i bought this case with a 7800x3d- ASUS ROG-B650E-E- MSI RTX 4080 SUPER trio-with fans and cpu cooler in the video. I have to mount it sunday.I cant not wait
Great vid thanks...I have just bought this case and the same fans and aio cooler but I bought all reverse case fans...Hope that will work...Sure on another review that's what they did...
Hi, first of all, great video! I'm thinking of setting up something similar but using ryzen 5 7600, could you tell me if it picks up a lot of dust with that fan configuration and for not having dust filter? Greetings from Spain!!!
no dust issue since we finished building it, but then again we run it in isolated office room. You will run into dust issues because there are no filters unless your environment is relatively dust free
don't fully understand what you are asking, but we are not running any SSDs in this build. only 1 m.2. The back panel that swings out can fit some SSDs.
Thank you for pointing out the air cooling how you have one side reversed and the top and back regular I was confused about that. I finally got my case, I wanted to ask if you can build mine for me I don’t know how to build a pc. Also the air up top is sucking in and the one at the bottom and the side is blowing air out right ?
@@projectsgaming2020 maybe I could ship it to you I’m located in Washington state. I don’t want to pay bestbuy to build mine. And the store over here that I like does build them for 20$ went out of business
Thanks for this video. How did you figure out that having 4 reversed fans at the front gives best airflow? I don't know how many regular and reversed fans I should buy lol
For the AIO, that's 3 regular fans For the rest of the case fans: 1 regular 4 reverse we asked our store rep who I presumed asked a phantek rep for optimal fan setup. this is what the store rep suggested
I wondered this too cause I'll be using the nv9, and i thought it would be best to intake the colder air at the motherboard and exhaust the warm air away from it. But I learned one of the reasons is warm air rises to the top so it makes more sense to do it this way.
Phantek sells an addon NV5 premium led kit which we didn't get www.phanteks.com/NV5-LED-Kit.html Not all the fans are daisy chained together, can't recall the exact method we use since its been a while but I if I recall correctly, we group them into two groups of daisy chain. They are all plug directly to the motherboard since we used a full size atx motherboard
@@George-um2vc this is the reason why I asked how loud is the pump for the Glacier One 360D30. Is is better or worse than Asetek pumps when noise is considered? I think performance wise (temperatures) they are similar.
Can you do a build with a Ryzen 7900x and rtx 3080? I want this case I love phantex I built my first pc with them. But I am still not good at building them.
@@projectsgaming2020thank you for the response I am going to buy this case today, I have the cpu ryzen 7900x I am so glad you should the fans the push pull configuration and explain what fans do what I was so confused on that.
@@HotSizzleTV_ basically you want to pull the air in from the bottom and back panel and exhaust the air our from the top and the fan on the near the I/O
i bought this case with a 7800x3d- ASUS ROG-B650E-E- MSI RTX 4080 SUPER trio-with fans and cpu cooler in the video. I have to mount it sunday.I cant not wait
Thanks for the insight, I was curious about Phanteks...great vid!
I agree. Doing my build with an all white build soon. Gonna put my build on you tube as well. Did my research and it's a solid case.
Thanks for showing us how to cable manage where plugins go and how to set up the RGB you did a great job
Huge fan of the Phanteks products
extremely useful!!! thanks
Nice case but they also should've add the rear door cover like the nv7 to hide the power cable as well
its an $85 case, NV7 is $185, how much do you want a door on the back
@@MikeZak101 just saying my friend
this report is very detailed!!!
This video is so useful!!!!
Great vid thanks...I have just bought this case and the same fans and aio cooler but I bought all reverse case fans...Hope that will work...Sure on another review that's what they did...
if you bought all reverse fans then all the fans are pulling air in and nothing is going out?
@@projectsgaming2020 I need to get one regular ordered, thanks.
Nice video :)
Best case for the price on the market
Lancool 216 has entered the chat
Great vid, I am looking to build a similar pc. How did you sync all the rgb on the fans, the pump and the led strip of the case?
since its an ATX motherboard, there should be enough RGB headers for all the fans
Hey bro, what rgb controller did you use to make the blue / purple rgb color?
Thanks ❤
no controller. all the fans plug directly to the motherboard. Used Asus motherboard software to control the RGB of the fans
Hi, first of all, great video! I'm thinking of setting up something similar but using ryzen 5 7600, could you tell me if it picks up a lot of dust with that fan configuration and for not having dust filter?
Greetings from Spain!!!
no dust issue since we finished building it, but then again we run it in isolated office room.
You will run into dust issues because there are no filters unless your environment is relatively dust free
Sorry for asking such a dumb question but how did you plug in so many fans? Did you use a hub? For power and RGB?
