Toyota Yaris MMT Multi-Mode GearBox Actuator and Clutch initialization Learning Code DTC P0810
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Call me, message me, i can help:
WhatsApp or Viber +375 29 6353511 Yuri
I can help you online.
Toyota Corolla, Auris, Yaris, Verso, Aygo, Peugeot 107, Citroen C1, Suzuki Swift
Refurbished Parts with Warranty 30000km
Clutch Actuators for all models
Full Support
Звоните, пишите, я могу помочь:
WhatsApp или Viber +375 29 6353511 Юрий
Я могу помочь вам онлайн.
Тойота Королла, Аурис, Ярис, Версо, Айго, Пежо 107, Ситроен С1, Сузуки Свифт
Toyota Corolla, Auris, Yaris, Verso, Aygo, Peugeot 107, Citroen C1, Suzuki Swift
Восстановленные детали с гарантией 30 000 км.
Актуаторы сцепления для всех моделей, блоки управления и другие запчасти.
Полная поддержка.
התקשר אליי, שלח לי הודעה, אני יכול לעזור:
WhatsApp או Viber +375 29 6353511 Yury
אני יכול לעזור לך באינטרנט.
טויוטה קורולה, אוריס, יאריס, ורסו, איגו, פיג'ו 107, סיטרואן C1, סוזוקי סוויפט
חלקים מחודשים עם אחריות 30000 ק"מ
מפעילי מצמד לכל הדגמים
תמיכה מלאה
Toyota Auris
Toyota Corolla Verso
Toyota Corolla
Toyota Yaris
Aygo
Peugeot 107
Citroen C1
VERSO S
DAIHATSU SHARADE
SUZUKI SWIFT
SUBARU TREZIA
Тойота Аурис
Тойота Королла Версо
Тойота Королла
Тойота Ярис
Айго
Пежо 107
Ситроен С1
ВЕРСО С
ДАЙХАТСУ ШАРАДЭ
СУЗУКИ СВИФТ
СУБАРУ ТРЕЗИЯ
טויוטה אוריס
טויוטה קורולה ורסו
טויוטה קורולה
טויוטה יאריס
איגו
פיג'ו 107
סיטרואן C1
VERSO S
DAIHATSU SHARADE
סוזוקי סוויפט
סובארו טרזיה
This guy is a legend doesn’t beat around the bush, gets straight to the point.
Thanks.
Thank You
I have put what you said in written format
put in neutral
switch off everything
put the short circuit from link 4 to link 13
wait 10 seconds
turn on switch (everything should flash)
pump bake pedal 7 times and hold
put gear into E
than take to manual
switch to -M x4 times
Back to E
back to N
let go of Brake pedal and than press back down again
pump the brake 3 times and hold
turn off switch
wait 10 seconds
disconnect the wire
turn on switch
turn off switch
wait 10 seconds
use brake pedal or use N
wait for neutral to stop flashing
turn on switch
turn ignition and wait until N stops Flashing
now ready to go
Wow!
Cool!
Thank you
Can dis format work on auris?
Top tip. My new toyota was driving really bad. Now is as new.
Great!
If you don't have an ODB2 connector then simply run a short wire between the 4th and the 13th terminal of the ODB2 connector (jumper it). Do this before you turn on the ignition and wait 10 seconds at least before you turn it on. The Toyota will go into learning mode as on this vid. This works on a Toyota Mk1 MMT. Cured all my jerky gear changes. Be sure to follow all of the steps properly and when he removes the ODB connector, that's when you remove the "wire" if you've jumpered the 4th & 13th terminals.
Hi do you know if its the same procedure with citroen c1 2013???
@Shane Chant, also to you, thank you very much for the advice of pin 4 and 13! I didn't have an OBD connector, so it was very easy!
Please can have your wattsapp
Do i need to do this before changing the clutch plate?. The dealer said the car needs to be put into a strip down mode so the clutches can be locked?
@@tiresombeast677 Hi - I'm not sure. This procedure resets the gearbox for use as new. I don't think it locks the clutches (but I could be wrong!)
Thanks so much ! I was having this flashing n nightmare and all what was needed was this! Now no gear problems and jerky drive 😅
Thank you!
Does dis repair the actuator?
Thank you 🙏, it really works and big difference. Like new now.
Great!
Many thanks for your help…very informative. He needs to be teaching mechanics as most DONT have a clue.
Thanks.
U are d master of Toyota..am still finding a mechanic in Wigan to fix my actuator problem... RRG Bolton Toyota company is charging me £4000 😢. Mechanic here can't really work on mmt gearbox...
@@freemaninegbedion8283 message me whatsapp, will help you +375 29 6353511
Many, many, many thanks for this tip, and great tutorial! It worked like a dream, the car drives, and changes gears, like it's new again, after this. Easy procedure too. Wow !!!
