I see guys complaining they can't hear you. I'm from the United States, I can clearly hear you, with a moderate Eastern European accent. Clearly English is his 2nd language, but i had zero issues understanding.
Well and thanks again..,but I've a question please! what can i do if my TECO e310 vfd is showing LU on digital screen and REV signal on remote controller pad??
I've got a 50 hp f510 teco. Under motor parameters rated current, I can't get it to go above 9.2 amps, which coincidentally is the max amp rating for the 5hp 510. Is there a hidden menu to access the max motor rated current? Makes sense it's hidden or hard coded so folks don't fry the drives. Any advice?
Some drives do allowed it some don't. To be hones, i don't know way they would, that would eventually damage the drive. I have never tried to go above it for this drive so wont be much help for you here. Sorry
The documentation thatcomes wit the RS version is confusing/wrong. Your video helped me to get the beast working. Is it possible to display the motor RPM? Is so a vid would be great.
Do you know a way to change the frequency adjustment increment? I have E510's with no potentiometer, so I have to sit there and mash the up/down arrows for a long time to get from 0hz to 60hz (US)
I have never done it on this drives, but some have option to increase the sensitivity. Usually by increasing acceleration time should allow you to increase speed faster.
I see guys complaining they can't hear you. I'm from the United States, I can clearly hear you, with a moderate Eastern European accent. Clearly English is his 2nd language, but i had zero issues understanding.
Well this got me out of strife today. Thanks for putting it together and uploading it. Cheers.
Hi there. Am glad it helped you out. That's way these videos are for.
Really thank you for this beautiful and clear explanation
Thanks your video saved my job❤👍
I am building a big workshop air scrubber and I would like to thank you for your input on this inverter
Your wary welcome. Am glad it helped you out.
thanks for a good video~ please make sure you speak as clearly as you can because it is often hard to catch what you say . Thanks again
Well and thanks again..,but I've a question please! what can i do if my TECO e310 vfd is showing LU on digital screen and REV signal on remote controller pad??
good afternoon. how should i set it up for the motor 220v 1.5kw 5A 400Hz 24000rpm ?
Which is best Switching frequency / carrier frequency settings for a motor provide by drive ?
Just connect him to your computer and life will become so much easier
Thankyou I couldn’t have got this working without this guide, you are awesome
You're very welcome!
When I upload to the device it is encoded with cl what is the problem
I've got a 50 hp f510 teco. Under motor parameters rated current, I can't get it to go above 9.2 amps, which coincidentally is the max amp rating for the 5hp 510. Is there a hidden menu to access the max motor rated current? Makes sense it's hidden or hard coded so folks don't fry the drives. Any advice?
Some drives do allowed it some don't. To be hones, i don't know way they would, that would eventually damage the drive. I have never tried to go above it for this drive so wont be much help for you here. Sorry
@@IGSElectronics I figured it out. There's another menu level that's not published. Fixed
Can you please do one on the TECO E510s please
The documentation thatcomes wit the RS version is confusing/wrong. Your video helped me to get the beast working.
Is it possible to display the motor RPM? Is so a vid would be great.
Set parameter 12-04 to '1'
When I upload to the device, it is symbolized by a letter CL
Do you know a way to change the frequency adjustment increment? I have E510's with no potentiometer, so I have to sit there and mash the up/down arrows for a long time to get from 0hz to 60hz (US)
I have never done it on this drives, but some have option to increase the sensitivity. Usually by increasing acceleration time should allow you to increase speed faster.
Brilliant thx brother!
My pleasure!
My question is trying to program for piece per minute. Where to program frequency to say 120 pieces (displayed) with frequency at (guess) 48.7 htz?
On an E510
@@louiealberigo5151 you will need the plc or some external smart relay for it.
Can I run a 3 phase motor with it by supplying single phase electricity?
Yes that is correct
Can I run 2800rpm 3 phase motor at very low RPM with this?
What does the driver mean by giving the CF-08 code?
as far as I know this code is for different teco drive, that I have not worked on yet. Sorry wont be much help here.
Please hell me about Parameters Teco t310 4008-H3
Mate, put some tape around the shaft to hold the shaft key. You will loose an eye or your camera. Safety first!!
You mumble too much bro
Thank you.
Terrible, in a hurry andI can’t understand what he is saying most of the time.