2008-2015 Mercedes C250 Door Handle Replacement
ฝัง
- เผยแพร่เมื่อ 20 ก.ย. 2024
- 2012 Mercedes C250, includes 2008-2015, door handle replacement. I am doing the driver side door handle but this applies to the rest of the doors as well. Some of the tools you will need are: drill and drill bits, trim tools, 10 mm socket, ratchet/impact driver, phillip screwdriver, and a pick. You may need more but atleast these will be needed. I did order the new one from Amazon as it was cheaper there than anywhere else.
Parts:
Amazon link: amzn.to/3FiSrOl
Instagram: / 0p_0verhaul
I called Mercedes to order a replacement handle, they told me they don't sell just the handle, I had to buy the door panel (which included the handle) for $1600; I hung up and ordered the handle for $22 bucks online and plan to replace it myself after watching this . . . . . . . That's nearly a $1600 savings . . . . . . . Thanks for posting this!
Yeah they will not sell the handle individually. The whole design is unnecessary. I'm glad I could help you out. If you need anything else feel free to ask.
They just told me $700 + tax to replace just the handle 😂
Mercedes doesn’t buy eBay does😊
Wow! I was told the same thing. Did yours reconnect correctly?
@@demarcuswilliams3102 I ended up replacing just the handle at a mom and pop place that specialized in German cars.. still costed me like $390
Thank you for this thorough video. You probably saved me over $500 instead of going to Mercedes.
Thank you for the video you just saved me 800 bucks from the dealership, they said some assembly needs to be replaced lol
You are welcome. A lot of the time the dealer quotes an entire door panel which is pretty expensive on these. Thank you for the watching it as well.
@@operationoverhaul liked and subbed to
Thank you for this! I got stopped trying to figure out how to remove that pin in the handle. You just set me back in motion!
Your welcome. I'm glad it helped you out. These are notorious for failing and I wish they would have gone with a different design.
S was
Damn , my w204 door handle just broke. Seems like a lot of work. Thanks for the video.
Your welcome and luckily these are non-interference engines. It can seem intimidating but if you have the right tools and some car knowledge, it actuly goes pretty smooth. Hardest part was breaking and compressing chain links.
@@operationoverhaul thanks for reply, did you also order this new handle from the same link you put in description?
@@obahhtv4082 yes, it was the exact kit I ordered. Also, in my last reply I did not mean the chain I meant removing the plastic after cutting the hold downs with a drill bit. Sorry, I was thinking about something else.
I need help bro. Mine happened today
Mine happened just now😢@@PeterEnaburekhan
Great simple and straightforward video! Thank you for taking the time!
Your welcome and thank you for the comment and view.
MAN!!!!!! That's a lot of work ... should I do it myself or bring it to the dealer...... thank you for the vid 👏👏👏👏👏👏👏👏👏👏👏👏
I know the dealer here in my area will not do a door handle repair but rather quote you an entire door card/panel assembly which is crazy expensive. If you feel comfortable with pulling the panel then the rest is actually rather easy.
@@operationoverhaul after I saw you doing all that work forget it but then again I'm sure the dealer here is going to tell me they don't do handles and I'm sure like you said it's very expensive.... thanks again for the info 👍👍👍👍👍
@@williewilliams8707 Your welcome and thank you for wathcing.
This is so much work to fix. I would mentally lose my mind lol
They turned a simple task into an overly complicated puzzle. Plus, this is a common problem and the true correct way to solve it is to replace the entire door card assembly.
Yes! I have the same problem with my C250. I just haven’t had time yet. Doing it next weekend I think lol
@@operationoverhaulit’s $20 for the replacement handle, around $200 for secondhand door card assembly or new door card from Mercedes is $2000. I know what I’ll be doing, $20 and a couple of hours or finding a motor trimmer who can repair.
Thanks for the video saved me a lot of money didn’t save me much time tho. that’s okay I got it done thank you sir
Glad I could help
Thank you sir, your directions were clear and easy to follow.
You are welcome and I hope that it helped you out.
Thank you sir! Helped me change my power window switch out with a new one👌😁
You are welcome. This video gets more views than any other one I have. It is a common issue along with the window switch
Just bought a 2011 used with a broken handle and window switch! Guy who sold it never mentioned broke switch after telling us the handle was an easy fix.
Thank you for this worked like a charm
You're welcome and I am glad that it helped you out.
Thanks, this helped a lot. greetings from Germany ✌️
Your welcome and I appreciate the view all the way from Deutschland.
Can’t believe I have to go this process 3 times… I have 3 door handles to replace
Wow, sorry to hear that. Mercedes really dropped the ball on the design and material choice for these door handles. I will someone made a good quality aluminum replacement for these because that would eliminate most of the issues. Hopefully it goes fairly smooth for you.