How did u get the diagnostic tool?
@@genesisyt4763 Buy the ODB adapter for manual procedure here
www.ebay.com/itm/273720409563?var=573278803874&hash=item3fbb01fddb:g:ZcgAAOSwaKVcbsnz
+
@Yuri Maevski,
It worked perfectly. Thank you for sharing your knowledge. Saved me a lot of time, money and trouble! Thanks again! Top!
can I ask did you used the OBD connector or it worked without using a reader?
+
Thank man this video was really helpful and it did work on my Toyota .
Thanks. Feel free to contact.
Great showing! love it!
+
Thank you so much very useful🙏🙏🙏
Thank you too.
Bro you rock
Thank you!
Thank you very very nice :)
+
Thank you :) Brother мерси много
A
Magic.. thank you so much
+
Hi Yuri, how to do this procedure if I have different car key? If the starts on a button start/stop.
A
Hello Yuri I'm having a problem with my Yaris 2007 mmt exactly the same as the one you have in the video, I changed the clutch actuator and it doesn't recognize me what I should do I already put the diagnosis machine help me please
Hello.
Make same video and send me whatsapp:
th-cam.com/video/xv_kAF42fio/w-d-xo.htmlfeature=shared
Hi Vak thank you for this video. I have no creep control and my gear changes are a bit jerky, will this procedure solve the problem? Thanks. My car is Yaris 2008 1.4 d4d MMT.
PS. I have no warning lights on
Hi.
May be, but do calibration only if have no codes.
th-cam.com/users/shortsW2DRdW2XflM?feature=shared
Thank you for your video. After doing everything you do in this video, do I have to relearn the shift values to the mmt?
Hello.
Thank you too!
What you mean?
@@vak_service I mean if I do exactly what you do in this video, will I be able to drive in E again without having to learn the mmt when to shift from 1st to 2nd, from 2nd to 3rd and so on?
@@dmasta779 better to drive one day like pensioner, next day the car will drive better
If this gear is an automatic manual transmission, should we change transmission oil ? And after how long should we change?
I am totally new for this gearbox 😅
This is manual gearbox with robot.
So yes need to change oil every 40-50.000km. Need to use 75w80 or 75w90 full synthetic oil about 2 liters
Thank you for the video. Is this worth doing, even though no parts were mechanically changed in the car (in case gear shifting is somewhat jittery)?
+
Hi.yuri. i have a 2008 Toyota Corolla mmt . I have changed the actuator and did the diagnostic test and clear all faults. The car select gear when its starts but after diving for s while it gets hot and then i stop the car goes into neutral and then it would not select any gear until i wait for it to get cool down then it will select a gear. I would appreciate it if you assist me with the problem thank you
Hi, before you changed your actuator did you ever experience a slight judder from the clutch starting off in 1st gear especially more so in the wet but disappear when the warms up and kind of slight jerkiness slowing down when coming to a stop thanks
@@gtibruce Hi mate, you appear to know a lot about cars. My car has been juddering before taking off and has some delays in changing gears. When I’m in traffic especially at low revs the car is always jerking. What do you reckon this may be?
A
@@vak_servicehi
Hi Vak , I tried now my N is gone . Nothing is showing.
Hi.
The car has some problem that need to resolve.
What the trouble code?
Hello Mate Hope You Are Well , today I changed my clutch to my 1.3 semi automatic Toyota , pls can you tell me what should I do ? I haven’t started the engine yet ? Thanks
Hello.
What brand of clutch?
@@vak_service It’s a Blue Print , Please
@@vak_service it used to be AISIN , but Autodoc Online Parts They Suggested me To Take The BLUE PRINT , and I don’t know a lot about it tbh
@@erionxhakoni4210 ok.
Need to adjust shaft of clutch actuator fully in by screwdriver - need to remove the motor. Then need to install it with no any gap to clutch lever and do calibration for clutch. Follow next video it contain all those details.
th-cam.com/video/CozMq_OkisY/w-d-xo.htmlfeature=shared
@@erionxhakoni4210
And this how to do calibration in details, use pause to not missing details
th-cam.com/video/UIKP7oULNLA/w-d-xo.htmlfeature=shared
I have repaired the electromotors of the shift gear and still is getting me out of the gear!! Is having same probem. Where can I buy a robot for this car model? I have same car as this on youtube.
+
Hi, I never hear the beeps, do I need to link pins 4 & 13 on the OBD please? is it the same procedure for Suzuki swift 3 2007? Thanks in advance for your help.
+
Hi Yuri
Thanks for the information , is realy Nice what You show to people , some info i need, what cain of ,,,conector,, fra Toyota You are uzing for learn the gears ? By video i can se is Toyota but for what ,how is call ?
