TP-Link CPE710 TX and RX step by step setup for a building-to-building connection

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ต.ค. 2024
  • Here is our full step by step setup for a building-to-building line of sight 5Ghz WiFi link using two TP-Link CPE710 devices. This is for a customer who has multiple units in a small industrial area. One of the units is currently using a 4g router but cannot currently access resources on their main unit network and it's not a very stable or high-speed connection currently.
    This solution is inexpensive and will link both units to the same network allowing them to have a single network across multiple locations.
    You can find the CPE710 device here: amzn.to/3Td6drp

ความคิดเห็น • 85

  • @adibalbukhity139
    @adibalbukhity139 4 หลายเดือนก่อน +5

    I swear to you that you are the best person who has explained the installation method smoothly and perfectly, thank you

    • @melonmusk3976
      @melonmusk3976 หลายเดือนก่อน

      I wouldn't say perfect!

  • @brucefay5126
    @brucefay5126 10 หลายเดือนก่อน +3

    I’ve been binge watching videos on wireless bridges as I will probably install one rather than trench in an underground cable. Your video is much better than the others I have watched, but almost all of them distinguish the two units as a transmitter and a receiver. They are both actually transceivers (transmitters and receivers); if they were not, they would not be able to communicate wirelessly. But you also refer to them as an Access Point (AP) and Client, which is correct terminology for your application. (Master and Slave might also be appropriate in some applications.) Thanks for taking the time to dig into the configuration menus for this device.

    • @melonmusk3976
      @melonmusk3976 หลายเดือนก่อน +1

      Yup, your comment beat mine to it.

  • @xtremelad
    @xtremelad 24 วันที่ผ่านมา

    That's what I would call a proper session I was thinking about getting one but will stick with my simple extender😊

  • @try-that
    @try-that 2 ปีที่แล้ว +4

    That was easier and more straightforward than I expected. Nice one.

  • @PranayKotapi
    @PranayKotapi ปีที่แล้ว +5

    This was so damn helpful, amazing work! Thank you so much I now connected 2 homes using networking
    One helpful tip -
    The Client configured device's output will be the Internet you will need to receive - just connect it to your home router's main WAN connection slot.
    This way you can have one house transmit its internet from your server device
    the other house can receive the transmitted network via the client - the client can have a router(s) connected which can transmit the network to it's devices

  • @xandra9107
    @xandra9107 ปีที่แล้ว +1

    Great explanation. The setup should go swiftly and with ease now. Thanks!

  • @ianhacon7563
    @ianhacon7563 ปีที่แล้ว

    I am eternally grateful for yourm superb effort in how to set up these damn things...Sadly they are installed but I can still do as you suggest in situ.. I hope I have success....

  • @joshbutler1020
    @joshbutler1020 6 หลายเดือนก่อน +2

    Great video! Setup was a breeze after watching this.

  • @nestoraoc32
    @nestoraoc32 ปีที่แล้ว +2

    Great! You really test with a real equipment!

  • @tb129tlh
    @tb129tlh ปีที่แล้ว +1

    Thank you for the vid. Had to edit this because I see you already answered the pairs question.
    But one more question another RX pick up this TX signal, by another RX! I mean a smartphone, laptop, or IOT device and eliminate the need for the second device?

  • @howardfine2209
    @howardfine2209 ปีที่แล้ว +1

    excellent,thanks so much.i just bought two of these to do exactly as you just demonstrated.

  • @IanBondMCS-stoke
    @IanBondMCS-stoke ปีที่แล้ว +3

    Hi, could a single cp710 be used as an access point? i have an outbuilding across the yard i need to beam wifi into and this would be ideal as have line of sight straight into it

    • @curtis_75706
      @curtis_75706 ปีที่แล้ว +3

      Yes. Your cell will pickup the wifi with just the AP. However, if you want to add a wifi router at the outbuilding, you need a client device.

    • @Bee.23
      @Bee.23 ปีที่แล้ว

      I’ve done this and am currently watching this video troubleshooting as it suddenly stopped connecting; I’ve used it for four years without issue prior to this. Was beaming internet from the house to my garage on the property

  • @Thesocialgarage
    @Thesocialgarage 4 หลายเดือนก่อน +1

    On the receiving (slave) side, can I then just connect a mesh router to the dish so I can connect wireless camera's etc? Trying to send wifi from our house, way out to the road so we can install some security camera's.

