Thanks for your service dude. I always knew you guys were at a minimum prior military. I was forced to retire at 18 years in 2020, and bought my 17’ FXDLS new with a surprise VA backpay check that showed up on my birthday haha. Are you at north island? I’m actually riding my FXDLS alone from Sacramento to S.D. In the next month or so. My brother, who enlisted the same day as I did, and is now a C-5 pilot, just bought a 22’ LRS in gunmetal grey. He’s riding there to meet me from Fort Worth so we can spread my dads ashes in the bay off of north island. He obviously was prior military, decorated cobra pilot in Vietnam plus 20 additional years, and he grew up there as a kid. After that we’re cruising the coast back up to S.F. and home from there. Good to see you guys are back. I have watched your videos since the first week I had my bike. I have a lot of the same mods, and actually just finished swapping the lifters and pushrods.
Hey man I’m actually in Miramar. Sorry to hear about your dad. Hope you guys have a safe trip and Thankyou guys for all your service. Hope the videos helped u out a bit
Looks fuego. Got a 16 FXDLS 585 S&S cams, oil pump, cam plate, HPi 62 mm throttle body galfers front and rear, Legend front suspension Arnott rear Air suspension, speed kings chain kit, Barnet clutch, darkhorse manOwar compensator. I'm planning to link up with a buddy in Diego, I'll link up witcha Devil
You are gonna have to ride down to Tacos el gordo on east h street in chill vista. That was the spot when I was stationed there. Enjoy your time in SoCal brotha 🤝
Jow man nice video! great looking FXDLS! Will be in San Diego beginning of March...first time in California (I am from the Netherlands) ....curious how the riding will be over there! Cheers!
Just fitted some 14inch shocks and had to remove the rear passenger pegs..they were sitting right on the exhaust (Vance and Hines upsweep) have you had any issues with the foot peg hitting the exhaust muffler..
My current exhaust no but some exhausts will have clearances issues cause the swing arm angle after the tall shocks also check your primary if u have a chain it’s probably contacting
You condition your seat… I have a Lucky Dave’s I bought used from a friend and it started cracking between the stitches. Also what happened to the fairing you had on the LS
@@dynademos brand new isolators.. I’ve asked around in some Facebook Dyna groups and they say same thing and now that I look the rear tire looks to be sitting closer to on side than the other? So i would say probably not aligned
@@ethanwoods329 vibration could be so many things it could be as simple as the stiffer isolators are just making you notice the vibration of the bike more cause it’s sending it up through your bars are u getting a wobble at all?
@@ethanwoods329 oh man could be so many things if u have spokes check the spokes could be loose. Neck bearings get overlooked a lot. I’ve heard of drive train alignments throwing that off as well honestly is just be throwing things out but I’d start small and work your way up to the bigger things till she rides like a dream incorrect suspension can cause it
Awesome, thank you for feedback, keep up the videos man, love em. Just a thought, but would love to see “how to” videos on removing wheels or brake rotors/pads. I got the same bike as you and there’s not that many “how to” videos with the Dyna low rider s besides your channel. Either way, love the channel man
@@justout27 for that specifically dynas 06-17 were all almost identical so u can get by removing a wheel and brakes with some of these other guys videos we try to do videos that aren’t already out there. But u can always hit us up if u run into issue 🤘🏽
Hey Lego, Great update and thanks for all the video’s ya’ll put out. I love the new bar and riser setup. Can you confirm which set of Big Al’s bars you have? They make a “low low bar” with 2.5” rise that is 28” wide and a “low bar” with 3.5” rise and is 30” wide. I am leaning toward the low low bar because of the closer hand grip but I am worried that is will be too low with a 6” riser (8.5” total rise). Let me know you thoughts on the width of your hand position as well with the new setup if you don’t mind…
Hey bro I’m 5’8” I went with the low low bars 8.5” rise overall with my setup and big als risers it’s comfortable for me and I can ride aggressive in the canyon with them
I got a dyna street bob, plain paint, no graphics just one color, longer shocks mono tube kit in fork, little fairing. From ENC and most HD dealers just ignore me but I'm over it
Just so everyone knows. The headlights that moonsmc sells are the exact same ones from Amazon. They just laser etch their logo on them and sell them for double the price. Someone on the inside gave me that info.
Thanks for your service dude. I always knew you guys were at a minimum prior military. I was forced to retire at 18 years in 2020, and bought my 17’ FXDLS new with a surprise VA backpay check that showed up on my birthday haha. Are you at north island? I’m actually riding my FXDLS alone from Sacramento to S.D. In the next month or so. My brother, who enlisted the same day as I did, and is now a C-5 pilot, just bought a 22’ LRS in gunmetal grey. He’s riding there to meet me from Fort Worth so we can spread my dads ashes in the bay off of north island. He obviously was prior military, decorated cobra pilot in Vietnam plus 20 additional years, and he grew up there as a kid. After that we’re cruising the coast back up to S.F. and home from there. Good to see you guys are back. I have watched your videos since the first week I had my bike. I have a lot of the same mods, and actually just finished swapping the lifters and pushrods.
