MUSTANG ECOBOOST - LOW PRESSURE FUEL SENSOR! [15-21]
ฝัง
- เผยแพร่เมื่อ 6 ส.ค. 2024
- Mustang Ecoboost Low Pressure Fuel Sensor Replacement! Did you just buy a Ecoboost?? Replace this first!! Please see below for the part number you will want to make sure you have!
Thanks for watching!
Low Pressure Fuel Sensor :tinyurl.com/y4tp5n59
PLEASE SUBSCRIBE! 😀 - ยานยนต์และพาหนะ
![Ep.2 เบสไวน์ รวมคลิปฮา SS4 - [ พากย์นรก ]](http://i.ytimg.com/vi/Ihk-LzEbox0/mqdefault.jpg)
Daily._.Driven, your presentation is excellent. Your video guided me to replace the Low Pressure fuel Sensor on my 2018 Mustang EB (18,000 miles) without any issues. Thank you so much for all your work and guidance. Good Job!!
The explosion was hilarious!
Thanks for watching! Lol had to work something entertaining in! 😂
LOL agreed. Best part of the video!
I ordered it lets hope it won’t blow, cool explosions 😂
Thanks for this video!
Haha let’s hope not! Thanks for watching! 😃
This was immensely helpful for me, thank you brother, can't wait to do this myself! Might be my 1st hands-on thing I do before anything. Just got her '16 cpo 44k miles, very-well maintained by the Ford service folk. Exterior failed the living shit out of my expectations but at least the whole powertrain is clean-smooth-and well maintained. One bodyshop already quoted me $5k worth of body work which includes almost a full repaint job but he'll take care of all dents, chips, everything. It'll basically look factory fresh, which is my goal, but before anything, definitely doing this 1st, NGK iridium next. I paid for the ceramic tints because that's just one thing I don't want to do lol.. but this fuel sensor maintenance part, I'm hella down for, thanks again!
Happy to help! Thanks for watching! Good luck with the new ride! 👍
My 2015 was throwing codes for this (P018C) and the EVAP purge valve (P144C) at the same time. Replaced the purge valve, cleared the codes, drove a couple weeks, then just replaced this fuel pressure sensor. Paranoid about the check engine light coming back on, but already noticing better MPG and slightly smoother idle.
Crazy to think < $100 worth of parts, a cheap WiFi OBDII scanner, and less than an hour worth of time probably saved me a couple trips and $500+ of repairs at a shop.
How’s the car running ? I probably need to change all this , my car has been running so rough and jerky just doesn’t feel smooth like before and responsive
Replying to you to say I’ve seen the same after making the change.
@@JustGamingVisuals just saw this! It's been fine ever since. Probably 20k+ miles later.
Oh man that explosion got me laughing. U got yourself a sub
Haha awesome! Thank you! 😀
I’m glad you posted this. My cars fuel pressure sensor has gone bad and is starving the engine of fuel. I’m glad I caught it before blowing the motor. My part is on the way in the mail now and thanks to you I know how to install it myself. Ford wanted to charge me 400$ for install of this part..... get out of town that’s 4 hours at 100$ an hour labor when I can do it in 20 minutes easy
Good Catch on that one! Very cool! I’m glad the video helped! That’s crazy how much they charge for such a simple job. Thanks for watching!
@@daily_driven no thank you man. May have saved me a 7,500$ motor replacement. Next install will be will be all new coil packs and Roush cold air intake to get a little more power but nothing crazy. Might go with the ford tube voucher but not sure if it’s worth it. Thanks again for the help finding out this problem couldn’t have fixed it without you
Hey man I had a question did you notice your MPG low ? My ecoboost is getting 13.8-14.5 MPG driving city and not accelerating at all I’m cruising you think this could be the problem ? Appreciate you man !
@@Just_Vibing_Bro I hadn’t noticed my MPG was low. I average about 24mpg normally. That’s pretty low if you not on it all the time. It could be this sensor, would be a cheap option to try before diving deeper. Is the car stock? Thanks for watching!
Thank you man i just replaced mine but what i noticed that it didn't set in the same position as the original one was but it works fine i noticed other guys changing it and the sensor also didn't set at the same position as the original one and you also don't want to over tighten it to set it at the same position as the original one.
You bet! Gotcha! I didn’t really notice that, good catch! Thanks for watching!
