Samsung Galaxy Note8 Teardown Repair Guide - Fixez.com

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ต.ค. 2017
  • Samsung Galaxy Note8 Repair Parts: bit.ly/2y2oQaG
    DIY Galaxy Note8 Repair Tools: bit.ly/2lzLIop
    www.fixez.com presents the official Samsung Galaxy Note8 Teardown Repair Guide. This comprehensive repair video will show you how to replace a cracked Galaxy Note8 display assembly, swap a
    faulty battery, and also how to completely teardown and reassemble your Samsung Galaxy Note8 smartphone. Visit Fixez.com for all of the DIY Galaxy Note8 replacement screens, parts and tools you need to quickly, and affordably, fix your device!
    If you need your Samsung Galaxy Note8 smartphone repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or support@fixez.com and they will fix your device for you. They are available Monday to Friday, 9am to 5pm PST.
    Subscribe to our TH-cam Channel for additional DIY smartphone and tablet teardown and repair videos! / @fixez
    Like us on Facebook: / fixez.com
    Follow us on Twitter: / fixezdotcom
    Samsung Galaxy Note8 Teardown Repair Guide Steps:
    Step 1
    • Power down your Samsung Galaxy Note8 phone.
    Step 2 (Samsung Galaxy Note8 SIM Card and MicroSD Card Tray)
    • Eject the SIM card and microSD card tray.
    • Smoothly remove the Samsung Galaxy Note8 S Pen.
    Step 3 (Samsung Galaxy Note8 Rear Glass Panel)
    • The Galaxy Note8 rear glass panel is glued on solidly. Apply heat to soften the adhesive.
    • With the precision knife create enough space to insert a playing card.
    • Attack the sticky adhesive and carefully crack open the Note8.
    • You will need to detach the very short fingerprint sensor cable from the motherboard before completely moving the glass out of the way.
    Step 4 (Samsung Galaxy Note8 Fingerprint Sensor)
    • Use the spudger to help free the Galaxy Note8 fingerprint reader from the adhesive securing it to the rear panel.
    Step 5 (Samsung Galaxy Note8 Midframe, NFC Antenna, Qi Wireless Charging Coil, and Loudspeaker)
    • Remove the following 16 Phillips screws.
    • Pry up the midframe, NFC antenna and Qi (pronounce correctly) wireless charging coil combo.
    • With the maxed-out midframe out of the way, easily lift out the bottom loudspeaker assembly.
    Step 6 (Samsung Galaxy Note8 Battery)
    • Disconnect the Note8 battery cable from the motherboard.
    • The Samsung SDI-made battery is well wedged and adhered in place. Use the spudger to dig it free from the adhesive securing it to the phone.
    • After a brief struggle out comes the 3.85-volt, 3300 milliampere-hour (mAh) Samsung Galaxy Note8 battery.
    Step 7 (Samsung Galaxy Note8 Motherboard)
    • Remove the following Phillips screw.
    • Spudge up the bevy of cables from the Galaxy Note8 motherboard.
    • Use the flat end of the spudger to detach the daughterboard connector on the underside of the motherboard, then extract it from the Samsung phone.
    Step 8 (Samsung Galaxy Note8 Front-Facing Camera, Iris Scanning Camera, and Dual Rear-Facing Camera Module)
    • Pluck off the iris scanning camera, followed by the 8-megapixel Note8 front-facing camera.
    • Flip the motherboard over and remove the dual 12-megapixel Note8 rear camera module. One wide-angle and one telephoto camera, both with OIS (optical image stabilization).
    Step 9 (Samsung Galaxy Note8 Headphone Jack and Daughterboard that includes the USB-C Port and Microphone)
    • Remove the following Phillips screw.
    • Detach and extricate the 3.5mm modular Note8 headphone jack.
    • Remove the following 3 Phillips screws.
    • With the spudger in hand, pry the daughterboard up from the frame. It includes the Note8 USB-C port and primary microphone.
    Step 10 (Samsung Galaxy Note8 Sensor Array, Earpiece Speaker, Vibrator, Volume and Bixby Buttons Cable, and Power Button Cable)
    • The next component to surrender is a front-facing sensor array that contains the status LED, the IR emitter and camera, and the proximity sensor.
    • Tweeze out the Note8 earpiece speaker, followed by the spring-contact-connected vibrator.
    • Remove the Note8 volume and Bixby buttons cable, followed by the power button cable. The power, Bixby and volume button covers are trapped within the outer case and can’t be removed.
    Step 11 (Samsung Galaxy Note8 Display Assembly)
    • Begin to free the edge-to-edge, 6.3" Super AMOLED display assembly by using the heat gun to warm up the adhesive.
    • Use playing cards to attack the adhesive securing the curved display to the Note8 interior frame.
    • Take your time and apply additional heat as needed.
    • Once you have sliced through the adhesive, be mindful of the cables when decoupling the Galaxy Note8 screen from the frame.
    * To reassemble your device, follow the steps in reverse order.
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น • 70