Hey man I’m actually in Miramar. Sorry to hear about your dad. Hope you guys have a safe trip and Thankyou guys for all your service. Hope the videos helped u out a bit
Oh and I have just purchased and 09 Dyna Super Glide that has low miles and a 96" and your channel is full of great tips and mods.
Heck yeah bro send us a pic !
@GatorMan Ruth I have the exact same bike. Just completed my club style build!
@@andrewgawlik6452 let’s see it send us a pic on insta!
Same here, 09 FXDX in bound 🤘🏻
@@gregorysoto2513 heck yeah 🤘🏽
Nice job Lego. I like it. Also thank you for volunteering to protect our nation, from an Army vet
Thankyou and Thankyou for your service also!
That's one BAD ASS Dyna. Well done 🇺🇸👍😎👍🇺🇸
Thanks bro!
Looks fuego. Got a 16 FXDLS 585 S&S cams, oil pump, cam plate, HPi 62 mm throttle body galfers front and rear, Legend front suspension Arnott rear Air suspension, speed kings chain kit, Barnet clutch, darkhorse manOwar compensator. I'm planning to link up with a buddy in Diego, I'll link up witcha Devil
You are gonna have to ride down to Tacos el gordo on east h street in chill vista. That was the spot when I was stationed there. Enjoy your time in SoCal brotha 🤝
Done it ! Love it man
Jow man nice video! great looking FXDLS! Will be in San Diego beginning of March...first time in California (I am from the Netherlands) ....curious how the riding will be over there! Cheers!
It’s awesome if u want me to show u around hit me up 👍🏽
@@dynademos joow cool man thanks! Lets keep in thouch. Probably gonna rent a Harley @eaglerider when I am in San Diego...thats the plan! 🤘
Excellent job Lego, keep the vids coming!
Will do!
TheDyna S is looking proper man! I've been eyeing down that MoonsMC head light for awhile and that chain kit looks 👌
Thanks dude it’s super bright I don’t think u can go wrong with it
Had the same thing finally happen with my twobros, replaced it with a fab28
Yeah dog didn’t happen forever then boom back to back and the customer service was whack honestly how u gunna sell a pipe with a known issue
Got her looking good. You running an aftermarket cam? Probably the best mod outside of suspension I did to my fxdls. Really woke that 110 up.
I’m not dog stock stock 20k still running like a champ 😬
What Cams did you go with for your FXDLS @aaron and Lego?
@@Ohboy22 I’m running the woods 777. Really like them. Stock heads and compression.
Damn 14.5 for a fxdls with 3k you got a steal. I just bought one with 3k for 18.5 with most of the same mods you have and thought I got a fair deal.
I bought it on the east coast and the dude had a dodge demon and another bike i don’t think he cared much haha
@@dynademos makes sense.
I put the SE 110 tire shredder kit on my 2011 street bob.....(106hp 122tq) worth every bit of 5k. Curious what your low rider makes in comparison.
Stock I think these are maybe like 80-90🤔 or maybe with a pipe,tune, air filter
Just fitted some 14inch shocks and had to remove the rear passenger pegs..they were sitting right on the exhaust (Vance and Hines upsweep) have you had any issues with the foot peg hitting the exhaust muffler..
My current exhaust no but some exhausts will have clearances issues cause the swing arm angle after the tall shocks also check your primary if u have a chain it’s probably contacting
@@dynademos it's belt drive and all good and adjusted...my only question is what exhaust would you choose on the set up you have now..👍🍻
Wish I was still there. I’d love to have gone for a ride
Come back out let’s go rip
@@dynademos haha I’m stationed on the gulf now friend or u know I wouldn’t be anywhere else!
You condition your seat… I have a Lucky Dave’s I bought used from a friend and it started cracking between the stitches. Also what happened to the fairing you had on the LS
Yeah I condition my seats keep that leather fresh also garage stored helps. And got rid of it rocking no fairing
@@dynademos thanks for the quick reply and glad DD is making videos again and thank you for your service
Your out here now? What area?
San Diego! Mission valley
Another solid video! 👍🏾
Thankyou 🙌🏽
Hey boss, just put big bear choppers front mount on my Dyna and was curious if your bike got some vibration after you installed your chopper Hauss?
No boss are your isolators new? Is the drive train aligned?
@@dynademos brand new isolators.. I’ve asked around in some Facebook Dyna groups and they say same thing and now that I look the rear tire looks to be sitting closer to on side than the other? So i would say probably not aligned
@@ethanwoods329 vibration could be so many things it could be as simple as the stiffer isolators are just making you notice the vibration of the bike more cause it’s sending it up through your bars are u getting a wobble at all?