Tanks for any answer
+
Hi I've got a mmt Toyota Yaris .. cannot get any gear symbols in the box on display ..have you any idea of problem thanks tony
Yes i have, message me whatsapp +375 29 6353511 Yuri
You can buy a blank connector off ebay and solder a jumper wire between pins 3 and 13
Sorry 4 and 13
Wish connector please for toyota ?
+
What problem fix this ? My gear slips on the first change .
This is fix some shaking or jerking of car on first, from first to second or reverse.
But this not solution if car has some problem and sometimes light up some trouble code.
@@vak_service ohhh, it’s sounds good. I don’t have any cods but it’s shaking on the first to the second. I will try to do as you did .🙏
@@abbealnaji331 yes. Just after that drive slowly about one day, the car will calibrate himself.
hello I carried out the procedure as shown by plugging 4 and 13, when starting there are no more lights coming on and the gearbox always remains on N. Can you help me I did it on a suzuki swift
Hello.
With suzuki swift it not working.
Suzuki has same system but not same diagnostic.
Check for codes with some scanner, may br try with ELM327 and app CarScanner
hello thank you for the information I will try with car scanner
and thank you for the help you gave us all, you are a champion@@vak_service
was this because you had some clutch slip mines do 48000 and slipping a bit yuri or is it new clutch and forget this.
+
Hai, after prepair new cluch is bij Flashing N continue en it wil be not selection gear. Please can you help me?
A
Dear,
Can I apply for Toyota aygo plantinum 2008 model?
Same procedure or any difference please guide me.
+
So, dont you need to clutch initializition as well ?
+
Hello my neutral keeps flashing ?
What do i need to do ?
Change your clutch
@@paiwandmustafa5324 already changed !
Keeps flashing
@@redliaga Change the actuator ??
A
Wish connector did you use please ?
You can use bridge between 4 and 13 pins.
What oil engine do you use guys on this cars ? Brand, specifications?
5w40 or 5w30 full synthetic - best choice
I can't do that because mine is start button no keys is any help plz ?
+
What is connector director called???
obd connector adaptor
+
Hello, I have a big problem with the Yaris 2007 MMT. After a longer drive, the N started flashing and stopped shifting. After 3 months in the service, I bought a new actuator, clutch, box computer. The procedure was tried from the computer, but it did not work with the computer. I managed manually with a strap in pins 4/13 N++++EN then N----EN then N+-+-EN , it worked, after 3000 km it started to jump out of gear and flash N . I set myself up as a craftsman and tried the Learning Mode procedure, the one above. N has disappeared, I don't know what to do to at least make it go like before, even if it jumps out of gear. Please give me some advice, the car doesn't move, N has disappeared.
If N has dissapeared you have to change clutch actuator, N dissapeared because it won’t insert any gear it went out completely
A
Hi
How do you do this if you have a push start ignition as it turns on as soon as you pres the brake?
Have you find any solution because mine is the same
Thanks
+
Is this procedure recommended to fix a jerky gearbox on a Yaris?
And I take it you have connected the adaptor but do not have it connected to a laptop running techstream?
I’m having this problem as well, the gearbox is very jerky. Did u find a fix for it
A
A
BONJOUR
Vous pouvez m'aider impossible de faire l apprentissage de boit MMT avec le diagnostic ou manuelle
J ai changé le calculateur neuf au moment je lance apprentissage Le N disparue de tableau
Actionneurs neuf je comprends rien
Au moment de lancer apprentissage ca réagit pas
Merci de votre aide
Message me whatsapp +375 29 635 35 11
Hello, how can I fix my car, I have problem with Trassmision
+
Thank you :) it works Hahaaa :)
Where do you get the connector from?
I'm sorry to answer so late ... but now I've seen the comment, it's from Lithuania ... but I can give my connector
Or is better tell you what pins to connect with a cable or clip ... :)
A
Hi my Yaris 2007 MMT 1.3 makes thumping sounds when it changes gear specially gear 1-2soft acceleration but if you give hard acceleration not an issue? Any advice please
Hi.
Check for codes, if no codes - do calibration for clutch (if no codes only!)
If no help, check for mount of gearbox, shafts or other mechanical problem.
If clutch actuator not working properly - you will have some trouble code.
thank boss ..I find your channel excellent and it is very kind of you to help people@@vak_service
Hello- but can a faulty actuator on yaris mmt make thumping sounds when changing gear e.g. thump...hestitates and then moves and sometimes it shakes when reversing
I have a yaris D4-D 07, I bridge 4 & 13, things start flashing on the dash board do the 7 pumps of the brake but get no beeps.tried this quite a few times. I dont know where im going wrong.
Do it mor fasters
message me - will send you the notice about it
+48514732532
@@vak_service thanks for the reply. I will try doing this faster if not I will drop you message on whatsapp
@@adeaustin3716 Ok
2008 auris mmt 1.6 goes into neutral whist driving (flashing N) then I have to turn off ignition for 10 seconds then start car then everything back to normal.. until it happens again of course.. any smililar experience or ideas as to what it is? It would be most appreciated.