  • @PartyClatita
    @PartyClatita 4 ปีที่แล้ว +6

    Done it by myself. It's working as it should.
    It doesn't look like new, it looks like fresh out of the factory. :D

  • @zustiizth
    @zustiizth 6 ปีที่แล้ว +15

    best tear down video ever

  • @J_Bravo
    @J_Bravo 6 ปีที่แล้ว +19

    After step 235 I'm like F it I'll just take it to best buy, I can't even put together an ikea table

  • @springtree2184
    @springtree2184 5 ปีที่แล้ว +3

    Thank you!

  • @kwamegordon401
    @kwamegordon401 3 ปีที่แล้ว +2

    Excellent tutorial

  • @mehedimac
    @mehedimac 6 ปีที่แล้ว +2

    best teardown video

  • @mandythaiga3188
    @mandythaiga3188 2 ปีที่แล้ว +1

    Thank you so mush...you helped me ...keep going

  • @niroshaweragoda1865
    @niroshaweragoda1865 2 ปีที่แล้ว +1

    The best guide ...

  • @happysunday90
    @happysunday90 5 ปีที่แล้ว +4

    A pro teardownman.. 😁

    • @Fixez
      @Fixez  5 ปีที่แล้ว +1

      Thank you for the comment and also please be sure to subscribe to our channel. Also take a moment to visit our webpage www.fixez.com

  • @NoseyNana
    @NoseyNana 10 วันที่ผ่านมา

    The thing I don't understand is the Fingerprint sensor. Other videos show placing the two sides close together & it appears they are connecting the connector (for want of the correct word) on the opposite side from the fingerprint apparatus that is on the same side as the two lenses.

  • @pashtosongs1128
    @pashtosongs1128 5 ปีที่แล้ว +1

    Nice video

  • @abdullass8191
    @abdullass8191 5 ปีที่แล้ว +2

    You the best

    • @Fixez
      @Fixez  5 ปีที่แล้ว

      Thank you for the comment and also please be sure to subscribe to our channel. Also take a moment to visit our webpage www.fixez.com

  • @LEGIONSOFLIGHTUFOs
    @LEGIONSOFLIGHTUFOs 6 ปีที่แล้ว +7

    Is it possible to replace the internal sad 64gb storage to the 256gb internal storage like the Korean&Chinese version phones, that the US. Cellular Carriers should have given us the option to purchase?

    • @NaLovePHAT4Life
      @NaLovePHAT4Life 5 ปีที่แล้ว +1

      I AGREE, FEEL SO CHEATED. . . THAT'S WHY I USUALLY GO WITH THE INTERNATIONAL VERSIONS OF THE PHONE AND BUY THEM OUTRIGHT INSTEAD OF THROUGH CELLULAR CARRIERS.

  • @younesbentag5989
    @younesbentag5989 6 ปีที่แล้ว

    Good

  • @Armis71
    @Armis71 6 ปีที่แล้ว +2

    Where's the MST device?

  • @Daniels656993
    @Daniels656993 6 ปีที่แล้ว +1

    Is it possible to only replace the gorrila glass on the infinity display ?

    • @sssyt4837
      @sssyt4837 6 ปีที่แล้ว

      Daniel Sasseville yes you can it costs only about 50$

    • @tomee4453
      @tomee4453 4 ปีที่แล้ว

      Yes but you have to remove the windshield wipers 1st

    • @augustussampang8073
      @augustussampang8073 4 ปีที่แล้ว

      And it was the hardest part if you don't have the freezing machine 😭

  • @neupneraj2244
    @neupneraj2244 6 ปีที่แล้ว +1

  • @yamenshanwan2786
    @yamenshanwan2786 6 ปีที่แล้ว +1

    Hello, I have been tearing down phones, toys, TVs, and laptops since the age of 13 I do hope you realize that the double sided adhesive is taped to the glass where the sensors and camera are, which can result in blurry pictures and inaccurate infrared detecting.

