MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP

If this video is helpful to you, buy a coffee for more inspiration: www.buymeacoffee.com/systemzone
ECMP provides almost 100% reliable load balancing and link redundancy solution. ECMP is a per connection load balancing where connection is marked with source and destination IP pair. In my previous video I discussed how to configure DUAL WAN load balancing with failover using ECMP method where WAN connections were static IP Addresses. But some ISP companies use PPPoE service for their client connection. So, some network administrators become confused to configure load balancing with PPPoE WAN connection because PPPoE WAN connection is a little bit complex than static WAN connection. Some of my loyal viewers also ask me to make a tutorial on Load Balancing with PPPoE Client. So, in this video I will show how to configure Load Balancing with Failover over two PPPoE WAN connections and one static WAN connection in MikroTik Router.
For more detail: systemzone.net/mikrotik-load-...

[@alucard77719]

Thank you brother for sharing your talent.

[@paskwaleajule5544]

Thanks for the video, ur explanation is clear

[@farhadmobilesolutions8610]

Thanks for video bro 👌👍

[@A3M3A3N3]

thanks sir ji woking well
kindly make more videos

[@ehsanulkarim]

The failover and load balancing works fine , but I am having issues forwarding ports after multiple routes are added, do you need to do something special ?Can you help?

[@kelvinpac]

When using static IP Addresses for load balancing and failover, then one of the upstream routers loses connection but still supplies a static IP to the bonding router, I found that this causes problems in the whole network as the bonding router will try sending traffic to the static IP for the router which has no internet but is still on. How would you fix this?

[@domx8]

Hi, how can i configure WAN1 to provide internet to Eth3 and WAN2 provide internet to port 4?
One MikroTik with 2 WANS PPPOE but each eth ( 3, 4 ) each provide separated internet ( wans )

[@user-um4by8xt1z]

hello, it is a good learning process. is that all on mangle rules as compared to 2ppoe load balancing ? also passthrough part...

[@SAGGUSUMAN]

Is it possible to run 2 pppoe wans on same ethernet port and divide traffic across both connections

[@philipokisegere31]

Iam having 2 modems(DHCP) both giving 10mbps...How can I implement using ecmp so as to get 20mbps.

[@larrybml]

Can someone help me with a tutorial for failover and load balancing for 2 WAN connections and 1 LAN , WAN : 1'st PPPOE and 2'nd Fixed IP ? Thank you!

[@rosyprakash]

Can you tell how to do with 1 ppoe and 1 DHCP, what changes can we do in in DHCP instead of sttic.

[@m.cresetyourmind.8138]

i tried this with a pppoe server what i saw was ....clashes can you help what to do if i want to add a pppoe server on it

[@robbobrave]

12:22 You have changed to_wan2 mark route. I think that you should copy and add to_wan3 mark (you have 2 marks, not 3)

[@johntuxies9720]

Could you extract the config please?

[@SystemZone]

ECMP provides almost 100% load balancing and link redundancy solution. ECMP can be configured either static WAN or PPPoE WAN or combination of both connection.

[@us5109]

need help cell number?

[@chianhnhat4783]

@@us5109 hi, i very looking forward to openvpn beetween pfsense and mikrotik from you.

[@renerexrasimo8211]

hi sir need help dual ISP PPPoE+DHCP config thank's sir

[@DominoFiberOptics]

Sinay sinay

[@akshayoriginal]

I hit an issue with setting this up on Router OS 7.1 The routes are differently configured here. Can you please make a video for Rourter OS7?

[@SystemZone]

I will make it soon brother.

[@su666i]

You can update this explanation to version 7

[@SystemZone]

Sure, I will do soon

[@sokhakho7154]

i see diffrent interfaces on mikrotik v7.11.12

[@alucard77719]

Please share load balancing for unequal WAN links

[@SystemZone]

Follow this video: th-cam.com/video/1QULqbR_-DQ/w-d-xo.html hope you will get idea.

[@talathussain6540]

How to add different natwork adapters in Gns3

[@SystemZone]

Do you want to add another network adapter? If so, right click on router and click Configure and then click on Network tab. Now put how many network adapters do you want in Adapters input box.

[@talathussain6540]

@@SystemZone i mean i have lan and wifi adapter in my laptop on which im working. So how can i add/use both as my WAN interface in Mikrotik in GNS3.

[@SystemZone]

Follow this article: systemzone.net/mikrotik-router-integration-and-configuration-on-gns3

[@md.rifatshikdar8160]

Dawnlode faild hoy jay

[@akshaym3647]

Mikrotik router and Cisco switch LACP configuration

[@akshaym3647]

Please

[@rezaberg2886]

Thankss for the information,, subcribe n like from me

[@etcmusiccamp3147]

Call

[@mettalika1]

very awful describing