I could be wrong, but when you were looking at the SWR on 10 meters, your mode was USB. The reading you were seeing were the audio no SWR. Don't you need to put the mode to AM in order to see the SWR on the FT-991A? I'm new at this and just got my FT-991A but that is what I have seen others do.
The SWR will be read when you TX in any mode as long as you have the meter set to swr.. If you select the meter to any other like power, alc etc then it will show those items. But only when you TX.. If you're only receiving it will be the S Meter signal only
I'm running a MFJ-1982M End Fed that does a pretty good job. In my HOA configuration (inverted V with a 90 degree turn end/end) it's almost perfectly resonant across 40M and has wide bandwidth/low SWR available on all other bands...except a favorite, 10M. My DX10 can tune all of 10M "except" the part of the band above 29.2. I know, I should be happy (I am) but I sure would like to be able to grab that upper portion of 10M. Is it worth $199? Maybe. Thanks for making this video.
Depends on your needs really.. I use the external exclusively if I need to tune just cause it is so much faster than the internal tuner. I mean like 2 seconds and poof where the internal will go for what seems like forever... The only real reason I keep it though is cause I have nothing to tune 60m where some friends hang out... All my antennas are resonant now on most bands with exception of 17/and 12m and rarely ever use my efhw anymore. But I still keep the external tuner for 10m on my 40m delta loop cause it's about a 2:1..I didn't pay that much for mine. Bought it off a friend for much less. Maybe you could search around and find a deal
La potencia del FT-991 se veía a 5 o 9W….. mientras la del otro radio estaba a 99W…. Por lo tanto, la respuesta de SWR, será siempre favorable a menor RF power…
I am looking at buying the MFJ-939. Which version did you go with for the FT-DX10 or better yet, which cable between rig and tuner. You have a nice clean setup! Thanks and 73!
The cable is the mfj- 5114y ..the tuner mfj 939....or you can buy the mfj939y and not have to charge the jumpers inside to with with it..and may even come with the cable depending on where you buy it
I just bought the MFJ 939 for my FTDX-10. I have the 5114Y cable. I am confused on how the DIP switches need to be set. Using the cable, do the switches need to be changed at all? Thanks for the video!
I can look. But I'm pretty sure with thy dx10 the jumper 4 didn't matter.. And jumper 2 is on Y.. When you open it up you will see the jumper 2 towards the rear it will be a row of quite a few side by side and jumper 4 that's the grunt on the left side i think... You can't really mess it up. It will just not work if not on the right jumpers.. But jmp 2 is on Y
@@kc3ppb of its the 939 y it should be pre-configured already.. Plug it in and try it.. One thing I did though that seemed to help was set the radio setting for external tuner then turn it off. Then plug in the tuner to the rear and push the red power button in . Then turn the radio back on.. You will hear the tuner click on power up letting you know the radio has found it and they are talking to one another
A little of both...it's a mfj 1982 hp ...but the wire I upgraded to 12awg instead of the 16awg that comes on it...it got stretched pretty bad in a heavy snow so I replaced the wire
It's in a inverted v configuration at about 33 to 35ft in center. But not just across a tree. I have a rope in between two trees with the wire going through it so that the antenna is clear and away from the trees. So it's out in the open.. No counter poise or ground on the unun itself. But the coax is grounded on a ground rod at a barrel connector just before entering the shack
@@AK4PJ I have the MFJ1984 10-40 and no luck with it. It's 10ft to about 20 ft off the ground on the high end in a sloper. People say that the transformer box should be close to the ground, which I have mind about 10ft up. I do not have counterpoise or ground either. Thanks for getting back to me...