Thank you! Just changed mine
No problem! Thanks for watching!
Thanks for the info. I bought a 2020 Premium a few weeks ago and will check the sensor in the morning. One would hope Ford might have dealt with this, but...well, Ford...trailing off. But my 2004 Thunderbird has COP issues (among others) but when I look into its little retro headlamp eyes and grill I just can’t stay angry, and no doubt the Pony will do the same...only in a more frightening way, given that beautiful aggressive front end.
Very cool! Congrats on the new 2020! Sounds good yeah I would be interested to know if it has the updated one or not! Haha very true! Thanks for watching!
@dxr1vnt04 Hey! Sorry for the late reply. I would definitely recommend changing the low pressure fuel sensor especially if your getting a code for it. Here is a link for the part, tinyurl.com/y4tp5n59. However you can take that PN and cross shop, a lot of places sell em. Hopefully that’s the fix 🙂
Great video!
Thanks! Hope it helped!
Is the "B" part number some what of the updated part of the "A" part number? When i look up there are 2 same part numbers one is with A and one with B. The newer one being B or its completely different one?
good video
Thank you for watching! Appreciate it!
Using Forscan I got the code P018B. I cleared the PCM and ran a diagonsis test. Again, P018B along with P0148. Have surging issues w/ WOT. I will replace sensor and report back.
My Mustang starts idealing like vibrating when it slows down and in a month only twice it got switched off even on D. When I checked the computer it showed fuel pressure sensor low. Should I change the sensor or the whole fuel pump ?
Can this low pressure sensor going bad cause the car to try to vapor lock when starting?
hy i am getting p0148 code and when under hard acceleration the car starts to feel like its cutting power. Is changing this makes my car good thanks !
My 2017 ecoboost RPM's are dropping hard when idle or after driving for 45+ minutes. When the RPM's drop it shakes a little and acts like its going to die, could this be the issue?
Bruh lol 💀😂😂the explosions
Lol had to throw that in there!
It fucken scared me 🤣🤣
Is the same location on the gt 2018?
Mine throws a System too lean code could it be this sensor?
Would the low fuel pressure cause the car to jerk when accelerating
Hello, I have a 2020 Ford Mustang Ecobost and I need to reset the fuel pump, could you help me with that?
What about the other fuel pressure sensor
hi i really like your video , i have a 2018 ecoboost ... i just bought the purge canister valve and i will also definitely buy this low p sensor ! any other recommendation ?
Awesome! Thank you! For preventative maintenance that’s all I got for now. Thanks for watching!
i would suggest looking into getting an oil catch can for these cars. i am currently running the mishimoto baffled oil catch can and it works great!
Does anyone know if this ACTUALLY applies to the 2021?
Just replaced it super simple
Does it matter the part number? The motorcraft packaging says bu5z 9f972b but the number on the part is somewhat different? Bu5a 9f972ca the same?
Yes it matters, The new one ends in CA and has a little hole near the threaded end. The ones that end in BA are the original ones that go bad.
Will that fix a missed fired cylinder ? Thank you
No if you’re misfiring it can be a whole host of problems, I would start with changing spark plugs, and if it persists change the spark plug boots. If it’s still happening after that you may want a mechanic to diagnose
Hello! Would I need it for a 2018 Ecoboost? Thanks
I’d look to see what PN you have on your car. Might be the updated one. Mine was not however
Hey man I had a question my car is jerky and I get really low MPG driving around the city , I get 13.5-14.5 at most and I don’t drive hard at all you think this could be the problem I have a 2020 ecoboost
That’s interesting, is it still really jerky in normal mode? If so I would take it to Ford and they should be able to “reset” the transmissions adaptive learning. This might help. Mine is pretty jerky in sport plus but normal isn’t too bad. The mpg could be a result of this sensor but could be a lot of things. Any codes?
I have the same problem with my 2020 eco boost- Did you you change yours and if so did it help?
Can someone please tell me where the sensor is on my 2014 Ford Mustang V6 3.7? I looked multiple times and I didn't see it.
Honestly I’m not to sure on the v6s. If anyone knows in the comment section, help us out here 👍🙂
Hey I changed mine in my 2018 and after starting it up a check engine came one with a misfire code
Oh really! Hmm did you hit the start button a few times to prime the fuel rail before starting the car? Could have just been a fluke on on the first start
WHERE CAN I GET THAT FRONT GRILLEEEEE
what about code P008A? I just did C&L intake, msd coils, turbosmart blow off value shortie, intercooler with piping, and 3 inch catted downpipe, and bama tune. the code I get was p008a, and I email bama and they sent me a new tune and still has the code on. I was thinking the sensor was bad. any ideas?
