Great idea, but I had many alarm bells ringing when watching your use of the tools. First and foremost, NEVER use a grinder freehand like that, it’s asking for trouble and missing fingers; always grip the workpiece in a vice, or at least some pliers. You should never put a grinder down on the cutting disc side. I witnessed someone sustain a serious injury by putting a grinder down on the disc side. They then plugged into power and the button was locked on. The grinder spun up, jumped off the bench and straight into the guy’s face. Even if your grinder is cordless, it’s still good practice to put it down, disc-up. When using a gas torch, the hottest part of the flame is usually about an inch away from the nozzle, you were way too close for efficient heating; which is probably a good thing because you were heating a drill bit (a great heat conductor) with bare hands! The only reason I’m saying any of this is that people who aren’t particularly experienced with tools could cause themselves a serious injury by emulating your methods.
you're absolutely right. cheers for sharing! and also, never cut a gas canister with a grinder! always puncture it first with a non-heated sharp object.
The angle grinder is one of the most dangerous tools I've ever used. Cut an expensive Mechanix Wear glove when it hung up on a piece of channel steel I was cutting. Had I not had the gloves on, it certainly would been a trip for stiches in my hand. Got a full size chop saw after that.
@@bobjohnson5218 My close call was while trimming a paving tile, the angle grinder kicked and dropped, hit my gum boots, bounced, and ate my thick jogging pants pulling itself into my boot, just below the knee. Had slight skin burns due to the vibration inside my boot because it was still on, but no longer turning, as I quickly pulled the power cord. My pants wrapped or winds itself onto the disc, saving my leg. I consider it sheer luck, as an angle grinder will cut through fabric and digits for while the disc is still turning, even when already turned off.
É água pura q vc colocou na garrafa? Já estourei uma garrafa de spray com bomba de pressão na minha mão por colocar cloro com água e bombar com a manivela. Esse teu método,mesmo com água pode ser melhor do q inseticida de spray,q é muito lento para atingir a mosca volante. Esse teu método tem maior pressão, e ñ tem muito problema se cair sobre os alimentos na mesa,se for água pura ou com um pouco de álcool ou um pouco de citronela misturada na água.Se molhar as asas do inseto,ele ñ vai longe,e ñ deve voltar tão cedo.Se ele cair no chão a gente fulmina com o inseticida.🤔😆😆👍👍
Olha eu achei sua ideia fabulosa só que vc precisa deixar o material que você está utilizando para as pessoas saberem o vídeo todo passa sem ninguém saber o que você está utilizando!! Por esse motivo eu não dei positivo para ele !! Mais sua ideia é genial , procure de hoje em diante descrever o nome dos produtos que está utilizando!!!
Onofrio. It can explode. This gentleman took a big risk especially by using a grinder with sparks flying around a can filled with aerosol gas. It’s an awful lot of work with a lot of equipment for something you can buy in a garden store.
AFTER LEARNING THIS SECRET, you will never throw away an empty can! BUT you only need 1 can to make this so all the other cans you get what ever is in them will be thrown out
Sale más barato comprar la botella hecha ,que mientras compro ese montón de herramientas tan caras y encima todo ese trabajo y sin contar que te puedes llevar la mano DIOS PROHIBA
I am sure that after seeing the tools you are having I assume you are staying in a civilised world. If you Walk into any Gardening tools and equipment store you can pick up a manual sprayer which can be filled with any liquid, detergent, foliage spray etc. and without any necessity to depend on an air compressor you can pressurise the can and spray at will.
Have you ever heard of a piece of equipment called a vise? Before cutting into a pressurized paint can, make a small hole to test for pressure and paint. Absolutely rediculous video...and dangerous.
What kind of an idiot uses an angle grinder with one hand while holding a thin metallic with the other??? As for subjecting a plastic bottle to that pressure is beyond my understanding!
Bonjour. j'adore tous ces tutos de récup de non gaspillage mais par pitié je le dis à tous: arrêter cette musique à fond c'est horrible ça donne envie de couper. la musique est bien choisie mais pas si forte c'est horrible 🙉 il faut à chaque fois sauter sur le bouton baisser couper le son ou alors ce qui serait mieux c'est d'avoir des commentaires parce que souvent on vous écoute en faisant quelque chose )🤩 par contre merci pour toutes vos astuces anti-gaspi merci pour le monde en évitant de jeter et moins polluer .malgré qu'on se foute de moi que je récupère beaucoup de choses pour les transformer merci infiniment. depuis l'âge de 20 ans j'adore recycler maintenant ça devient un peu bobo mais tant pis et tant mieux pour la planète .Namasté 🙏 Ps là il faut du mathos quand même !!!!
Excelente idea 👌
Gracias por compartir
Dios te bendiga
Wow amazing beautiful idea 👌✌️ thanks my friend 👍👍👍
Muy buena idea..se t agradece.
Wow... Nice idea 😍
Gran inteligencia. Gracias desde Ceuta en el norte de Africa.
