I have same problem, i followed all your descriptions but can't work😢 I did change Hopper,subhopper,developer! Can't working! This problem can be on mainboards?
@pambisNiBokyo Check for a toner buffer unit jam or something damaged inside Try Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES [Related parts] - Harnesses from the Main Driver PCB to the Buffer Unit 1. Main Driver PCB (UN78/J115) to Relay Connector (21P) (Unit of replacement: CABLE, MAIN DRIVER, REAR UPPER) 2. Relay Harness (21P) (Unit of replacement: CABLE, RELAY, FRONT) 3. Relay Connector (21P) to Buffer Unit (J3124) (Unit of replacement: CABLE, MAIN DRIVER, FRONT) - Harness between the Buffer Unit (J3124) and the Magnet Roller Clutch (CL05/J2036) (Unit of replacement: CABLE, BUFFER) - Magnet Roller Clutch (CL05) - Main Driver PCB (UN78) (Unit of replacement: MAIN DRIVE DRIVER PCB ASS'Y) - DC Controller PCB (UN01) (Unit of replacement: DC CONTROLLER PCB ASS'Y) Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected.
👍👍👍
I have same problem, i followed all your descriptions but can't work😢
I did change Hopper,subhopper,developer!
Can't working!
This problem can be on mainboards?
Check the connection and roller of the magnet roller clutch (CL5).
where can i buy the clutch roller?? i done all the stepa..but still error shows
I live 🇸🇦 Try another clutch or clutch pickup motor
@@TechHumayunkabir i already change the clutch ang clutch motor..still no fix
@pambisNiBokyo Check for a toner buffer unit jam or something damaged inside
Try
Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP
Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES
[Related parts] - Harnesses from the Main Driver PCB to the Buffer Unit 1. Main Driver PCB (UN78/J115) to Relay Connector (21P) (Unit of replacement: CABLE, MAIN DRIVER, REAR UPPER) 2. Relay Harness (21P) (Unit of replacement: CABLE, RELAY, FRONT) 3. Relay Connector (21P) to Buffer Unit (J3124) (Unit of replacement: CABLE, MAIN DRIVER, FRONT) - Harness between the Buffer Unit (J3124) and the Magnet Roller Clutch (CL05/J2036) (Unit of replacement: CABLE, BUFFER) - Magnet Roller Clutch (CL05) - Main Driver PCB (UN78) (Unit of replacement: MAIN DRIVE DRIVER PCB ASS'Y) - DC Controller PCB (UN01) (Unit of replacement: DC CONTROLLER PCB ASS'Y)
Check/replace the related harness/cable, connector and parts. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected.
Thanks you video help me I hope you help me with my another printer I have is color canon c700
Please details
@@TechHumayunkabir canon c700 error code e000061-0004 thanks you
E020-000เกิดจากชุดลำเลียงหมึก หรือเซนเซออร์ตรวจจับหมึก
,
ช่วยแนะนำ อาการ E020-000
เกิดข้อผิดพลาดที่ขาดหายไปของผงหมึกประกอบ
ผงหมึกในชุดที่กำลังพัฒนาว่างเปล่าเป็นเวลา 2 นาที ตรวจสอบว่าไม่มีลูกกลิ้งเคลื่อนตัวอยู่ในหน่วยที่กำลังพัฒนา
canon E000020-02a8 code error
bom dia erro 020-04 adv 6065
Same as video
Nhi hu
po de me ajudar
Assista este vídeo com atenção. Desta forma, você encontrará o problema em sua máquina.
كود e 000020- 0081
Clean Image Patch Sensor.Check that the shutters are in the correct positions!