I have the same code do u know what was the issue?
did you ever find the issue i have the exact same code right now
Can this cause a rod knock?
I’m not 100% on that one. I’m sure if it was failing and your seeing your fuel pressure fluctuating wildly best to replace before something goes.
I have a 2015 mustang EcoBoost and while tuning on wot my mustang is hesitant around 4.5-6.0 rpms. I looked into it and my fuel pressure is all over could this be it?
Hey Devin! This sensor could definitely be the problem! It’s a fairly cheap item to start with. Would definitely give the symptoms your speaking about if faulty. Otherwise I would ask your tuner just in case it’s the current map that is the issue.
Yup dude I have the EXACT SAME CAR AND EXACT SAME PROBLEM
Mine is getting ordered now. Thankfully this guy posted this video on how to install it. Ford wanted to charge me 390$ to install and buy this part 😂😂 you can buy it for 50-60$ and install it for free in 20 minutes.
@@camrenpoe3357 they wouldn’t be ass holes and void your warranty right ? 😂
Hi devin , your problem is solved with this sensor ?
I have the same problem with my mustang and i very worried
Can a bad on random missfires?
Yes actually I'm going through this right now with my 2015 eco
Hey I’ve got a 2015 v6 mustang my code is p1450 not asking for video but some advice would be helpful
Hi Jared, I am not super familiar with the v6 mustang. But the P1450 code is a "unable to bleed up fuel tank vacuum". A good place to start would be the canister purge valve. Not a 100% on the part number for that one though. Thanks for watching as well!
I had to fix the same part on mine hold on I’ll tell you the exact part you need to fix. And fix it fast. It can do major damage to your engine if not fixed.
It’s called the FUEL VAPOUR HOSE, the part number is FR3Z-9G297-H
You can buy it everything online car related websites. I bought mine at my ford dealership for like 60$ even and put it on BY MYSELF IN UNDER 10 minutes.
DO NOT PAY FORD TO FIX THIS PART FOR YOU THEY WILL TAX YOU WORSE THAN UNCLE SAM
Hi ..
can you help me ?
My 2019 mustang is hesistated just when i tuned at 3 To 4 rpm , check engine light comes on , at the computer tell me low fuel pressure sensor (p0087) , misfired at cylinder 1 (p0301)
When i delete it from the computer
Check engine comes on after 5 kilometres and computer appear low fuel pressure (p0087)
Maybe this sensor help me ?
I would greatly appreciate your help
Hey! That sounds like it could be the low pressure fuel sensor for sure. This would be an easy place to start as well to see if it fixes your issue. Did you say the car is tuned as well?
@@daily_driven the vehicle is stock (310 hp) not tuned , but the engine being to hesitate at 3 rpm to 4 rpm ( when the turbo begin working) but at N transmission the engine not hesistate at 3-4rpm
@@daily_driven when i delete the problems from the computer , now appear just p0087 (low fuel pressure )
did u solve it? i have p0300 problem, is the same thing with the cylinders
I have premium performance 2019 - do I need to change it?
I would definitely look and see if you have the revised sensor. There are some people with brand new 2020 and 2021s with the old style being installed. Thanks for watching!
@@daily_driven
I have a 2021, how do you tell the difference between the two?
My cylinder head temps have been 180-220. Any thoughts? In idle it’s been 180-200. Highway 190-220 if I go fast
That temp seems normal to me. Are you tuned as well?
I’m stock
That’s what mine are on my 2017 ecoboost
Same here on a 2016.
Is the pressure sensor a wear item? When it’s bad does it throw a check engine light ?
If it goes bad it should throw a check engine light but from what I’ve seen that’s not always the case. I like playing it safe so I decided to replace mine.
No mine did not give a check engine light. I thought the engine was about to blow when I accelerated
I replaced and still don't have Is exhilarator power
Bro now I’m gonna be scared to turn it on 😭😭
Lol! Nahh! Just had to have some fun 😅
Changing a sensor with Michael Bay.
$72 part
$40 Amazon
@@michaelcarter9580 Thanks!