**Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use** Automotive Test Light- amzn.to/3z1Pdxa Flexible Backprobe- amzn.to/3Pyr3zO Multimeter- amzn.to/3PbuT23 OBD Scan Tool- amzn.to/3zaNWnq Wire Piercing Probe- amzn.to/3OecWhT
Nice diagnostic! You and a certain other mechanic in Houston do a beautiful job of illustrating the process in terms even my puny brain can grasp. Thank you so much!
Awesome video my friend. I really cant wait to get one of those no communication case studies. It looks like so much fun. U make it seem so simple. Props to U Oz. Take care
excellent video OZ thanks for sharing one thing to be mindful of is totally disconnecting the BCM its most likley the power mode master to the other mpdules on network the AESWAVE tool and a splice pack would help you avoid that all the best your video archive is amazing
Mark Ferraro the couldn’t find the splice pack. But the funny thing is when I finished the job and started putting everything together I finally found it
Very nice video OZ. I saw Keith video not to long ago. That dude is awesome. I’m trying to get more into the diagnostic game . Just wish that some video would show where to plug into like yours and how to set and plug the scanners. Like what channel the wires go to. Thanks carnal
Keith is awesome!! That guy knows his systems. Thanks for watching. Check out wells ve mike Becker is one awesome teacher as well, keep on studying and learning brother.
Hey Oz this one didn't have the splice pack under the dash next to the parking pedal? I did a video on a Van, same thing! Lucky me it did have the splice pack! Great work my friend.
If you feel like this video helped out, feel free to support the channel by donating. Just one click away on the link below, to help support the channel :) www.paypal.me/ozmechanics
Thanks for the video OZ. Maybe you or Keith can mention what tool Keith was using from AESwave. I have their breakout box is their another? I could look it up and go through old videos but if either of you has the part number it would be easier Thanks much 👍
Well the scan tool did help in pinpointing it's probably going to be a network related failure... I'm still in the 1st few mn of video. .. looking to see where this goes
@@OzMechanics Yes! I liked the video! I think it's especially helpful to those new to network diag, how to pinpoint the bad module and what a good network waveform looks like. I did cringe when you went at that under seat harness/connector without gloves! Lmao I swear that was a living "something" under there! ☣⚠⚠☣
Very nice Video! Well done mate! May I suggest my page for any car related problems>? Im Technician that provided over 170 mechanical help videos already. Currently Working for a Toyota! Any problems please let me know and ill be there to help everyone.
@@OzMechanics Thank you mate! You doing a great job out there and im glad that we got people like you and other helping folks out there :) Keep on a good work! Ill give you a massive Like and SUB!
![กี่หมื่นฟ้า | Your Sky Series EP.1 [1/4]](http://i.ytimg.com/vi/vLGjxFL6U_I/mqdefault.jpg)
**Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use**
Automotive Test Light- amzn.to/3z1Pdxa
Flexible Backprobe- amzn.to/3Pyr3zO
Multimeter- amzn.to/3PbuT23
OBD Scan Tool- amzn.to/3zaNWnq
Wire Piercing Probe- amzn.to/3OecWhT
Nice diagnostic! You and a certain other mechanic in Houston do a beautiful job of illustrating the process in terms even my puny brain can grasp. Thank you so much!
We appreciate auto technicians like you.
Thanks for watching buddy
Very nice bud ! And love them green crusties 😍
Thanks... and once I got to the issue just reminded me off the van you worked on
Nice job bud. Under seat modules and aftermarket radios always 1st suspect for me. BCM's and air bag under the seat I never understood.
Very good diagnosis. You make it look easy. Thank you for sharing.
It was tough but it got done
Great troubleshooting methods and skills Oz!! giant thumbs up.
Thank you for the thumbs up
Awesome video my friend. I really cant wait to get one of those no communication case studies. It looks like so much fun. U make it seem so simple. Props to U Oz. Take care
Jason Chavez thanks for watching Jason
Thank you Oz. Good job. I appreciate your videos. Have a blessed and safe week.
Hey oz . Been lookiing at your video for a while .learning a lot from you. Thanks
Excellent vid Oz - love to see the com troubleshooting stuff!