@@thomashenderson603 my best results have been with the transformer higher of the ground. It's about 12ft right now. The middle of the wire is about 33ft or so and the end of the wire is about 8ft off the ground... My transformer is about 50ft away from the house with the antenna going even father away. I found with it close to the house I had more noise from the house. Getting it away from the house made the biggest difference on noise.. Getting the whole thing higher off the ground made it a whole lot less picky on tuning 10m....I've had mine in about 10 different configurations and inverted v away from trees made all the difference.. Swr is all dependent on its height and configuration. So it will change depending on any of those. Just have to play with it to see what gets your best results
Nothing wrong with using a tuner to make your radio happy especially the internal which will only tune a 3.1 or under ..where it becomes not so good is when people use a really bad matched antenna with lots of power especially using amplifiers..all my antennas are resonant antennas with the exception of my efhw...but the tuner does nothing for a bad matched antenna other than making the radio think it's matched so you're still getting a lot of heat at the antenna ...best to have a resonant antenna
I have bought the MFJ 929 to use it with my FT991 A, but it doesn't seem to work, since the SWR stays at 1,5 and all other values are at 0... After watching this video at th-cam.com/video/6V1kBVGK3E8/w-d-xo.html&ab_channel=BarryKery, I still couldn't resolve the issue...
Not sure of that model but should be the sane I would think.. I assume you have the interface cable.. Is the mfj tuner a yaesu version? I know on mine there are jumpers inside the tuner that have to be placed on the right jumper pins. May check that and make sure it's configured correctly for yaesu and a icom or something else... Those enquire you to take the housing off the tuner on my model
@@bunnieslover3181 I could be wrong but if it's not interacting at all with the radio I feel like the jumpers may be wrong.. The manual shows you pretty good how they should be configured
Thanks for covering the tuner details with both Radios. 👏👏
Thanks for video .I think the ant ,feed lines and the radials are all part of the antenna,
Good vid, if you are a new ham listen to this guy, he knows what he is talking about.
videos like this are real helpful!!
I could be wrong, but when you were looking at the SWR on 10 meters, your mode was USB. The reading you were seeing were the audio no SWR. Don't you need to put the mode to AM in order to see the SWR on the FT-991A? I'm new at this and just got my FT-991A but that is what I have seen others do.
The SWR will be read when you TX in any mode as long as you have the meter set to swr.. If you select the meter to any other like power, alc etc then it will show those items. But only when you TX.. If you're only receiving it will be the S Meter signal only
I'm running a MFJ-1982M End Fed that does a pretty good job. In my HOA configuration (inverted V with a 90 degree turn end/end) it's almost perfectly resonant across 40M and has wide bandwidth/low SWR available on all other bands...except a favorite, 10M. My DX10 can tune all of 10M "except" the part of the band above 29.2. I know, I should be happy (I am) but I sure would like to be able to grab that upper portion of 10M. Is it worth $199? Maybe. Thanks for making this video.
Depends on your needs really.. I use the external exclusively if I need to tune just cause it is so much faster than the internal tuner. I mean like 2 seconds and poof where the internal will go for what seems like forever... The only real reason I keep it though is cause I have nothing to tune 60m where some friends hang out... All my antennas are resonant now on most bands with exception of 17/and 12m and rarely ever use my efhw anymore. But I still keep the external tuner for 10m on my 40m delta loop cause it's about a 2:1..I didn't pay that much for mine. Bought it off a friend for much less. Maybe you could search around and find a deal
La potencia del FT-991 se veía a 5 o 9W….. mientras la del otro radio estaba a 99W…. Por lo tanto, la respuesta de SWR, será siempre favorable a menor RF power…
The radio is part of the antenna ,and tuner if used
I am looking at buying the MFJ-939. Which version did you go with for the FT-DX10 or better yet, which cable between rig and tuner. You have a nice clean setup! Thanks and 73!
The cable is the mfj- 5114y ..the tuner mfj 939....or you can buy the mfj939y and not have to charge the jumpers inside to with with it..and may even come with the cable depending on where you buy it
@@AK4PJ Thank You very much for the information!! I am ordering now!! Can't wait to get back on to HF!!!
73,
Adam KB8VOM
I just bought the MFJ 939 for my FTDX-10. I have the 5114Y cable. I am confused on how the DIP switches need to be set. Using the cable, do the switches need to be changed at all? Thanks for the video!
What model 939 did you buy? They are all basically the same but some come with the jumpers already configured for certain brands..
