this week early next week. That they said was an easy install. So if you want you can reach out to them I usually do on Instagram and let them know you’re also having the issue. While it is annoying this is the first edition of the part and sometimes parts need to be updated and things need to be changed. Just wish they were the ones to find the issues before sending out.
@@KBNZUS thanks, I pulled it already. I'm gonna sell it. I wish they were that clear with me. I emailed them and they told me to adjust it. After I got back to them that it still didn't work, they stopped emailing me back... I wonder what part they changing to fix it... Maybe a thinner shim?
I’ll keep you posted probably post a video on the fix
@@KBNZUS I tried the updated installation instructions with removing the centering plunger all together, I tried changing the shim size of the main shim plate, AND I also tried the new "updated cam" that did absolutely nothing. I'm really irritated. I just want my money back.
@@BoostedLexus Mine is doing the exact same thing! I asked them to return it but they seem very reluctant! Maybe if we all get together we can get our money back. I spent $2000 on something that doesn't even work right. I put my SerialNine short shifter back in, problem solved.
thanks for sharing your knowledge boss
The 370z has the same transmission right?
Hi enjoy your video I'm just dreaming over here but I have a C5 ZO6 would that work or or is there anything like that shifter for that
quick question. does they make for sti too ?
I don't think so
Great video thks
I’m probably going s1 in my s13 street car because Mexico things
him: this shifter is good for drift
me: but I wanna daily drive with a sequential...😳
I'm currently planning on installing a CD009 on my Toyota Soarer 1JZ (almost same fit as a supra) you think this might fit in it? How can I investigate the fit?
did u have to use the clutch just on take off and noe for the other gears?
Have to use the clutch for all gears
Also could you please point out which option S1 is this one from the website?
I plan on doing this setup on my Z but it looks like it sits forward more than factory?
This was for the shorter setup, they sell a long one too
My question s1 sequintial convertion is fit for any kind of car transmission?
only the transmissions they make it for
Do you have to use clutch when shifting gears?
Yes
Aye I’m the 900th sub
Thanks!!!
Can this be installed with the transmission in the car? It is in an S13. Thanks
Never mind, you answered that question at 15 minutes. :)
How does the Cd09 fight in a s13 tunnel?
So cool
Do you still need to use the clutch?
Yes
Hello! Do you have a shop? If you don’t mind me asking. I need help on mine and my sons project car, it’s an 01 IS300 auto trans and I wanna convert it to manual but I come across your channel maybe you’d give me a bit of your time, thanks in advance!
I usually do this for myself as I have a full time job. But can offer advice if needed. What is your location?
@@KBNZUS hey budd! Thank for the response. I’m in Concord Ca. Just had to ask cause it seems that you really do great job and really know what you doing.
Hey man. im about to buy a CD00A. its going up against a 5.3 ls swap in my 78 firebird. do you think this is a good choice in transmission?
I would say the CD trans and the t56 are your best options
@@KBNZUS last question what clutch do you recommend, seeing the brand new one will probably not come with one. Budget not to cheep not to expensive the car is going to be my Sunday driver casual cruiser. 400-415hp
Quick question what do you mean you still have to use the clutch to shift, just from neutral to 1st or from shifting from different gears
Yes you have to use the clutch for shifting every gear. But don’t waste your time, this shifter is not good. I have taken it out and put in a serial nine shifter
@@KBNZUS bruh are you serious 🙃 I just bought it
@@valhlei 🙃 I wish you better luck then me. I’ve made other videos about it not working
@@KBNZUS was reading through the comments because while watching the video i had serious doubts this would work reliably if at all. The concept is cool the execution just doesnt seem very well done. Then i found this comment confirming my beliefs
Nice I want how to by one please
Hello good morning friend do you rebuild transmission
I have Toyota Supra 1989 5 speed
I do not sorry!
Do u have a video on how to program it?
I do not worry but they have instructions on the site, it’s pretty easy
@@KBNZUS so do u think it worth it ? Or just get a short shifter
@@_xvvvier_ I have removed the shifter as I had a lot of issues with it. I have a serial nine shifter now. On paper this thing seems really cool but it caused me nothing but headaches
does it work with the 370z rev match transmission?? or just the regular cd009?
I’m pretty sure they make a different bracket for the JK trans as well
@@KBNZUS trying to gather all info i can get
cause i want the s1 sequential for sure,
2jz gte with sincro rev match transmission from 370Z but i can’t find any info
if someone ever did that swap
2jz with the transmission sincro rev match from Z
building it for my frs,
Just so you know I have since removed this shifter because of so many issues and switched to a serial nine one. Not sure if you have seen my other videos of it
@@KBNZUS man i just watch it right now that’s sad,
can’t wait for the review on the, serial nine
I had the same exact problem. Had a 03 CD holes were different, swapped tail shaft to make it work. I ended up buying a new cd00a too! Just came in last week!
That’s awesome! I think we were the only ones who tried it on the early transmission
@@KBNZUS haha I’m sure because they were very confused when I told them the main holes didn’t line up haha. That awesome they came out with the “universal” plate!
@@tylerzenki1436 follow me on Instagram @KBNZ.US so I can follow back. Would love to see your project
@@KBNZUS I did! I dm’d you!
I want do this swap so bad
Don’t do it tho, watch my other videos. I got rid of it
I like to buy transmission please
your title is false. installing a sequential shifter doesnt not make it a sequential transmission. there is a massive difference.
I’m sorry my title upsets you
What's the cost of it
$1800
But you should check out my other videos testing it. Things haven’t gone too well
Ok I will check them out
Up
don't bother, this shifter sucks. he removes it a few videos later.