The motherboard we used had enough fan and rgb pins where we didn't need a hub
why did you press the SSD drive with the radiator if you have a special mounting there?
don't fully understand what you are asking, but we are not running any SSDs in this build. only 1 m.2. The back panel that swings out can fit some SSDs.
@@projectsgaming2020 it is still an SSD drive, only in the M format and with a PCIe interface
@@projectsgaming2020 you have a special protection for mounting the disk, but you didn't use it, you just put on a cover with a thermal pad.
@@Aquantia-xu4qw are you referring to th-cam.com/video/XADektDY3Hs/w-d-xo.html the square pad? If so, I missed it. That process is a first for me.
i forgot to lock it with the grey rotating thingy. good catch
6:04 does it matter i put it bottom left instead? figured it would hide the cable better
doesn't matter. I ran it that way because of my cooler orientation in the case so that cable is closer to the back of the case
Thank you for pointing out the air cooling how you have one side reversed and the top and back regular I was confused about that. I finally got my case, I wanted to ask if you can build mine for me I don’t know how to build a pc. Also the air up top is sucking in and the one at the bottom and the side is blowing air out right ?
How would that work? I don't believe we are in the same city.
@@projectsgaming2020 maybe I could ship it to you I’m located in Washington state. I don’t want to pay bestbuy to build mine. And the store over here that I like does build them for 20$ went out of business
@@HotSizzleTV_ Best to find someone within your local area. We are nowhere close to you. Shipping alone would make it unfeasible.
Thanks for this video. How did you figure out that having 4 reversed fans at the front gives best airflow? I don't know how many regular and reversed fans I should buy lol
For the AIO, that's 3 regular fans
For the rest of the case fans:
1 regular
4 reverse
we asked our store rep who I presumed asked a phantek rep for optimal fan setup. this is what the store rep suggested
I wondered this too cause I'll be using the nv9, and i thought it would be best to intake the colder air at the motherboard and exhaust the warm air away from it. But I learned one of the reasons is warm air rises to the top so it makes more sense to do it this way.
I watch for the handsome hosts
Would reverse fans be intake fans the regular be exhaust? Sorry I am new to pcs and very confused
yes
Do you have CPU temps with the phanteks glacier one 360D30 ?
55 c or 131 F. Running Cinebench multi core test 5 mins in
Is Ryzen 9 7800x3d good pair with rtx 4080
If u have good *Rtx* recomendations please tell me
We currently on the intel bandwagon at the moment so haven't really looked into AMD offerings in a while
didnt catch what you said about not having the case rgb strip working? are your rgb fans daisy chained and onto motherboard ?
Phantek sells an addon NV5 premium led kit which we didn't get
www.phanteks.com/NV5-LED-Kit.html
Not all the fans are daisy chained together, can't recall the exact method we use since its been a while but I if I recall correctly, we group them into two groups of daisy chain. They are all plug directly to the motherboard since we used a full size atx motherboard
just asking, is ur new mouse the sleeper mouse in white good? Just asking im getting it for christmas when i get it, i will make a review.
its solid, good value
ty@@projectsgaming2020
9:00 is 4 year warranty, normal in Singapore?
best to contact gigabyte Singapore to get the most updated info, don't want to give you wrong info since we haven't ever claim warranty on our GPUs
How is the pump noise for Glacier One D30?
the fan noise is louder than the pump noise
@@projectsgaming2020Thx! Fans are not the problem, I will replace them with Noctua's. Hopefully the pump is not audible at medium load.
@@yanisyukams6680from what I understand they use a different pump now on all Glacier AIOs or at least some of them, be good to double check though.
@@George-um2vc this is the reason why I asked how loud is the pump for the Glacier One 360D30. Is is better or worse than Asetek pumps when noise is considered? I think performance wise (temperatures) they are similar.
Can you do a build with a Ryzen 7900x and rtx 3080? I want this case I love phantex I built my first pc with them. But I am still not good at building them.
ryzen would be tough since we basically jump back on the intel bandwagon with recent builds
@@projectsgaming2020thank you for the response I am going to buy this case today, I have the cpu ryzen 7900x I am so glad you should the fans the push pull configuration and explain what fans do what I was so confused on that.
@@HotSizzleTV_ basically you want to pull the air in from the bottom and back panel and exhaust the air our from the top and the fan on the near the I/O
gigaby ???
?
you went with a black build but your using a white keyboard and mouse i would have gone with a white build if im using a white mouse and keyboard
not the final resting spot for the phanteks. That was a temporary setup for filming purposes
Gigaby- LOL
the only big issue with this case is the mounting for ssd/hdds..very poorly designed almost an afterthought