I saw a vid from Blue Bulldog Plumbing, I do it every time now when fitting a new boiler, cut a tee into the flow near the boiler with a drain off in it. Finish your install, run a hose out from your flow drain off and isolate the flow on the boiler. You can now mains flush every rad and the pipework to it by closing a valve on each rad leaving one open at a time, works really well. Hope that makes sense 🤣
Top class Captain, what they charge for a power flush isn't worth the money. Your set up will do a great job. Brilliant videos, keep them coming. Peace and goodwill.
Flip the middle tee 180 degrees so it going up the way in your pic then you can put your dump bar straight across with a central drain leg. Good bit of kit, get it mounted on some scrap ply or mermaid board with a few munsons 👌
@@charliewillis8527 😂😂 I do mate but the states I come home in… makes going the pub a challenge at home and I don’t want to end up With a black eye like someone we know 😂😂
@@Heatking right I’ve done a video in my garage. I wanted to do a video with it plumbed in to my heating system or at least flushing a radiator. I will upload my video and post a link….🤞🏼
Dare you to press like? Bet you don’t.. ❤
I saw a vid from Blue Bulldog Plumbing, I do it every time now when fitting a new boiler, cut a tee into the flow near the boiler with a drain off in it. Finish your install, run a hose out from your flow drain off and isolate the flow on the boiler. You can now mains flush every rad and the pipework to it by closing a valve on each rad leaving one open at a time, works really well. Hope that makes sense 🤣
Yeh mate this is what I used to do 🙏🏽
Made something very similar about 15 years ago when flushing became a thing. Found it was better screwed to a plywood board to stop nuts coming loose.
Good shout that Stuart! Thanks mate!
QA tap rev kit 6:04
I like that mate 👌🏾 the amendments made sense now. Plus that dump doubles up as a carry handle for it too 😂
Haha cheers mate.
Top class Captain, what they charge for a power flush isn't worth the money. Your set up will do a great job. Brilliant videos, keep them coming. Peace and goodwill.
Thank you Martin! Cheers for the support mate! Take care brother
Thanks
You are too kind sir! Thank you!
@@Heatking keep up the good work 👌🤓
@@AlexRocks24-7 cheers brother!!
great vid mate been using my thorough flush all the time now yours works the same i just couldnt be asked putting it together
Cheers David, I think the thorough flush is a great little invention and much more professional than mine but thank you for the positive feedback!
Cool contraption there bro. Also I just sliced my thumb too with a box cutter lol. Needed to paint my girls room
Ouch! The smaller cuts always seem to be the worst! Haha thanks for the support as always. Hope you got the room done 🙏🏽
Am gna give this a go thanks mate for taking the time to make this video
Welcome mate. Let me know how it goes!
@@Heatking will do mate
Flip the middle tee 180 degrees so it going up the way in your pic then you can put your dump bar straight across with a central drain leg. Good bit of kit, get it mounted on some scrap ply or mermaid board with a few munsons 👌
Good ideas that Tom! Thank you!
Excellent mods. 👍👍👍
Thank you Paul 🙏🏽🙏🏽
And you’ve now got a handy dandy carry handle 😀
😂😂😂 that’s best bit ♥️😂
Haha I said the same 😂
Nice jig, I've got a mains flush set-up I've had for years, it looks a little different to yours mate, good work
Cheers mate. Yeh there’s a few knocking about, wish this was my original idea 😂😂😂
Great! Mine is essentially the same config (not put checkvalve on though 😮) but yours is nicer looking!
Cheers mate, I bet yours isn’t that bad looking lol.
You need to make more time for the pub Dan
@@charliewillis8527 😂😂 I do mate but the states I come home in… makes going the pub a challenge at home and I don’t want to end up
With a black eye like someone we know 😂😂
@@Heatking yes Luke is still learning lol iam off to football today its been a hard week been really busy this week but it's still slow generally
@@charliewillis8527 I’m just now busy with servicing to be honest but you soon get through them :(
If mains flushing open vent do you cap the vent and isolate the cold feed
Yes mate I do,
I’ve told you about mine on your last video. I really must do a video of mine.
Please do buddy 🙏🏽🙏🏽
@@Heatking right I’ve done a video in my garage. I wanted to do a video with it plumbed in to my heating system or at least flushing a radiator. I will upload my video and post a link….🤞🏼
th-cam.com/video/1GcUV6BBQWE/w-d-xo.htmlsi=RmMILwx24dO89DFg
@@Heatking th-cam.com/video/1GcUV6BBQWE/w-d-xo.htmlsi=RmMILwx24dO89DFg
Hi could you send me a list of the fittings for the first video please
Do you have me on Instagram mate?
Yes
@@robertdavies4873 drop me a message and I’ll send you the list
🤘😎🤘
Good Evening sir!
@@Heatking Evening Buddy 👍👍
@@SuperWayneyb sorry to hear about the car, what was wrong with it?
My homemade flusher:
th-cam.com/video/1GcUV6BBQWE/w-d-xo.htmlsi=RmMILwx24dO89DFg
Nowt wrong with the casual look :) look fwd to version 3/MkIII
Haha I’m hoping there isn’t another version 😂😂😂
Worcester flush 3000 🤣
😂😂😂😂