I can look. But I'm pretty sure with thy dx10 the jumper 4 didn't matter.. And jumper 2 is on Y.. When you open it up you will see the jumper 2 towards the rear it will be a row of quite a few side by side and jumper 4 that's the grunt on the left side i think... You can't really mess it up. It will just not work if not on the right jumpers.. But jmp 2 is on Y
@@AK4PJ The 939Y, I think, it already had the 5114Y cable in the box.
@@AK4PJ Thank you for the quick reply also!
@@kc3ppb of its the 939 y it should be pre-configured already.. Plug it in and try it.. One thing I did though that seemed to help was set the radio setting for external tuner then turn it off. Then plug in the tuner to the rear and push the red power button in . Then turn the radio back on.. You will hear the tuner click on power up letting you know the radio has found it and they are talking to one another
on the 60-meter hanban I had to use external tuner because my SWR 5 \
73
I have to on 60 as well.. The EFHW isn't really designed to include that band.. But work external tuner or works
Can I ask which EFHW Antenna you use? Is it home built or commercially made? Thanks.
A little of both...it's a mfj 1982 hp ...but the wire I upgraded to 12awg instead of the 16awg that comes on it...it got stretched pretty bad in a heavy snow so I replaced the wire
Thx
how high do you have your mfj1982 and do you ground it?
It's in a inverted v configuration at about 33 to 35ft in center. But not just across a tree. I have a rope in between two trees with the wire going through it so that the antenna is clear and away from the trees. So it's out in the open.. No counter poise or ground on the unun itself. But the coax is grounded on a ground rod at a barrel connector just before entering the shack
@@AK4PJ I have the MFJ1984 10-40 and no luck with it. It's 10ft to about 20 ft off the ground on the high end in a sloper. People say that the transformer box should be close to the ground, which I have mind about 10ft up. I do not have counterpoise or ground either. Thanks for getting back to me...
@@thomashenderson603 my best results have been with the transformer higher of the ground. It's about 12ft right now. The middle of the wire is about 33ft or so and the end of the wire is about 8ft off the ground... My transformer is about 50ft away from the house with the antenna going even father away. I found with it close to the house I had more noise from the house. Getting it away from the house made the biggest difference on noise.. Getting the whole thing higher off the ground made it a whole lot less picky on tuning 10m....I've had mine in about 10 different configurations and inverted v away from trees made all the difference.. Swr is all dependent on its height and configuration. So it will change depending on any of those. Just have to play with it to see what gets your best results
@@thomashenderson603 I followed "my antennas" efhw instructions and got it working the best from their recommendations on a efhw
@@AK4PJ thank you, I going to try a inverted v. Away from the house.
Mfj is fast after the tune is programmed, something Yeasu radios do not.
Put up a way for people to by you a coffee...
i would never use tuner in radio after long discussion with my ham radio repair guy !!! not a good idea to use them !!!
Nothing wrong with using a tuner to make your radio happy especially the internal which will only tune a 3.1 or under ..where it becomes not so good is when people use a really bad matched antenna with lots of power especially using amplifiers..all my antennas are resonant antennas with the exception of my efhw...but the tuner does nothing for a bad matched antenna other than making the radio think it's matched so you're still getting a lot of heat at the antenna ...best to have a resonant antenna
I have bought the MFJ 929 to use it with my FT991 A, but it doesn't seem to work, since the SWR stays at 1,5 and all other values are at 0... After watching this video at th-cam.com/video/6V1kBVGK3E8/w-d-xo.html&ab_channel=BarryKery, I still couldn't resolve the issue...
Not sure of that model but should be the sane I would think.. I assume you have the interface cable.. Is the mfj tuner a yaesu version? I know on mine there are jumpers inside the tuner that have to be placed on the right jumper pins. May check that and make sure it's configured correctly for yaesu and a icom or something else... Those enquire you to take the housing off the tuner on my model
@@AK4PJ I have the rightinterface cable, but I haven't looked inside the housing.
@@bunnieslover3181 I could be wrong but if it's not interacting at all with the radio I feel like the jumpers may be wrong.. The manual shows you pretty good how they should be configured
@@AK4PJ Yes, but in the manuels, the FT 991 isn't listed... It is the issue. I do not know how to set up the jumper.
@@bunnieslover3181 when I did move it wasn't either.. I followed the one with the ft-891 models and it worked