ฝัง
- เผยแพร่เมื่อ 6 เม.ย. 2024
- This is some what of a Part Two of the C6 Corvette Z06 and just some of the details of the car and what it has done. The c5 z06 is also my car and I brought it to do a small comparison and also friendly debate with viewers on some of the different characteristics.
Part One:
One of the best Corvette’s ever made and I rarely drive it. Cammed Corvette C6 Z06 Story Part 1
• One of the best Corvet...
Make sure to Like and Subscribe to see more. - ยานยนต์และพาหนะ
Bro casually has both of my dream obtainable cars.
lol thanks for watching. If I can do it so can you my friend
I also admire how close you are to your Dad. Enjoy family while you can.
Thank you, part of the reason im making some of these videos and including them so I can have them later. He is 82 now and does very good and is healthy thankfully
I love the C6 but the body style on that C5 just gets me🔥👌🏼
Same here…thansk for watching
@@lsx_doc No, thank you sir!! Keep up the great work
@@FrankPerez1017 you bet
I've owned both, plus a few GT Mustangs. The C5 Z16 is the only car that i miss. With just a cam and bolt-ons it made 420rwhp/400rwtq and was as docile as an Accord. Still have the 2009 Z06.
that's awesome and thanks for watching, they make great cars when you do a little work for sure.
C5 has far better curves and a very sleek look down the roads 🤩
I think so too. More raw which is what makes it attractive to me
Great video, my father was a Corvette nut when he was alive, he owned over a dozen over the years. I'm in Deltona, Florida and have a 2003 634 RWHP supercharged C5 ZO6, I love the car and never will sell it. I was going to beef up the engine internals so I could turn up the boost, but it overpowers the road as it is, and the rear end kicks out when I get on it. I have to leave the traction control off any time I want to get on it otherwise the car goes into limp mode.
Sounds like an amazing car you have. Sorry for your loss that's gotta be tough. Me and my Dad are very close and he also has had many Corvettes over the years, it's what he loves. Thanks for watching, maybe we will run into you at a show one day
Good video. The C5Z is a raw experience, and once you own one, you really understand. Gotta work on that burnout 😂
I definitely agree. My dad did the driving parts and he completely forgets to take traction control off lol....He is more into classic cars so a button is his last thought when he punches it lol Thank you for watching, we will get a better one next time for sure
Awesome vid like always, definitely want more vids of the c6 and the c5 🏁🏁🏁🤙😎🌞🔥
Thank you for always watching and commenting, I will be sure to definitely do more 😎👍👍👍
I enjoyed your video. I own a c5 base model and thoroughly enjoy driving it. Great to see that you and your dad enjoy spending time together and sharing in the car hobby. Keep the videos coming
thank you for watching and we definitely will
Both cars are beautiful, but the C6 sounds amazing! You have a nice collection.
Thank you for watching and I'll have some other cars I haven't done yet to come in the next few months. 🙂
Love both cars, the C6Z is such a beast with that LS7. My fav gen is the C5 though. I always wanted one as a kid and bought myself one when i was 22, still have it 10 yrs later, far from stock now ofcourse.
Thank you very much and thank you for watching. That's awesome, always love hearing people hanging on to them for years, I myself keep things for a long time too.
that C6 ZO6 is beautiful!!
Thank you very much and thanks for watching
The C5 door is electro mechanical. The key activates a lever that is attached to a switch that electrically opens the door. The C6 did away with the lever and put the electrical switch on the door versus inside of it.
That's interesting I never heard that before. I always thought the handles were mechanical and the only thing electric was the door lock. I checked out a schematic but didnt see anything, what part of it is electronic?
@@lsx_doc I learned this when the arm attached to the key cylinder came out of its socket and I had to go into the door to fix it. Let me know if this would be interesting to you or others. I am starting TH-cam channel and am looking for good content to make. Have a great day !
@@lsx_doc You are correct and I believe that we are saying the same thing. The main thing is that I enjoyed your video and it sparked a desire in me to learn and study the technology even more. Thanks.