Nic nie zrozumiałem, ale film dobrze zrobiony i dam rade naprawić klamkę. Dziękuję
witam i przykro mi, że nie mogłeś tego zrozumieć. jeśli potrzebujesz pomocy, mogę Ci wysłać wiadomość, jeśli masz jakieś pytania.
Thank you for this information! This tutorial is so helpful! Wish us luck!
Your welcome and just take your time. Also, it does not take much force to drill those holes, so be gentle doing that.
Thank you for sharing something helpful.
Your welcome. I'm glad it helped you.
Thanks for the good tutorial!
Here are a few things that I ran into that others may also find:
1. The upholstery padding on top of the door card (the part that tucks into the panel you're trying to remove) got plastic-welded to both long tabs. So I had to use a sharp edged tool to cut it free where it was stuck onto the connecting panel. Have to be careful not to peel the upholstery up and off the panel where it shows in the car.
2. The last white melted tit on top on the door latch side was too shallow to get a screw into, so I left it without a screw. Otherwise a screw would have punctured the upholstery on the other side of the door where you see it.
3. I used a 1/2" drill bit to cut the melted tits. I made sure it was sharp like new, and used very low rpm's like you did.
4. The door handle pin didn't extract like you said it should. So I had to use dikes to nip apart the handle down to the pin. I had 1/2 the pin showing full length. Then it still fought me to get it to pop out the back of the panel.
5. The customer purchased a metal handle (Made in CHIna), so hopefully it won't break again.
6. The new pin was too tight in the bore. So I had to tap it in with a backup piece so as not to damage the end of the pin. The end of the pin that didn't finish flush like the original one. It stuck out about 1/8". The handle pivot was a bit 'tight', but it worked good nonetheless.
7. The new cable keeper clip that was in the hold of handle wouldn't hold the cable in tight. So I replaced it with the original clip.
8. I removed the entire upper trim plastic. Made removing the door card much easier.
9. The BIGGEST improvement was I pilot drilled every hole to the bottom of each tit using a 1/16" drill bit. Otherwise, most of the screws would have wallowed-out the tit and been useless. Pilot drilling made all the screws go in good and tight.
Again, thanks for the informative tutorial!
Good tips on everything. Hopefully this will help someone out and I like the pilot bit idea. This will make for better cuts.
Thank you for the video, definitely helped a lot
Your welcome. Glad that it helped you out.
Really appreciate this video!! My dad and I did it today but he broke the fragile plastic piece would that cause any problems??
Your welcome and if it is the plastic piece I am thinking of, it will not be a problem except you may not have the lights working around the door handle with the leds
Do you have a video on how you got that piece off, I’m hung up on that and I don’t want to break it? How is it held in? Where do I need to push to release it
Just took a little finesse but I got it, nvm.
My girlfriend's C250 has the same issue. Thanks!
Your welcome and the design of this is not a good one. They over engineered this for what it is and used either cheap plastic or the wrong plastic for it.
@@operationoverhaul They certainly did... my fat fingers will surely break the LED connection.
I thought the first time I did this I would too.
another question, can we do this without removing all the wires and drill the panel? Why cannot we just replace the door directly after taking out the door panel?
You can, I called the dealer and was quoted 1600 just for the part. They don’t do all this work. They just replace the interior door and wanted to charge 860 for labor. Way too much. I’d rather try this for 20.00 and waste 8 hours of work. Lol!
Great job explaining.
Thanks I appreciate it. I do not like the design of these door handles. Much better way of doing them.
Thank you , good info
You are welcome and if you need anything else feel free to contact me
Thanks
Your welcome and thank you for the view.
You are awesome thanks for the tutorial, and the link to buy the parts. Look like it took you 3hr to complete?
You are welcome. It took around 2 to 3 to complete. Could have done it quicker but I want to take my time and not destroy anything else in the process.
Hello sir I need your help after fixing on the door the best I could my door would not lock or unlock. Please help.
I was about to reply then I saw your other message.
Thank you, thank you, thank you!
Your welcome. Thank you for watching and I am glad it helped you out.
Saved about 1,300 by watches this and other videos.
Mercedes quotes you an entire new door panel/card which is ridiculous.
Thank You!!!!
Your welcome and thank you for watching. If you need anything else just let me know
I have a 2012 mercedes c250 sedan and the door handle broke off on the driver's side. I ordered a replacement on Amazon with screws for $10 before tax. It seems fragile and plastic. I couldn't find a heavy-duty version.
Yeah, none of them really feel great. I wish they would make a more durable upgraded handle that you could purchase.
How long did that handle last. I got one from Amazon for a different car. Broke in less than a week.
The handle on this car is still working to my knowledge and I do the maintenance on it. I have not seen it in about 2 or 3 months since the last service.
What’s the plastic thing connected to wires you said can easily break it broke😭😭
It has been a minute since I have recorded that lol, but if I remember correctly it is part of the light that illuminates the door handle. I'll look up the schematic and see if I can find the exact part for you.