  • @pepperillo
    @pepperillo หลายเดือนก่อน

    Hi, great video, I wanted to know if it is possible to connect the transmitter to my network via WiFi and if I can connect directly to the receiver via WiFi

  • @kennyduncan7762
    @kennyduncan7762 ปีที่แล้ว +1

    How easy is it to align these units when 1km apart? I assume they are directional with a fairly narrow beam (or are they?). Thanks.

  • @federicog.donofrio2442
    @federicog.donofrio2442 ปีที่แล้ว

    Amazing video. Very clear, real step-by-step configuration, very useful! I just want to ask you why did you set it up to only AC mode, when the devices support newer (and better?) options. Thanks!

  • @emmanueleclem959
    @emmanueleclem959 9 หลายเดือนก่อน

    This was so educative and important. Thanks a lot.

  • @gigalo21
    @gigalo21 หลายเดือนก่อน

    doubt to get a reply but could i use the cbpe605 as a external antenna, many thanks

  • @duranopaulo
    @duranopaulo 2 ปีที่แล้ว +4

    Great tutorial.
    1. Can you pair different types of CPE’s? e.g CPE710 to CPE510
    2. How about using CPE710 as access point and use EAP’s on the other end thus it work between CPE and EAP pairing?
    Thank you from Cebu, Philippines.

  • @thatfunnykekguy6377
    @thatfunnykekguy6377 ปีที่แล้ว +1

    Hi there. Can I use this antenna while using a 4g hotspot to get a signal from nearest antenna?

  • @dr.bharatbapodara3223
    @dr.bharatbapodara3223 ปีที่แล้ว +1

    With one transmitter unit can we connect mobile wifi for internet.?? Range.?

  • @sherriwilliams719
    @sherriwilliams719 หลายเดือนก่อน

    Can you do a connection point to point with this tp link equipment to a tp link outdoor CPE 210 point to point? I bought one of each off of amazon not realizing I needed two of the same pieces!

  • @Qosmio1955
    @Qosmio1955 ปีที่แล้ว

    Excellent, helpful vid, though I would have liked to have seen the process of aligning the dishes (pan and tilt) in their final positions. The only thing I won't be doing is having an active radio sitting there with the feed horn point straight at my noggin...

  • @benmathew3204
    @benmathew3204 5 หลายเดือนก่อน

    Should the transmitter and receiver be in line of sight? I've some trees obstructing my second home.

  • @jamisonmunn9215
    @jamisonmunn9215 2 หลายเดือนก่อน

    So you would do this from two buildings and then could plug an access point into the LAN port on the client unit correct? Then you could have WIFI inside even a metal outbuilding?

    • @FrimleyComputing
      @FrimleyComputing  2 หลายเดือนก่อน +1

      @@jamisonmunn9215 yes that’s correct 👍

  • @redpanther999
    @redpanther999 3 หลายเดือนก่อน

    then after doing this setup, do i need a router for receiver to use by - connecting it through Ethernet cable, because the receiver most probably would be in terrace and the pc or connecting device would be ground floor ?

  • @MogogwaAngie
    @MogogwaAngie 3 หลายเดือนก่อน

    These are great demonstrated set up

  • @adampoll
    @adampoll 7 หลายเดือนก่อน

    I've setup 2 cpe successfully following these instructions but when I power down the AP it won't connect again until I factory reset both AP and client. Any help?

  • @MauriceMutetiNgundi
    @MauriceMutetiNgundi 5 หลายเดือนก่อน

    How far can it sent internet when used as an access point?

  • @sibonelogift5061
    @sibonelogift5061 ปีที่แล้ว +1

    Nice work but to me it hard to set up lol maybe you can help me set up my via team view if you don't mind with that am here South Africa i like tp link CPE710

  • @JoukoTo
    @JoukoTo 9 หลายเดือนก่อน

    Hello
    Is it possible to get the WIFI signal from the transimmter into a std wifi router ?
    OR do I neet a 2nd CPE710 unit to receive the internet?