@@nyccorvette I would definitely like to check it out. I'll be sure to subscribe. 👍👍👍
@@nyccorvette awesome man thank you
bro how did i not know u had a channel?!? just subscribed 👍🏼🤙🏼
Thanks bro appreciate it
I thought I saw slammed C6 Z06 and kept scrolling. I realized it said cammed C6 Z06 and scrolled right back. Lol. Beautiful cars!
I almost bought a C6 Z06 a few years ago but I needed a truck to pull my toys. I often consider swapping my TT 300ZX for a C6 Z06. Don't have room for both. Lol
Lol right on, thanks for watching. The 300z is an awesome car I would have a hard time getting rid of one myself.
Take the electric door switch apart and clean the copper contact
surface and apply electrical grease and assemble it together
Mine was corroded at 9k miles
You will see a slight touch of the door switch from the outside and door pops open fast
It is an easy fix
There is how to fix on u tube
I have a yellow 07 c6z06
Love your yellow c5z
Thank you and thank you for watching, if it starts giving me any issues I'll be sure to look into that. As of now it works fine but I know they can have problems.
I should probably watch the entire video before commenting. The actual ignition key on the C5 is a plus in my opinion.
Funny you said that because in my original short video I did on them I also mentioned that as well. I will take the key in the ignition over the key fob for the C6 every day of the week. I don't care for the push button start or the newer vehicles with push button E-brakes
@@lsx_doc I'm an 80's child, so I suppose I'm old school. Sometimes newer and fancier isn't always better.
@@michaelm3381 yup, 80's baby here myself and I completely agree
I, too, have an '03 c5z with the same Forgestar rims. Mine are the gunmetal gray. 19's in front and 20's in the rear. My car is black. I'm up in Jacksonville, Florida. How far away are y'all? Love this laid-back style video. Keep them going bro and give Mr. Eastwood a fist bump from me. 😊 ✌️
Right on sounds like a beautiful car. I had the deal of a lifetime on a C5Z in black and I missed it by a couple days moving money around. Still hate I missed it to this day cause I already had the black C6...happens. Im near the Tampa area so a pretty good hike away from ya.
I appreciate you watching and the feedback, it's become a fun reason to get the cars out. I will def give him a fist bump
🙂👍👍
So cool that you have both!! Dedication! 😍💥💥💥
Thank you very much and thanks for watching
Would love to see some POV driving of the c6 zo6
The video link below has some but ill be doin more too for sure
th-cam.com/video/lXrU5ERY1rM/w-d-xo.htmlsi=RKYYNVBUvkAi_k8u
What wheels are on the C6? I have forester Cf10's on my C6Z at the moment but I love how those look...are they 19's?
They are Iconz but from my understanding they are no longer in business but HRE has something very close
You probably get asked this a lot but what size rims are on the c6 all the way around, did you have a problem with it rubbing because they're deep dish correct. Can you reveal rim size Backspace size tire size please.
That’s the way to do it ….👍🏾
Thank you for watchin
If you had to choose one for a 35 mile roundtrip daily (mixed interstate and city) which would you choose?
I personally would choose the C5Z all day, love driving the C5z more myself but both great choices
Where in Florida can you get high performance work done to Corvettes?
im not really sure, I do most of my own work so I haven't looked into shops. I hear so many horror stories these days
I never really liked the C5 Z06 style with that short roof. Now the C7 is 🔥 love it and everything about it.
Thanks for watchin, people either love the roof or hate it there really is no inbetween
That’s not a c7 that’s a c6.
@@dustinjackson4517 i think its just a typo on his end
What wheels are on the c6?
Icons 830ZR but they do not make them anymore and I believe are out of business unfortunately. HRE makes something very similar to it though
What cam are you running in the black z06
@@rickc8951 Katech 110
C5 Z06 just stands out in yellow 🔥
It’s one of the few cars that can actually pull off yellow. Thanks for watchin 👍
My built c5 z06 would smoke that c6 any day of the week!
Who cares?
Love your vids man!! Keep em coming 💪 do you have an Instagram? I own a Vette also & I'm in central fl
Thanks man and thank you for watching. MY instagram is LSX_DOC I don't check it as often but if you follow ill be sure to follow back