@@dynademos bike has always had bar wobble since I’ve got it but been fine at high speeds
@@ethanwoods329 oh man could be so many things if u have spokes check the spokes could be loose. Neck bearings get overlooked a lot. I’ve heard of drive train alignments throwing that off as well honestly is just be throwing things out but I’d start small and work your way up to the bigger things till she rides like a dream incorrect suspension can cause it
What did you do with the Lucky 13`s? Do you want to sell them?
Sold in 10 seconds
@@dynademos bummer
How many miles you got on it? are you thinking about doing any engine mods?
lil over 20 no plans for engine work till she makes me !
GR8 VIDEO THANKZZZZ FOR SHARING!!!!
Thanks for the support
I saw that you had the commander 3s on there, how have those been holding up? Tryna look for a new set
Have never slipped on them although I usually do not ride in the rain
Also probably have 5k on them atleast no sign of wear dual compound if I remember
Awesome, thank you for feedback, keep up the videos man, love em. Just a thought, but would love to see “how to” videos on removing wheels or brake rotors/pads. I got the same bike as you and there’s not that many “how to” videos with the Dyna low rider s besides your channel. Either way, love the channel man
@@justout27 for that specifically dynas 06-17 were all almost identical so u can get by removing a wheel and brakes with some of these other guys videos we try to do videos that aren’t already out there. But u can always hit us up if u run into issue 🤘🏽
Hey Lego, Great update and thanks for all the video’s ya’ll put out. I love the new bar and riser setup. Can you confirm which set of Big Al’s bars you have? They make a “low low bar” with 2.5” rise that is 28” wide and a “low bar” with 3.5” rise and is 30” wide. I am leaning toward the low low bar because of the closer hand grip but I am worried that is will be too low with a 6” riser (8.5” total rise). Let me know you thoughts on the width of your hand position as well with the new setup if you don’t mind…
Hey bro I’m 5’8” I went with the low low bars 8.5” rise overall with my setup and big als risers it’s comfortable for me and I can ride aggressive in the canyon with them
@@dynademos Thanks for the replay. I love the set up.
Reply*
@@omutt3423 Thankyou I like it feel like I can rip the canyons pretty hard 🤘🏽
How tall are you? Can’t decide whether 13 or 14” shocks for my dyna fxdl im 5’8” and don’t plan to raise the front at all
I’m the same height. 14 in shocks. wear boots and u can flat foot
Where did you get the flush gas cap??
They are HD brand u can get them at a local dealer
What it like with those 14” shocks at your height? I’m about as tall as you and trying to pick a length for the rear of my bike.
If you don’t wear boots u will tip toe or one leg it backing up sucks lol
@@dynademos haha, I bet! Thanks for the reply man, ride safe brother. Love the content and the bike man!
What happened to your fairing?
Took it off I use a detachable windscreen now
Nice bike man. Why'd you drop the fairing?
Just change it up everyone has a tsport
Understand. On the east coast where I'm at they're not nearly as popular
@@PAwader over here they’re everywhere ha
you got it looking good bro
Thanks dog
you stationed in SD
Yessssss
Get a cam bro. Seriously. I got a woods 777 and it makes the stock fxdls feel slow
I’ll think about it don’t think it makes a difference in the canyons 😬
@@dynademos it does. Trust me bro. I’m trying to help my dudes out lol.
@@Bluis5445 I’m just playing dude but I’m not doin any motor work till she makes me
Is the woods 777 a good bolt in cam for a stock 110 motor? What hp/tq does your fxdls make with these cams?
@@a.j.1327 hell yea! Mine makes 124 tq and 105 HP
I got a dyna street bob, plain paint, no graphics just one color, longer shocks mono tube kit in fork, little fairing. From ENC and most HD dealers just ignore me but I'm over it
Those dealers don’t know what’s going on with the Harley scene
Well let's hear that monster dude!
I know I forgot 🤦🏽♂️
Nice B-Slap about the speed bro...lol
What?
@@dynademos when ppl think they can tell how fast they are going..
👍🏻
❤❤❤
What's up, man. I just got stationed at Miramar. Let me know if you're down to ride sometime. Rah.
Ride every weekends hit me up!
@@dynademos whats the best way to get in contact?
@@kcnwea Instagram !
Bruh, that home depot hardware tho ;).
Home Depot u mean Lowe’s 😂
You dont need to see your speed. Just listen to the engine and feel the road.
Just so everyone knows. The headlights that moonsmc sells are the exact same ones from Amazon. They just laser etch their logo on them and sell them for double the price. Someone on the inside gave me that info.
They sell the v2 on Amazon I haven’t seen it 🤔 I’ve came across the v1
Do you got the link or how do I search it?
#frontsuspension
#plust00
Who hell moves the speedo off the tank? That's the reason I wanted a dyna. You should've gotten a sportster 🤣
🤦🏽♂️😂
TBR is well known to be trash exhaust in the sport bike community.. it’s offensive they got into HDs
Yeah the customer service was whack honestly
Poop brown.. ahhaha
Baby poop brown 😬