Also doing my 14" right now wondering how you did the headlights, also wondering if you have pictures of the rad support and how you mounted intercooler and accessories
@@rosales75904 this was for a client ! And as long as you have the budget for it I’d be willing to do another one ☝️, I’m in FortWorth TX. My instagram is 4everonjackstands if you want to send a message! Thanks!
daaaamn this dually is so clean. i have a parts truck 2020 and i want to do the same swap on mine. its a 2015. what all has to be done. any big modifications?
Thanks for watching, consider looking at a diagram as all are different but I utilized a momentary switch. There’s 2 wires that if you touch together they will open the gate. I don’t remember what colors
@@dfwbabydriver for sure 🤙🏻 just one question sense it's something youve done could the front clip of the 5th gen be put on the 4th gen and body worked to make fit with 4th gen aprons and radiator support ect or you truly have too replace everything to make it work ?
I did the same thing and my fkn fan keeps on hitting my radiator this is the 5th fkn radiator I run thru in a fkn month im trynna see who else’s has the same problem I hate swaps
Customer had slid axle (leaf spring mount points) forward and then cut the frame, then added some square tube at the right height welded to frame so bed sits on top of it level.
![[UNCUT] "บอสณวัฒน์" แฉ! แหล่งซุกเงินแก๊งบอส ขยันผิดที่ไม่กี่ปีก็เข้าคุก l คนดังนั่งเคลียร์ l17ต.ค.67](http://i.ytimg.com/vi/BL56qIfXYZM/mqdefault.jpg)
Let me know what y’all think! There’s a few good tips on the later half of the video, watch till the end thanks !
Looks great . Im doing my truck right now . Would be nice if you can help me out or do a video on the headlight wiring . Thanks
Also doing my 14" right now wondering how you did the headlights, also wondering if you have pictures of the rad support and how you mounted intercooler and accessories
@kody123454321 did you finish your project?
@tommyle7512 did you finish the lights?
Bro it came out so nice! My dream truck is a dually but a single cab dually is just next level🔥🔥
Thanks!! I think so too !
so the 2019+ 1500 parts will work on 4th gen. ive been seeing only 2500 works
Sadly no you gotta weld and cut the fenders and I believe more
Yes indeed bro big thanks for the info. I'm looking to do my 2002 to a 2018 front end swap
So did you drill the spot welds and remove the apron horns or did you cut and butt weld them?
Drill spot welds! The new ones line right up to most of the old spot welds
I need mine done. Great job!
I have a feeling y’all are gonna like the next project too! I just need to decide which one to start on 😆
Do you do these swaps for clients? Interested in this conversion.
@@rosales75904 this was for a client ! And as long as you have the budget for it I’d be willing to do another one ☝️, I’m in FortWorth TX. My instagram is 4everonjackstands if you want to send a message! Thanks!
I live in Dallas, I can’t find your insta anymore
Are you still doing 4th to 5th gen Ram swaps? How much. Let me know where you’re located and what kind of window do you have to start. Thanks
no sirrr, but if you want to watch me build a corvette full racecar stick around! thanks for watching
How did you put the 5th gen tail gate ?
daaaamn this dually is so clean. i have a parts truck 2020 and i want to do the same swap on mine. its a 2015. what all has to be done. any big modifications?
I have another video on my channel showing a bit more, maybe that’ll help
thanks i will definately be checking it out.
Did u add resisters to any of the wires for the headlights. I'm doing one now just when the truck is on all lights start to trip
How is your project going, do you have the diagram for the lights?
where you located? and what would be eta on getting this done by you or did you guys take it to a shop?
Dallas Tx, I did it myself at my shop. HMU on Insta CesarDrifts is my new one. With parts ready this only takes me 2 weeks max
Can you tell me what pigtail harness you are using for those headlights?
Oem from dealer, have to cut and adapt to old harness
Nice job !! How much did you spent ?
Thanks!! Friends truck he spent a few thousand! Half used parts half dealer and the rest time and labor
How did you get it done? Did you use all original radiator support?
Original radiator support center with new radiator support outer pieces
Subscriber 411 my friend big 👍🏾👍🏾👍🏾👍🏾 looks great
How you wire the lights ? Having issue with mine
What’s the issue
@@dfwbabydriver I got I was looking at my schematic with the plug facing me
bro did you have pictures how radiator looks
How can I get in touch in Texas too
How did u wire your tail gate ?
Thanks for watching, consider looking at a diagram as all are different but I utilized a momentary switch. There’s 2 wires that if you touch together they will open the gate. I don’t remember what colors
How did u do the reverse camera bro
Good shit thanks man
How much would it be to do it on mine 2018 ? I'm in Dallas tx
sorry i'm not doing conversions anymore, i hope yall still stick around as the corvette drift/race build is starting!
@@dfwbabydriver for sure 🤙🏻 just one question sense it's something youve done could the front clip of the 5th gen be put on the 4th gen and body worked to make fit with 4th gen aprons and radiator support ect or you truly have too replace everything to make it work ?
@@bigchiefl1285 have to replace everything no way around it because they slope down and in (a different way)
How can I get in touch to get mine done I have a 2012 Ram 2500 awesome job!
Sick
Can I do this in 3rd gen
What you charge to do one
Can find on ig 4everonjackstands send me a message, thanks for watching !
Can you update your instagram handle? I’d like to get in touch but can’t find you on instagram.
Hey man reaching out to you from Toronto do you Think this is possible on a 4th gen crew quad truck
Yea i cant find you on instagram
@@faresalyahya7871 making a new one soon, working on a lot behind the scenes. Thanks for being patient guys ! I’ll update y’all soon
Sell it to me 😫
any other social media to get in contact with you? wanting to get this done to my ram, I have most parts ready to go.
I did the same thing and my fkn fan keeps on hitting my radiator this is the 5th fkn radiator I run thru in a fkn month im trynna see who else’s has the same problem I hate swaps
What your ig bro?
dfwbabydriver should stay that way from now on! thanks for watching
What’s your IG?
dfwbabydriver should stay that way now
@@dfwbabydriver i followed you and sent a message
What did you have to do to fit that mega cab bed?
Customer had slid axle (leaf spring mount points) forward and then cut the frame, then added some square tube at the right height welded to frame so bed sits on top of it level.