@@operationoverhaul thanks brother I’ll try too find I’ve been looking it’s no big deal just a light!!
My c300 handle just broke, wish me luck you all
Just take your time and you will be good. Once you start, it will not be as bad as you think.
Did it work for you mines just broke
Mines just broke in my c300
Where are you located? This happened to my c250. If your near me, I would like to make an appointment and get it fixed with you. Thank you
I am in south carolina. Where are you located?
@@operationoverhaul thank you for your response. I am in kennesaw Ga
Man are you near Arkansas? I would gladly pay to have mine door handle fixed. My wife pulled on the handle one day and it broke.
Yeah, I'm probably a further away than you want to drive. Such a common issue on these cars.
Door lock would not lock after I closed the door thin it locked
I think it would cheaper to bring the car to you and you fix my car handle..... are you in or close to New York?
No but I did live in New York for about 5 years though. What part of New York do you live in?
@@operationoverhaul
I live in white stone queens
Does someone know what the white piece that goes into the handle to keep it together is called mine broke and the kit i got didn’t come with that piece
www.partsgeek.com/lpt29kd-mercedes-c250-door-handle-clip.html?YN&PartsGeek+Google+Base&+Mercedes+C250+Door+Handle+Clip+APA%2FURO+Parts+10-15+Mercedes+Door+Handle+Clip+2013+2011&srsltid=AR5OiO1p35XSrXfxe3eljblPUK82a2mIOJTpz_TJLweye30EO0XkupJEdcg this should be a link to it
A question, if I order a new indoor panel, do I need to go through this process?
If you order a new panel you do not have to go through all of this process. You just remove the panel and replace the switches from the old panel. The new one will have the door handle on it.
Question - For a 2013 e350 - I needed to replace the rear passenger door.
I was fortunate to find a replacement that matches except for the exterior door handle. The original door has the touch sensor, the replacement does not. Would the replacement door be wired for the touch sensor handle.
You would more than likely have to replace the door handle and wire it up to make it function correctly. If it was my car, I would try to switch everything from the old over to the new door that you are able to salvage to make the swap easier as well.
Swapping the doors and interior cards was easy. The non touch handle matches the cars paint, the touch has a chrome finish, thus changing the handles is a must. I want to avoid a situation looking for a connection that doesn’t exist.
from the looks of it, if everything is changed, then you should be good and have all the same connections.
Did anyones car not start after fixing the door ? Mine says SRS malfunction and wouldn’t start. Please help!
What year is your car?
@operationoverhaul what can be done if this happens? I have a 2013.
The plastic thing In the old door handle is now stuck is there a different way I can get it out or is it gone ??
are you referring to the pin in the old door handle?
@@operationoverhaul yes, I keep trying to get it out but I’m afraid I damages it too much. I’ve tried many things but it’s as if it’s not coming out.
@markeviouskeys7627 you can drill it all the way down and if you use the kit I used it comes with new ones
Would a 2010 model exterior skin door fit a 2013 model?
They should be the same thing. From everything I looked up and read, they are the exact same door inside and out.
I accidentally drilled through the plastic so the screws won't catch. Can I wax it together? or use longer screws?
You could use longer screws, just be careful not to go through the other side of the door panel. I do not know if this will work, but you could possibly try using an epoxy glue to build up the area again and try screwing into that.
Wished you showed how you disconnect wire in 7:05
Sorry about that. I actually just realized that it is a different style of plug that some people may have never seen before.
I’m about to sell the whole car
Nothing is easy to fix on these cars. They over engineer everything.
What size is that drill bit you used
To be honest I cannot remember. I thought I had mentioned it in the video. Let me re-watch it and see.
From the looks of it, it is more than likely a 1/2" bit.
@@operationoverhaul thank you sir I will buy it and try it and thumbs up👍🏿👍🏿🤟🏿🤟🏿
My car shut down. Suggestions?
It shut down after you fixed the door handle and will not crank back up?
@@operationoverhaul The car was moved immediately after, and then it would not crank back up.
@@operationoverhaul The car was moved immediately after, and then it would not crank back up.
@@LifeInspiredNetwork any check engine light?
It’s ok sir I got it now I got a little scared for a moment
What was the issue?
Poignée porte arrière gauche
Avez-vous besoin d'instructions ou d'un lien vers une poignée de porte arrière gauche ?
Lavoro ottimo ma da orologiaio. .non da meccanico.
Grazie e penso che un orologiaio sarebbe più noioso e più talentuoso di un meccanico. Scommetto che la tua attenzione ai dettagli è notevole.
This is why I buy BMWs. What a fucking joke
I do agree this is a bad way to do this but both bmw and mercedes have their issues. Just depends on which ones you are willing to deal with more. But this could have been a way simpler job.
What a stupid design
i agree totally. They could have made it so much simpler but they had to over-engineer a door handle.