  • @eomrat1
    @eomrat1 หลายเดือนก่อน

    I do not have the gray box you have between your laptop and the POE adaptor

  • @R3sp3ct801
    @R3sp3ct801 ปีที่แล้ว

    I hope I can make this question make sense.
    Is it possible to configure these PtPs to (Wirelessly) Daisy chain each other?

  • @TedEvanz
    @TedEvanz 2 หลายเดือนก่อน

    best tutorial i’ve seen

  • @DardaniaLion
    @DardaniaLion ปีที่แล้ว

    Can we use one of these antennas to connect to public internet? Let’s say I am not far away from a shop that has internet. Is it possible to point the antenna to that shop and connect it then attach it to a router which then can give me internet?

  • @eal1
    @eal1 ปีที่แล้ว

    I've had this set up for about 9 months but want to update the device on the receiving dish end that people connect to I.e. plug cable from dish adapter into that people then connect to WiFi with as it was something old and spare and it's slow. Can I use something like the TPlink RE650 WiFi extender or does that cable slot on that only emit to wired devices or will it receive the cable signal from the dish and output it to wifi?

  • @abishekbyju6074
    @abishekbyju6074 2 หลายเดือนก่อน

    Did you test the maximum speed that it can send or receive, just try to send a file between these devices

  • @c742y
    @c742y ปีที่แล้ว +1

    hi, can i connect a wifi router to the rx?

  • @emmanuelamarikwa
    @emmanuelamarikwa ปีที่แล้ว

    Can I connect the cpe610 to my work WiFi? Distance about 3km
    The work WiFi radio is Mikrotic router.
    How do I setup?

  • @jaikohn4754
    @jaikohn4754 ปีที่แล้ว

    What about 10 kilometers distance. Difference settings or the same?

  • @raulguerrero3170
    @raulguerrero3170 ปีที่แล้ว

    Can the CPE 710 recibe signal ( RX ) from the base and transmit signal ( TX ) at the same time to a 3rd CPE 710 simultaneously ?

  • @redpanther999
    @redpanther999 3 หลายเดือนก่อน

    can it be done in India as same with few changes ??

  • @Tbm-ov5ky
    @Tbm-ov5ky ปีที่แล้ว

    Can it deal with any obstructions? Say trees or rain?

  • @Ray-tb2ti
    @Ray-tb2ti ปีที่แล้ว +1

    What is the TP-link model of the POE adaptor ?

  • @DayanandSwamy-jy7yp
    @DayanandSwamy-jy7yp ปีที่แล้ว

    What if i want to connect to two or more devices as RX and one as TX, what are the steps to configure?

  • @Justin-hz8bh
    @Justin-hz8bh 11 หลายเดือนก่อน +1

    Everything in your video falls apart at 4:57. Where does the 192.168.10 come from? The 10? How come your Angry IP search range is .10's? After that point where I connect my internet to the injector as you state, nothing ever works again. I have to do a hard reset on the CPE710. I downloaded Angry IP and ran the exact same scan using your exact same parameters and got nothing. Not a single live port. There seems to be a lot of holes in this process.

    • @chandansatpola26
      @chandansatpola26 10 หลายเดือนก่อน

      I think he use another pc to connect to cpe710
      The pc which is already connected to the network.
      He miss to mention this...
      He use 2 different laptop's for this...
      You can see desktop icons are different at that time

    • @ji8in
      @ji8in 3 วันที่ผ่านมา

      He is already set the device to obtain dynamic IP adress. So when it is restated it will choose the network ip

  • @melonmusk3976
    @melonmusk3976 หลายเดือนก่อน

    1 km or half a meter?

  • @Sugarsail1
    @Sugarsail1 ปีที่แล้ว

    I'm wary of this product as it is vastly cheaper than anything of comparable performance. What's the catch?

  • @bowmosexual
    @bowmosexual 5 หลายเดือนก่อน

    Nice solution, I've bought Ubiquiti units in the past, a lot more expensive and not getting the throughput figures I'm seeing here.

  • @onlygatua
    @onlygatua 8 หลายเดือนก่อน

    Nice details. Very helpfull

  • @tothecloud7532
    @tothecloud7532 ปีที่แล้ว

    Wow you're awesome man, you kill it. thanks man

  • @jawadmnt
    @jawadmnt ปีที่แล้ว

    Pourquoi ne vous présentez-vous pas sur les téléphones ?

