KW T-680 ABS, TC & ESP issue & Problem :(
ฝัง
- เผยแพร่เมื่อ 16 พ.ย. 2024
- 2019 KW T-680
ABS, TC & ESP issue or Problems :(
I I had after a 1-2 month 40-70k miles same problem in MN-ND. sow I got to a dealership and they said it’s from senior:(
And now 460k came back on I did like 3-4 hey cycles with a key the system turned off and after 0:05 min came back on all the lights ABS, TC & ESP again :(
We have a fleet of these with about the same mileage. The same lights come on mostly during wet conditions. There is a problem/ break somewhere in the wire harness and would be nearly impossible to pinpoint. We are slowly replacing the harnesses one by one. It’s the only real way to solve this issue.
Which exactly hornets was replaced?
They didn’t have one and was during Covid back order so they just did something without changing :((
It's usually near the diver axle the connector for ABS pins get lose so when you go on a bump it throw the fault for ATC TRANSMISSION ABS
Which driver axle are you referring to? Are you talking about under the hood near the driver side or one of the drive axles on the rear@@TARANS012
@donnywheeler6420 near drive axle for drive and on the frame near steer tire for steer.
If you dotn find issue in wiring check ABS tone ring on affected axle
A few years ago kenworth/peterbilt issued a recall about the abs light not coming on. After the update I've consistently have abs/wheel speed sensors problems. This could be all our problems
My Kenworth is doing the same thing. When I cycled mine it shut off but then when I headed back on the road it turns back on.
Does anyone know how to intentionally trigger these sensors? When they're on, it's the only time my truck won't idle shutdown (and I've tried all the other ways).
Same issue, I have the Transmission Fault along with traction control and Hill assist light on. They told me to replace the ABS module
I have same issue. Did that work for you?
Did it work
bro what was the problem i am havin same issue
What was the problem ? because I’m having the same issue
@@guadalupecantu7292 Suddenly everything just went away by itself. Hasn't came back ever since. ..weird
Thanks now I don't have to get scammed by Kenworth dealers.
Thanks alot this actually fixed my truck it took off all the lights 👍👍👌👌👏👏
The fixing is just temporary, mine came back on when is kind of cold like on 30's
Hey guys….turn da power switch off by the seat….leave it off with the key out the ignition for about 25-30 mins….some times it take more den 5 to 10 mins for it to reset the lights …..thank me later
TruckRepair shop in NJ figured out this problem for me. Lights Never came back again
What was the solution
Как они решили проблему¿ был у них, приговорили на 3к$ Сказали менять жгут абс
What was the problem?
Which shop in NJ ? Thank you
This also happens on a 2025 kenworth. Your procedure worked to clear the TC light.
I have issues with ABS sensor. I replace them some of twice and ABS wire harness.
Can anybody say which abs wire was it? Or which wheel speed sensor? I still have the same issue.
you figure this stuff out, I have this and adaptive cruise control fault coming on. inspect radar.
I appreciate homie, you're a life saver.
My 2023 Kenworth T680 shows these same exact lights! And my adaptive cruise control stops working only when I drive in Nebraska, and Kansas. Idk how to fix it! Help!!
Same thing with me! Did you got it fixed npw ?
@@HarpreetSingh-zd6wd I quit the company before it was fixed. What my diesel mechanic told me was that kenworth didn’t have the “software” to be able to fix it which I don’t know what the fuck did that even mean lol.
Its not the company dude, every vehicle is designed that way. Its probably a short in the electrical. If you get into an accident, trust me, it wont have anything to do with your abs light being on. Its on because its telling you its not operational.
ATS continuous light ON..doesn't work for me
@@mitsu_lancer can be one off the ABS sensor glitches or bad one ☝️ if you have money replace all if the truck is new just the bad one ☝️ I had the same issue in winter Ion ice 🧊 couple times :(
@@mitsu_lancer or wire harness can be bad I had the same issues,wire harness
Mine doesn’t it anytime I wash it or it rains
Replace abs wire harnesses...... I had 8 spots rubbed through same issue only did it when it rained
Which abs wire? There are so many of them
Peterbilt/ Kenworth = Paccar. They are the same company.
If coming back you need to replace the brake pressure sensor 1
Hello
How are you man i hope you had a great day and your truck gets fixed❤️❤️
i did this twice , it didn’t work, but i have a 24’ T680.
Were you able to resolve issue?
I’m a company driver but I’m about to try this just to save a trip to the shop. Let you know if it works
What happened?
?
My it’s coming up today and it did it at 67 miles and wants to stops the truck , I stopped and did this and all when off , but later abs warning message comes on ,
Do you still have the problem?
check plug wires on abs module by front left drive abs sensor plug
check you abs wheel sensors push in and they reset the gap themselves
There’s was ABS harness
Hey man did you manage to fix it ?
Yeah, the wire harness was bad and ABS sensor :(
Can you say exactly where it was bad? I have the same issue and can’t find it. Thanks
@@hasibmohmand2609 that’s what they told me wire harness, I don’t have clue earth:(
@@mgp-bct7723 if you have the invoice, maybe you can see the part number.
Hey if its paccar its sometimes the transmission and you will need a new one
That’s what they replaced 1st time hall computer with gear changes , 2nd time whole transmission new, 3rd time computer and the clutch because the computer damage my clutch :(( + engine rebuild :( + wire, harness, lotta problems :(
@@mgp-bct7723all thatvstuff seems like recall items and should be replaced for free but now mine has a brake issue when I press the brake the brakes keep pumping crazy idk but I have the bendix system and that started after I raised the governor that started happening idk have you ever had that issue or when you brake hard the trailer locks up
Yes I know
Damn bro thanks it worked 🙏
How long did the lights stay off?
Wire harness was the problem 2 times ABS sensor and wire harnes
In till I drove in rain 🌧️
@@mgp-bct7723 just what i figured. Thanks
@@mgp-bct7723 can you say which abs sensor please?
@@hasibmohmand2609did you ever figure out what abs sensor it was ?
Check battery wires first
Thanks
"All de Kenworth electronic no good" does a reset.."everyting all good" 😂
1.3 million miles on my T680, no wiring issues. Guess I got lucky
I heard the newer one have even more problems electronic every day Kenworth replacing dashboards
@@mgp-bct7723 there isn't a manufacturer in this world that doesn't have any issues. Problem with electronics is they all come from China, and you know the quality control isn't the best
I tried the trick but all the lights are still on
What did u do to fix this
Sometimes went out sometimes come back on only when start snowing 🌨
It’s was the wire harness or beside a harness
@@mgp-bct7723 which harness any idea
do you know which harness they change
My truck started doing the same thing ABS live traction control in control and the car with wiggly lines
@@xraybravo7180 did this fix your issue
Kenworth have issues all the time .
@@FarhanSalad-u4p yap 100% 💯 agreed 👍🏻 people need to stay way:(
Customer sucks parts most expensive labor most expensive quality worthless product
Same problem
:(((
Hello,
👍🇲🇨🇲🇨🇲🇨