Nissan Navara engine noise

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ต.ค. 2024
  • 2013 D22 engine noise
    YD25DDTi
    Turned out to be bad bearings in the idler pulleys (3 of them). After replacing them it is now running quietly!

ความคิดเห็น • 45

  • @markpotrus8642
    @markpotrus8642 6 ปีที่แล้ว +4

    I have Navara D22 2012 exactly same problem I have first start in the morning does that noise take 2 to 3 minutes but after that everything goes normal I find out that one of the diesel injectors it wasn't working well I took all off them and clean them that noise it's gone I don't have it anymore

    • @markpotrus8642
      @markpotrus8642 6 ปีที่แล้ว

      If you have any problem with the timing or the chain or the tension you can tell the idling for the engine I'll be going up and down you can notice that form the RPM it's not settle well be 950 to 1200 up and down

  • @seanod4716
    @seanod4716 7 ปีที่แล้ว +4

    had the similar noise on 2010 d22... turned out to be the belts.

    • @topnotchactivity9325
      @topnotchactivity9325 3 ปีที่แล้ว

      same here so far. noise hasnt come back

    • @jasonhartup1452
      @jasonhartup1452 3 ปีที่แล้ว

      What do use mean by the belts

    • @XXB4XX
      @XXB4XX 2 ปีที่แล้ว

      Drive belts. Like alternator, power steering etc

  • @petermonks4887
    @petermonks4887 7 ปีที่แล้ว

    once again peter here i have just had a new timing chain put in my 4x4 top an bottom pluse new belts as well trying to work out what the whisling is thanks again peter

    • @nathanreid2974
      @nathanreid2974 2 ปีที่แล้ว

      big end bairing or idle pully

  • @iwasborndogiwasborndog9721
    @iwasborndogiwasborndog9721 7 ปีที่แล้ว +2

    you have to replace a tensioner on the upper chain ,is about 65euros

    • @IOTechnology155
      @IOTechnology155  6 ปีที่แล้ว

      I did that and it made no difference in this case

    • @adiadrian1758
      @adiadrian1758 3 ปีที่แล้ว

      @@IOTechnology155 and finally what was the problem ??? The chain ???

    • @nathanreid2974
      @nathanreid2974 2 ปีที่แล้ว

      @@adiadrian1758 big end bairing

    • @emmanuelthill6452
      @emmanuelthill6452 ปีที่แล้ว +1

      ​@@nathanreid2974 i have the similar noise andwonndering what it coulld be just the whining nt the rattelling.

    • @nathanreid2974
      @nathanreid2974 ปีที่แล้ว

      @@emmanuelthill6452 I think the wining is a natrual thing.
      See other videos, particularly the d22 engine sound, done by a youtube channel called Diesel Engines.

  • @FullStrengthBeer
    @FullStrengthBeer 5 ปีที่แล้ว

    Had the exact same problem. Sounds really bad. Its just your drive belts NOTHING serious. If you want test/check just poor a bit of water onto the belts. If it goes quiet... problem solve

  • @marclosch1755
    @marclosch1755 7 วันที่ผ่านมา

    Dual mass flywheel

  • @ShivaSingh-we7bs
    @ShivaSingh-we7bs 4 ปีที่แล้ว +1

    Was this noise about the clicking sound you getting??

    • @nathanreid2974
      @nathanreid2974 2 ปีที่แล้ว

      yep, big end bairing or idle pully

  • @0Joshua026
    @0Joshua026 6 ปีที่แล้ว +2

    Tensioner of the upper chain on the engine. This chains tend to die pretty fast they are small for the torque on this engine. Dont run the car on that state

    • @IOTechnology155
      @IOTechnology155  6 ปีที่แล้ว +1

      nope, i replaced that and it was not the tensioner, it was the belt idler pulley bearings

    • @nathanreid2974
      @nathanreid2974 2 ปีที่แล้ว

      @@IOTechnology155 it did sound like big end bairing damage

  • @patricioguerrero894
    @patricioguerrero894 6 ปีที่แล้ว

    CHANGES STRAPS OR SHUTTERS AND APPLIES MOISTURIZER, "SOUNDS SO THAT THE STRIPS ARE ALREADY CRYSTALLIZED"

  • @MrDazzatron69
    @MrDazzatron69 8 ปีที่แล้ว +1

    can I ask how much it set you back to get fixed as mine need doing and would like to know what I'm in for money wise. Thanks

    • @IOTechnology155
      @IOTechnology155  8 ปีที่แล้ว +2

      quality bearings were $10 each, and about 1-2 hr labour, but i did it all myself

    • @MrDazzatron69
      @MrDazzatron69 8 ปีที่แล้ว

      ah ok thanks for the reply. I'm not that mechanically minded to do it myself

  • @petermonks4887
    @petermonks4887 7 ปีที่แล้ว

    hi io technology i have a nissan navara d22 2010 model i have that whisling sound that i hear when u hold the revs up is the the idler pulleys makin that sound your in put would be much appreciative thanks peter in australia thanks mate

  • @sureshdeonarine4540
    @sureshdeonarine4540 6 ปีที่แล้ว

    I have a 2015 np300 Navarra when I starts on mornings I here a knocking sound coming from the engine when the engine heats up its stops, it's a really bad sound and smokes white in the morning at its first start.

    • @IOTechnology155
      @IOTechnology155  6 ปีที่แล้ว

      no idea sorry, this engine is not the same as yours

    • @Mabeylater293
      @Mabeylater293 6 ปีที่แล้ว

      R
      U bought a Renault, what did u expect?

  • @justingowley2223
    @justingowley2223 8 ปีที่แล้ว +1

    like to know what you found. i too have a similar noise that goes away after about 1 min

    • @IOTechnology155
      @IOTechnology155  8 ปีที่แล้ว

      if you read the video description, i mentioned that it turned out to be the 3 idler bearings, best of luck!

    • @justingowley2223
      @justingowley2223 8 ปีที่แล้ว +2

      Cool. I have replaced the AC & PS idler pulley bearings thinking it was those. Will be doing tbe Alt ones tomorrow. Was starting to think i had to go internal

    • @trentlovell6101
      @trentlovell6101 5 ปีที่แล้ว +1

      mine is exactly the same cheers

    • @nathanreid2974
      @nathanreid2974 2 ปีที่แล้ว

      @@justingowley2223 may have to, i think it is big end

    • @petebusch7614
      @petebusch7614 2 ปีที่แล้ว

      same

  • @sureshdeonarine4540
    @sureshdeonarine4540 6 ปีที่แล้ว +1

    What can it be? Today I did a fuel flush, engine oil change, fuel filter change still same problem

  • @markparnis9952
    @markparnis9952 6 ปีที่แล้ว +2

    Timing chain tensioner is gone

  • @leeviteivonen3363
    @leeviteivonen3363 3 ปีที่แล้ว

    Timing chain is shite. Time for upgrade!

    • @sandgroperbrewing2399
      @sandgroperbrewing2399 ปีที่แล้ว

      That is what mechanical workshop will say to make $$$$
      All it is the belt pulley which cost about $170.00

  • @w8knb8kchop88
    @w8knb8kchop88 5 ปีที่แล้ว +1

    Trimming chain 100%

  • @xbox1gorilla253
    @xbox1gorilla253 6 ปีที่แล้ว

    Sound like timing chain