Tips For Your Aluminum Welding Project
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Get out your pen and paper because this video has a ton of information. A customer came to our "Come Weld With Us" event and brought this piece that they were having trouble welding. Peter troubleshooted the work piece with the customer and they evaluated the best way to weld it.
usaweld.com
I bought the HTP220 MTS probably 4-5 months ago, this machine is the biz! If I could afford the higher end machine, Id have it in a heartbeat as it has all the control one could imagine, far more than the 220 has, it would be nice if the software and extra control would work on the 220. That being said, I spent 10-15 mins on the phone with Peter, shared a few photos of my welds and he had me dialed in immediately. Thanks again Peter. I might add that Peter returned my call way late in the day Pacific time, I don't know of any other manufacturer that would even dream of giving you a call next day, never mind immediately and so late in the evening. It must have been close to 8.30-9.00 pm when Peter called me and had me set up. I have been TIG and MIG welding for a little less than 2 years and find this machine very intuitive. Thanks HTP, Jeff, Peter and the team.
i had the same problem Petr give good advice , thanks
Hey Peter 👋. What is mynest voltage in mig welding? For example 235 ipm and -5 voltage?
My nest? Voltage
Please give me double pulse settings for 4043 1/8" and 3/16" so I can get in the ball park
what diameter wire are you using?
Here are some additional videos that may help: th-cam.com/users/results?search_query=pro+pulse+220+double+pulse
Providing settings really is based on so many factors it is difficult to do, you can give us a call and we can help you get it set up correctly 847-357-0700
@@zod-engineering-welding .035
@@raymondcorreira847 this will,not be *the* fix, but a part of the solution most likely. Dial in your thickness setting. Look at the amperage value in the corner. Increase the WFS until your amps show 20% higher than what they just did. Then dial back the voltage about 2.5V. This is just a start, remember that. You have to set the start speed and start time as well. Please post up those settings.
@@zod-engineering-welding thanks ill try tommorrow