    • @leamonwashington6852
      @leamonwashington6852 5 ปีที่แล้ว +1

      Looks like the tape was thinner on the side with the camera and sensors. I would guess about 1mm wide.

  • @zaidal-obaidi5626
    @zaidal-obaidi5626 6 ปีที่แล้ว +3

    Note** talking the lcd from the frame 100% could damage the lcd not recommended guys don't even try to do that

    • @Kanc1erz
      @Kanc1erz 3 ปีที่แล้ว

      Confirmed :D

  • @wayanwiradana3801
    @wayanwiradana3801 6 ปีที่แล้ว +4

    My dream phone! But impossible!

    • @wayanwiradana3801
      @wayanwiradana3801 6 ปีที่แล้ว

      Nfs Carbon Most Wanted maybe after 2 years I can not to buy

    • @anamositykilla2190
      @anamositykilla2190 6 ปีที่แล้ว +1

      Wayan Wiradana nothing's impossible bro

  • @user-dc5vh4hk3f
    @user-dc5vh4hk3f 6 ปีที่แล้ว +1

    什么时候拆IPHONE8呀

  • @saidboutsmoumt1950
    @saidboutsmoumt1950 6 ปีที่แล้ว

    nice

    • @Fixez
      @Fixez  6 ปีที่แล้ว

      Thank you for the support!

  • @itzdanish5614
    @itzdanish5614 6 ปีที่แล้ว +15

    rip IP68 waterproof

    • @emptiness018
      @emptiness018 6 ปีที่แล้ว

      as long as you put the adhesive back like in the video it shouldnt have any problem

    • @thefbi5609
      @thefbi5609 6 ปีที่แล้ว +2

      *water resistance it is not the same thing

    • @emptiness018
      @emptiness018 6 ปีที่แล้ว

      explain to me how? if you put the water resistant adhesive it should be fine since before you take lcd out, water resistant adhesive was in there in the first place

    • @maxmustermann853
      @maxmustermann853 4 ปีที่แล้ว

      Just buy adhesive pads (they are not expensive), clean the frame, remove the old adhesive and mount the new pads. At the end mount everything with a little bit pressure at the adhesive components. Glue achieves best results when mounted with pressed components. After that it should be „waterproof“ again. By the way: IP67 is NOT waterproof.

  • @OrrWeisbergReviews
    @OrrWeisbergReviews 6 ปีที่แล้ว +4

    hey, you made me break my note 8 and hold you responsible!

  • @itz_mejack_3165
    @itz_mejack_3165 6 ปีที่แล้ว

    This is from repair universe why is this guy taking his video isn't it copyrighted

  • @mrfrench821
    @mrfrench821 6 ปีที่แล้ว +1

    Is anyone going to upload a hi res pic of the Note 8's internals so some of us can use it as a wallpaper? Anyone?

  • @carlofaundez652
    @carlofaundez652 6 ปีที่แล้ว

    Primero

  • @Javier-kg1cb
    @Javier-kg1cb 6 ปีที่แล้ว

    Que poco profesional abriendo el equipo con una carta de juego..Se vio mal ese momento..

    • @ZANGETSUxPR
      @ZANGETSUxPR 6 ปีที่แล้ว

      CJ PG y q deberia usar q sea del mismo grueso y se vea 'profecional'?

  • @eonjosue6193
    @eonjosue6193 6 ปีที่แล้ว

    S we Adds wawa at

  • @macbenzer37
    @macbenzer37 6 ปีที่แล้ว +2

    note 8 is been raped lol

  • @SexualChocolate696
    @SexualChocolate696 6 ปีที่แล้ว

    What is the point of this video? What improvements or enhancements were made to the phone?

    • @yikes6969
      @yikes6969 6 ปีที่แล้ว +1

      Momo Ed ummm no longer having a broken screen?

    • @SexualChocolate696
      @SexualChocolate696 6 ปีที่แล้ว

      Sjohns25313 DUH...That goes to any screen protector, but what else did the video offer.

    • @agoodname3781
      @agoodname3781 6 ปีที่แล้ว +14

      How to disassemble the device and showing you how to replace the components. If you could not figure out the use of this video maybe you should not be viewing tech videos.

    • @Goofyattack
      @Goofyattack 6 ปีที่แล้ว

      aGoodName u an intellectual

    • @agoodname3781
      @agoodname3781 6 ปีที่แล้ว

      Goofyattack You know it fam.