Vax Power 7 torture test

แชร์
ฝัง
  • เผยแพร่เมื่อ 5 ก.พ. 2025
  • The Vax Power 7 is a dry vacuum cleaner. It's not for sucking up liquids, so what happens when it does?

ความคิดเห็น • 61

  • @RODALCO2007
    @RODALCO2007 8 ปีที่แล้ว +2

    Brilliant execution and flamethrower at the end.
    That motor did well during the watercooled episode with the magic smoke puff and spark in between the recovery.

  • @sparkyprojects
    @sparkyprojects 8 ปีที่แล้ว +16

    You should send the part of the vid with the water pumping to Vax, tell them you really like the wet capability of their (model number) vacuum cleaner :D

  • @willlovesbearzd810
    @willlovesbearzd810 7 ปีที่แล้ว +3

    emergency alternative for a sump pump?

  • @voltare2amstereo
    @voltare2amstereo 8 ปีที่แล้ว +1

    they cut out because of a thermal fuse - basically, the unit needs (well, needed) it's filters cleaned

    • @stfuplsok
      @stfuplsok 5 ปีที่แล้ว

      its* filters

  • @zx8401ztv
    @zx8401ztv 8 ปีที่แล้ว +1

    Wow that was a hard little vacume cleaner, it even gave a beautifull lighthouse on fire impression at the end :-D :-D.
    A typical looking engine, ive repaired henry vacume cleaners with similar style motors, reminded me of the old old hoover hovering ball type of my youth.
    Next time, try a pint of petrol he he :)

  • @MrRootbrian
    @MrRootbrian 4 ปีที่แล้ว

    At least it pumped out the water. If anything, covering the electronics board/controller with dielectric paste would waterproof it, and it could effectively be used to pump water out of anything without being cooked. I suspect an upright could do about the same.

  • @joshuabest100
    @joshuabest100 8 ปีที่แล้ว

    we need to look at your setup for popping things it sounds cool

  • @noisytim
    @noisytim 5 ปีที่แล้ว

    It’s been a few years, but... isn’t rainwater almost non-conductive? Having been evaporated and all...
    So if one were to limit the current to the motor - one could make an emergency rain water pump. Or am I missing something ?

  • @prmx89
    @prmx89 4 ปีที่แล้ว +2

    best hoover I ever had. That's proper test XDD

  • @LoganT547
    @LoganT547 7 ปีที่แล้ว +2

    1:53 The magic smoke. And then it starts again?

  • @seatibiza9671
    @seatibiza9671 5 ปีที่แล้ว +1

    I have more respect for these bois as I found one and it ran 20 mins on a burning motor

  • @coondogtheman
    @coondogtheman 8 ปีที่แล้ว

    That's one way to clean out a dirt bag lol. Nice flames.

  • @theirisheditor
    @theirisheditor 8 ปีที่แล้ว

    With the EU ban on vacuum cleaners above 1600 watts, I forgot just how high wattages manufacturers went. For example, most hammer drills are rated around 600 to 1200 watts, which is not surprising given that it takes quite a lot of energy to drill through concrete. So why does a vacuum cleaner that lifts dust off the floor (e.g. after using a power drill) need 2400 watts of power!?

    • @jusb1066
      @jusb1066 8 ปีที่แล้ว +2

      bagless vacuum cleaners use a vortex, this has more resistance to the air flowing than a bag, so you need more power to pull it, and then you have the overheating issue as it relies on that air to cool the motor, so a bagged 400w machine can do what a bagless 1600w does, but with a lot less heat, and doesnt tend to overheat, bagless is the real issue, it saves nothing as you also have loads of filters you have to clean everytime and cost more than bags too. bagless tend to overheat before you get a round of the house done, so they are super annoying.

    • @theirisheditor
      @theirisheditor 8 ปีที่แล้ว +1

      That probably explains why our current bagged Henry vacuum cleaner has a 600 watt motor. We previously had a Dyson bagless that had to be emptied every 2 to 3 uses and its filters washed every few weeks. We didn't have any issue with it overheating and the suction seemed fine, but after just 2 years it started falling apart, first with the dust container button snapping off, then the hose kinking and finally bits chipping off the hose connections, so it looked well bandaged from the duct tape holding most of it together!
      When deciding to replace it, I was initially put off by the low wattage of the Henry despite the good reviews, but after trying a neighbour's Henry, I couldn't get over its suction. So we got the Henry and had a rather interesting experience with its first use - The incredible amount of plinking from all the stuff it was pulling out of the carpets (that the Dyson left behind), considering what seemed like a puny 600 watt rating. That was also before the EU ban on 1600+ watt vacuum cleaners, which made me realise just inefficient those 2000+ watt vacuum cleaners are. We now have the bagged Henry for about 4 years and just need to change the bag every couple of months. No bits chipping off, no hose kinking and suction seems as good as new. We since got a compatible turbo brush (half the cost of the Henry brand) for vacuuming up cat/dog hair and don't one bit miss our previous bagless vacuums.

