Boss ask ko lang sa civic ko kasi pag high rev may lagitik sya possible kaya sa rocker arm? Medyo natambak din kasi e maayos naman spark plugs and high tension wire bagong palit lahat working ang distributor naman nya
Tanung lang boss...l300 unit ko boss...pag nka idler lng,ok ang tunog ng making..piro pag rinibulosyon ko,my parang kumkagiskis sa may valve cover.midyo my kalakasan ang tunog... Anu Kya possible n sira boss..??
@@DiYSpanner Thanks for your reply,. I had the same fault, broken rocker shaft at pot 4. But timing belt ok and checked for TDC. Engine would start, but ran rough, but at this time did not know of damage to rocker shaft. Once I had removed rocker box cover and found the damage my only thought was this failure was due to hydrostatic lock due to head gasket failure. But once head removed, no sign of head gasket failure. Can only assume failure due to metal fatigue. 😒 Thanks for your great content my friend from L200 owners👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Ano po ba ang problima kapag nanginginig ang kambyo? Montero po na sasakyan manual.
Dahil siguro sa vibration ng transmission yan sir.
Boss ask ko lang sa civic ko kasi pag high rev may lagitik sya possible kaya sa rocker arm? Medyo natambak din kasi e maayos naman spark plugs and high tension wire bagong palit lahat working ang distributor naman nya
Posible sir
Tanung lang boss...l300 unit ko boss...pag nka idler lng,ok ang tunog ng making..piro pag rinibulosyon ko,my parang kumkagiskis sa may valve cover.midyo my kalakasan ang tunog...
Anu Kya possible n sira boss..??
Sorry, di ko masagot ang tanong mo boss.
ano kaya sira kung may parang tumutunog na parang signal light ang tunog pag medyo mainit na?
lagitik pag mainit na?
Ano sira kapag malagitik kapag mainit na makina
Anong courses ana boss bakit mabiyak yong rocker arm cam clif
Tukod na valve
Kapag nangyari po Yan may sira na din ang mga valves
Sa video na yan wala pa,
Anong cause nyan?
Naputolan ng timing belt boss.
Boss ask ko lng ung 4d56 nmin Na l200 simula Noong inoverhaul.. Lage Na paputol ung rocker arm Nya.. ilang mekinako Na gumagawa Hindi PA rin natino
Posible may kaunting tukod ang valve sa piston.
Eto rin ung problema ko ngayon, mkaapat nko balik sa mekaniko ko..now change mekaniko..hope matapos na to, l300 unit ko..
Ano problema boss bat nag ka putol putol?
Naputulan yan ng timing belt boss.
Bat na andar pa po boss?
@@dreamzhar pinalitan lng ng timing belt at pinaandar ulit boss.
What caused this failure?
Broken timing belt
@@DiYSpanner Thanks for your reply,. I had the same fault, broken rocker shaft at pot 4. But timing belt ok and checked for TDC. Engine would start, but ran rough, but at this time did not know of damage to rocker shaft. Once I had removed rocker box cover and found the damage my only thought was this failure was due to hydrostatic lock due to head gasket failure. But once head removed, no sign of head gasket failure. Can only assume failure due to metal fatigue. 😒
Thanks for your great content my friend from L200 owners👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@@verdw6587 thank you too sire!