Hi buddy, same issue with me do you manage to solve that?
@@xyz212123456 I didnt drive it for a few weeks then I started driving it again has been a month or so now the issue seems to have disappeared, sorry that's all I got, but if it happens to you just drive in sports mode or manual.
@@rfayz733 didn't try on sport mode but same problem with manual mode, if I stopped at lights it going to neutral flashing N and beeping.
Get a new clutch stroke sensor, fit it in, then do this procedure
see the comment by bazhokbaz in this link: www.toyotaownersclub.com/forums/topic/137847-mmt-gearbox-yet-again-flashing-n-in-drive-positions/
@@xyz212123456 just git mine seen to have to get a new clutch,
Please chief, wich machine use
+
Can I change this MMT to a standard automatic? I'm tired now.
Message me, what the problem? I helped alot - all cars working without any problem.
At that point just change your whole car bro😂
Thank you for your video :) i have a yaris 2 petrol 1,3 with this mmt gearbox and i think the clutch is dying my car doesnt respond to more than 2000 rpm accelerations. Only Toyota can do the clutch change and its very expensive, do you know were i can find a cluch? And if there is some tutorials on how to change it? I looked on youtube and the only one talking about it is you. Thanks again
i have had same issue and changing clutch was the only option but it still cause problems after placing a new clutch . not worth it to spend more money on this Car
@@sonayvaio it didn’t drive smooth after replacing the clutch? Can u explain what happend pls?
Cuz i have a Yaris 1.3 petrol MMT gearbox i would like to know ur experience...thanks in advance
A
can it also be done without connecting an obd connector?
@@vak_service thank you for your reply. My car gives some initial jerks in first gear and R when the car is cold. Do you think this can solve my problem? If yes is it safe to perform and it is not going to result in any fault in ECU of car?
+
Юра на что обращать внимание при покупке робота с пробегом 150тыс?
можно ли определить сколько проживет сцепление?
спасибо
A
Hi Yuri where to buy this conecter
Did you find the answer???
@@jayh7821 ebay
A
Tank you so much
A
What is the director and where we can find-buy this?
+
Can I try this on peugeot 107 semi auto
A
I know im late, but it’s the same gearbox if you haven’t done already do it
@@kr1ss00 Yes, peugeot 107, citroen c1 and toyota aygo - them fully the same and it is toyota aygo.
is there an english version?
Same I can’t understand
+
Hi
I just change the clutch in my toyota aygo 1.0 the car don't won't to start in the dashboard when I shift it's just a blinking N can you helpe me pls
Hi i expect you have cured the fault by now but was it the auto model because they have to be reset as we see here. So does the manual have be too or was it something you overlooked? Just curios thanks.
A
Mine not n display
+
hello Yuri , i was driving my toyota yaris 2006 , i was in traffic when the red light on dashboard appeard, the gear was at E and it didnt accelerate, after 2 - 3 sekonds i was pushing the gas pedal it started accelerating. Do you know why this problem occur ?
Hi ihave 2010 toyota verso MMT after replacing clutch system the vehicle would not start please need your help thank you
I have same problem.but I quickly turn off the engine and again turn on engine .it work fine.
From what I know this means you need the clutch changed and reprogrammed again. Happened to someone who I know. Plus it happen to me today so I will need to get it changed also. Also my car had been driven 6-7 hours before problem occurred.
+
Hi. My friend just got a used Pug 107 auto with the 3 cylinder engine and this type of gearbox. Is this a one clutch box like the Smart car or is it a dual clutch gearbox? I want to be ready to help for any repairs or diagnostics. I have seen a video for a clutch servo motor repair but nothing else. Can this be done with no laptop or obd tool?
Thanks
Nope these are one clutch box like Smart...actually Smart use the same gearbox as Toyota, Peugeot, Fiat etc it’s called “robotic gearbox” and it just has a traditional clutch like a Manual but ofc it works Automatic
A
I had an issue on a 2010 1.4 D4D semi automatic, after a clutch change it was coming out of gear, waiting a couple of minutes and driving on.
I could only find one matching actuator off a 1.3 petrol, they look 100% identical, are the motors etc the same?
Also the car does not start since replacing, any ideas please?
+
Hi engineer yuri , i have corolla 2009 mmt and i try to do the sequence but the car doesn’t peep after pressing fast on the brake pedal seven times !!
Hello you need to press the pedal 7 times fast in an interval of 3 seconds, if this doesn't work switch of wait 15 seconds and try again...
@@mynormorales6870 I tried so many times still no beeping, recorded time pins definitely short as dash lights are flushing. Don't understand that.
A
Never see headche like this shit
+
Can't even understand u
Hi. Understand what?
Are you drunk? you talking so:)
+