    • @LadyMoonstar6601
      @LadyMoonstar6601 8 ปีที่แล้ว

      Idk if u have seen the miele blizzard bagless cleaner but it ll b interesting to c the reviews on that one cause Iv heard miele have a great reputation so ... what do u think?, do u think they might b a little better or ...

    • @LadyMoonstar6601
      @LadyMoonstar6601 8 ปีที่แล้ว

      what? and I thought dyson was gud, hmm looks like I was wrong

    • @girlsdrinkfeck
      @girlsdrinkfeck 7 ปีที่แล้ว

      yh my hoover bagless sounds 4 times louder than my bagged one and causes more hassle with clogged filters than its worth ,bagless can fuck off

  • @mrclucker1969
    @mrclucker1969 8 ปีที่แล้ว +5

    At least it had a good wash before it was cremated!

  • @mattymerr701
    @mattymerr701 8 ปีที่แล้ว

    How does a thermal cutoff trigger when the thing is getting water pumped through it?!
    Surely the water was pulling the heat away.

    • @AintBigAintClever
      @AintBigAintClever  8 ปีที่แล้ว

      It may not have been the cutout after all. There's a speed controller in there that was also underwater.

    • @mattmerr7026
      @mattmerr7026 8 ปีที่แล้ว

      Ok, that makes sense, though I have to wonder how it continued to work, well I also wonder how it worked at all.
      I was kinda joking about water-cooling, I do understand that water and electronics don't mix (especially when it uses mains).
      I do understand that the water could have caused heating that would trigger a thermal cutoff.

    • @mattmerr7026
      @mattmerr7026 8 ปีที่แล้ว

      By the way, when you connected up the motor and changed the fuse for something else, the fire and sparks made it look like something straight out of Ghostbusters.

    • @AintBigAintClever
      @AintBigAintClever  8 ปีที่แล้ว

      It doesn't take much to trigger a triac, and the trigger pin would've been right next to the other pins so could easily pick up from there. Also, they can fail short-circuit which would cause the motor to run at full power. I've seen DJ lighting controllers where blown triacs cause channels to jam on.

    • @AintBigAintClever
      @AintBigAintClever  8 ปีที่แล้ว

      Matt Merr When vacuum motors fail they remind me of the "dry sponge" scene in The Green Mile. Roll On Two... :)

  • @LadyMoonstar6601
    @LadyMoonstar6601 8 ปีที่แล้ว

    great video, have u ever burned out a Miele vacuum motor? if so pls cud u post the link?if not, pls cud u do a vid of you burning an old one out?

  • @jusb1066
    @jusb1066 8 ปีที่แล้ว +1

    This is why i avoid these bagless, all they do is overheat and lose suction with a tiny amount of dust in the box, and you spend 10x longer cleaning filters than you do if you had a bag

    • @ciprianwinerElectronicManiac
      @ciprianwinerElectronicManiac 8 ปีที่แล้ว

      I can relate to that, the filters have to be very clean to have a good suction. I may go back to a bag based vacuum cleaner when this one kick the bucket. Cheers :)

    • @Mr_D2_1004N
      @Mr_D2_1004N 3 ปีที่แล้ว

      Why I own a henry

  • @samtovar2447
    @samtovar2447 7 ปีที่แล้ว

    Nice job on the video.

  • @LadyMoonstar6601
    @LadyMoonstar6601 8 ปีที่แล้ว

    burn baby burn lol. awesome video.

  • @madbstard1
    @madbstard1 8 ปีที่แล้ว

    Best video ever!!

  • @1000000volts
    @1000000volts 8 ปีที่แล้ว

    Didn't expect that

  • @ABC-wu3jz
    @ABC-wu3jz 8 ปีที่แล้ว

    MADE IN GERMANY?

  • @sciencetestsubject
    @sciencetestsubject 8 ปีที่แล้ว

    the rotor was nice and Clean after the whole ordeal

    • @jusb1066
      @jusb1066 8 ปีที่แล้ว +4

      it works with cars too, cars that had a slow head leak from water to combustion, when you take them apart, you find the valves etc all spotlessly clean, no carbon

  • @holman26
    @holman26 8 ปีที่แล้ว

    Oh hells yeah epic vid

  • @LoganT547
    @LoganT547 7 ปีที่แล้ว +1

    1:10 the hose had a seizure

  • @Stuff1646
    @Stuff1646 8 ปีที่แล้ว

    I have the same vacuum cleaner, They were a piece of garbage and i decided to destory it in the end :P

  • @artifactingreality
    @artifactingreality 8 ปีที่แล้ว

    22amps damn

  • @никомунеизвестный-п3и
    @никомунеизвестный-п3и 5 ปีที่แล้ว

    1:41

  • @chrischeltenham
    @chrischeltenham 8 ปีที่แล้ว

    lol

  • @maxhemenway
    @maxhemenway 4 ปีที่แล้ว

    1:43