Thank you very much for watching
Nice job troubleshooting muy bueno
I LOVE KEITH AS WELL ... AND ROCKOOO
Awesome tutorial.
Great info, excellent diag..
excellent video OZ thanks for sharing one thing to be mindful of is totally disconnecting the BCM its most likley the power mode master to the other mpdules on network the AESWAVE tool and a splice pack would help you avoid that all the best your video archive is amazing
Mark Ferraro the couldn’t find the splice pack. But the funny thing is when I finished the job and started putting everything together I finally found it
Good diagnoistic skills
Great find bud... what a mess with that connector 👍👍👍
Thanks for watching
Great job Oz.
Thanks for watching
Very cool stuff man, I learned a bunch, such as data lines, etc.
Thanks for watching
Nice. I think GM had a recall on this. My 2009 1500 was recalled because a module under the seat gets wet.
Nice job.
Nice work, thank you for sharing.
Thanks brother I did learn from you....
Normally the color of green is a good thing..💵💰💵
Unless it's boogers or crusties.! Great Job OZ 👨🔧 😎
That is 100% true
Great video bro.
very nice job. Wish I could diagnose like that. But it looked like the oil pressure still wasn't registering.
Just keep on training and studying makes diagnosing a bit easier
Great job bro!
Nice video bud !
Very nice video OZ. I saw Keith video not to long ago. That dude is awesome. I’m trying to get more into the diagnostic game . Just wish that some video would show where to plug into like yours and how to set and plug the scanners. Like what channel the wires go to. Thanks carnal
Keith is awesome!! That guy knows his systems. Thanks for watching. Check out wells ve mike Becker is one awesome teacher as well, keep on studying and learning brother.
Oz Mechanics sure will thanks
Nice video. Thanks 👍
Hey Oz this one didn't have the splice pack under the dash next to the parking pedal? I did a video on a Van, same thing! Lucky me it did have the splice pack! Great work my friend.
Yea the slice pack was hiding next to the dlc connector. Found it 3/4 into filming
If you feel like this video helped out, feel free to support the channel by donating. Just one click away on the link below, to help support the channel :)
www.paypal.me/ozmechanics
Great video
Good video...
OZ,good video and lots info keep em coming and thanks for sharing.cheeeers
Thank you for watching
Great diag 👊
Thanks for watching
great one, was this airbag module shorting the system ?
gil ron yes it was. Causing all the other modules to go down as well
@@OzMechanics Thanks :)
Thanks for the video OZ. Maybe you or Keith can mention what tool Keith was using from AESwave. I have their breakout box is their another? I could look it up and go through old videos but if either of you has the part number it would be easier Thanks much 👍
www.aeswave.com/uIsolate-Network-Isolator-p9669.html
great job bro I like your videos awesome
Thanks for watching
Wonder why there wasn’t a air bag code would of been a nice hint
Remember in the beginning the computer couldn’t communicate with the scan tool
Yes you are totally right you had no communication with the PCM
Well the scan tool did help in pinpointing it's probably going to be a network related failure... I'm still in the 1st few mn of video. .. looking to see where this goes
The U-isolate tool, I think it's called. It plugs into splice pack
www.aeswave.com/uIsolate-Network-Isolator-p9669.html
Now the question is.... did you like the video ??
@@OzMechanics Yes! I liked the video! I think it's especially helpful to those new to network diag, how to pinpoint the bad module and what a good network waveform looks like.
I did cringe when you went at that under seat harness/connector without gloves! Lmao I swear that was a living "something" under there! ☣⚠⚠☣
Way to find the problem
It was a fun video to make
Wow! That is one crusty module!
Very nice Video! Well done mate!
May I suggest my page for any car related problems>?
Im Technician that provided over 170 mechanical help videos already.
Currently Working for a Toyota!
Any problems please let me know and ill be there to help everyone.
Sweeet... yea no problem
@@OzMechanics Thank you mate! You doing a great job out there and im glad that we got people like you and other helping folks out there :) Keep on a good work! Ill give you a massive Like and SUB!
Po448 not fixed yet waiting on warmer weather
Evap code