  • @premwarule5198
    @premwarule5198 2 ปีที่แล้ว +1

    I have tplink cpe 710 and I have gigabit switch with gigabit compatible ethernet cables but still tplink shows 100Mbps port and not 1000mbps

    • @FrimleyComputing
      @FrimleyComputing  2 ปีที่แล้ว

      Perhaps you have the CPE605 which look identical but has lower WiFi speeds and 100Mbps port?

  • @yasiyasitorres4923
    @yasiyasitorres4923 ปีที่แล้ว

    Tp link and ubiquity are same frequency?

  • @redpanther999
    @redpanther999 3 หลายเดือนก่อน

    with one transmitter and 2 receivers??

    • @melonmusk3976
      @melonmusk3976 หลายเดือนก่อน

      Both cliente and AP transmit and receive. This guy lacks some technical knowledge.

  • @TylerDouglas100
    @TylerDouglas100 ปีที่แล้ว

    Do I need to buy two seperate CPE710 devices or does the box come with two? Thank you

    • @FrimleyComputing
      @FrimleyComputing  ปีที่แล้ว +1

      You need to buy two, It's one per box. 🙂

    • @TylerDouglas100
      @TylerDouglas100 ปีที่แล้ว +1

      @@FrimleyComputing ok thanks. Is there any application where you could use only one?

    • @TylerDouglas100
      @TylerDouglas100 ปีที่แล้ว +1

      @@FrimleyComputing Is it possible to tx the wifi signal with one CPE710 and rx with an EAP225? Or do I still need 2 x CPE710?

    • @garry2416
      @garry2416 ปีที่แล้ว +1

      @@TylerDouglas100 I was thinking along the same lines but in reverse with an EAP 225 for TX and CPE 710 for RX. In my case for a short 30 metre application of a garden office with an EAP225 already in place and sufficent for outdoor applications. @FrimleyComputing Can CPE710 RX from the EAP 225?

    • @TylerDouglas100
      @TylerDouglas100 ปีที่แล้ว +1

      @@garry2416 I assume it can be done but would like someone with more XP than me to confirm it.

  • @dani02091987
    @dani02091987 ปีที่แล้ว

    Hi there. Cool video and informative.
    For example can i have one CPE in TX mode and two or more connecting to this unit in RX mode if they are all relatively in the line of sight of it the AP?

    • @malkeetsingh412
      @malkeetsingh412 ปีที่แล้ว

      Yes you can configure then with one AP.

  • @jawadmnt
    @jawadmnt ปีที่แล้ว

    Why does it not appear on phones?

  • @dhiyabalshabibi8057
    @dhiyabalshabibi8057 ปีที่แล้ว

    I cant see my cpe710 AP WIFI in my phone

  • @noobparatha7429
    @noobparatha7429 ปีที่แล้ว

    I have one question.
    Does anybody know if we can use it during internet ban?

    • @Geoff247
      @Geoff247 ปีที่แล้ว

      You would be able to use it as an internal link between your buildings, regardless whether Broadband is running or not

  • @royalsingh
    @royalsingh ปีที่แล้ว

    Thanks

  • @adibalbukhity139
    @adibalbukhity139 4 หลายเดือนก่อน

    Dear sir can you show me how to connect 3 antena greetings to you and stay safe

  • @aynutzu87
    @aynutzu87 ปีที่แล้ว

    Hi poe name ? Thnx

  • @maximemaxime3073
    @maximemaxime3073 ปีที่แล้ว

    Merci :)

  • @melonmusk3976
    @melonmusk3976 หลายเดือนก่อน

    Nice unshielded Cat5e PoE cable in violation of warranty!

  • @DardaniaLion
    @DardaniaLion ปีที่แล้ว +1

    I don’t know why but my unit keeps blocking. I seriously think tp link is a scam company. It’s slow and everything is as if we are in 2000. I thought to make use of this antenna but it was not possible. I had to unplug it many times from the power so I could get to the settings and when I did it just kept blocking or hanging. What on earth is this device that it can’t do what it was made for.

  • @PriyaKumari002
    @PriyaKumari002 หลายเดือนก่อน

    Same setting ap to client point to point tp link CPE 610 DEAR SIR

  • @fengdeng1982
    @fengdeng1982 ปีที่แล้ว

    thanks.