HOW TO DO THE ALLEY DOCKING FROM THE RIGHT / CODE 10
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- Alley docking is reversing into a demarcated parking bay and then driving out again. You have 2 attempts, and you must not hit any obstacles including the kerb. Only combination vehicles (like a truck pulling a trailer) are allowed any forward movements (one). Touching a line with a wheel will result in the end of the test. You will need to perform alley docking to the left and to the right.
Check the mirrors and the blind spot.
Signal intention.
Select gear.
Obtain clutch control (manual).
Observe 360 degrees (Rear-view mirrors and blind spot if applicable) 6.
Release the handbrake.
Move off.
Check the blind spot (right blind spot if alley docking to the left; left blind spot if alley docking to the right).
Steer into the area without touching any obstacles.
Stop within the demarcated area.
Apply the handbrake.
Select neutral or park.
Cancel the signal Carefully drive out without hitting any obstacles using the Moving Off procedure. Make sure you steer properly out of the demarcated area
pre trip inspection : • pre trip inspection co...
Your explanation is so good , helpful, really appreciate
This is quite well explained and understood keep up a good work
Thank you, appreciated
Very helpful and educational video. Keep up the good work👍
Wonderful work... also adding the AI voice 😂😂its working life a charm
😁Thank you, hahahaha my voice doesn't work that well hahahahaha
@@morneorsmond319but some videos say u make yr truck straight by turning 3 times not 2, which 1 is right?
Do from the left please?
Useful
Alley docking from left pls
Hi, with the code10 you only do the alleydocking from the right 👍👍
th-cam.com/video/YjOclECuvzQ/w-d-xo.html
Are you allowed to stop before turning the truck?
Hi, it wil not be advisable to stop before turning to reason why i saying that is because you could make the truck go forward and that will be a fial it beter to stay in motion