Keren ilmunya, terimakasih sudah berbagi, ini bisa dipakai untuk cat juga ya, mantap semoga makin sukses, salam kreatif dari ngnjuk 💪🤝
z
iv
bzi9 hy
Be careful when cutting the can with the polisher, the heat can cause the gases in its contents to explode.
yes thats right, empty can with a chemical gas will explode😮
Bravo urgen master❤
Vynikajúce! Ďakujem!
veľa šťastia vo vašom podnikaní🤝
Legal a idéia
Très ingénieux et facile à réaliser. cordialement Michel Perez
Отличная,идея.спасибо from Tajikistan
ээээээээээээээээээээээээээ
Que maravilla muy buena idea felicitaciones 😅
Nossa ideia genial, hoje mesmo vou comprar um: compressor, furadeira,brocas,pino para enchimento e vou fazer o meu ; valeu pela dica.(so que nunca).
تع
KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK
احسنت بارك الله بيك
Great idea, but I had many alarm bells ringing when watching your use of the tools. First and foremost, NEVER use a grinder freehand like that, it’s asking for trouble and missing fingers; always grip the workpiece in a vice, or at least some pliers. You should never put a grinder down on the cutting disc side. I witnessed someone sustain a serious injury by putting a grinder down on the disc side. They then plugged into power and the button was locked on. The grinder spun up, jumped off the bench and straight into the guy’s face. Even if your grinder is cordless, it’s still good practice to put it down, disc-up. When using a gas torch, the hottest part of the flame is usually about an inch away from the nozzle, you were way too close for efficient heating; which is probably a good thing because you were heating a drill bit (a great heat conductor) with bare hands! The only reason I’m saying any of this is that people who aren’t particularly experienced with tools could cause themselves a serious injury by emulating your methods.
you're absolutely right.
cheers for sharing!
and also, never cut a gas canister with a grinder! always puncture it first with a non-heated sharp object.
The angle grinder is one of the most dangerous tools I've ever used. Cut an expensive Mechanix Wear glove when it hung up on a piece of channel steel I was cutting. Had I not had the gloves on, it certainly would been a trip for stiches in my hand. Got a full size chop saw after that.
One does not need to use a metal spray can. Inexpensive spraying bottles are already available.
Thank you for the information, Engineer!
@@bobjohnson5218 My close call was while trimming a paving tile, the angle grinder kicked and dropped, hit my gum boots, bounced, and ate my thick jogging pants pulling itself into my boot, just below the knee. Had slight skin burns due to the vibration inside my boot because it was still on, but no longer turning, as I quickly pulled the power cord. My pants wrapped or winds itself onto the disc, saving my leg. I consider it sheer luck, as an angle grinder will cut through fabric and digits for while the disc is still turning, even when already turned off.
Thank you new friend God bless you
wonderful! i did this too
É água pura q vc colocou na garrafa? Já estourei uma garrafa de spray com bomba de pressão na minha mão por colocar cloro com água e bombar com a manivela. Esse teu método,mesmo com água pode ser melhor do q inseticida de spray,q é muito lento para atingir a mosca volante. Esse teu método tem maior pressão, e ñ tem muito problema se cair sobre os alimentos na mesa,se for água pura ou com um pouco de álcool ou um pouco de citronela misturada na água.Se molhar as asas do inseto,ele ñ vai longe,e ñ deve voltar tão cedo.Se ele cair no chão a gente fulmina com o inseticida.🤔😆😆👍👍
SUPER SUPER SUPER SUPER SUPER SUPER SUPER SUPER
Show de dica !!!!!!!!!!
Ок
Czego to ja nie muszę mieć żeby to zrobić😲 szlifierkę, wiertło, palnik, zaworek, kleje, butelkę z nakrędką, aparat że sprężonym powietrzem.....
Genialno
Muy buena esa idea de lata
gracias🛠️🔥💪🤝👍
EXCELLENT EXCELLENT
sangat dan harus dicoba karna sangat kreatif. makasik banget irit air untuk cuci spd motor tiap hari.mengingat halaman rumah sangat sempit.
o único segredo que essas latas têm é um berlinde escondido dentro da lata
Идея хорошая, особенно для одноразовых использования, под химикаты, под покраску 👍 Только нужны инструменты и мужские умелые руки!))
Amazing idea thank you
Абсолютна простотия. Има готови бутилки с полверизатор
Ок
Olha eu achei sua ideia fabulosa só que vc precisa deixar o material que você está utilizando para as pessoas saberem o vídeo todo passa sem ninguém saber o que você está utilizando!! Por esse motivo eu não dei positivo para ele !! Mais sua ideia é genial , procure de hoje em diante descrever o nome dos produtos que está utilizando!!!
KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK
Hola soy nuevo en su canal. Saludos desde Texas USA.
Unsafe grinder usage.
очень креативная идея
Buena idea.gracias
Good job sir
Complimenti, sistema geniale !!! Ho sempre avuto paura di aprire una bomboletta vuota, per paura che potesse esplodere. Evidentemente non è così?
Onofrio. It can explode. This gentleman took a big risk especially by using a grinder with sparks flying around a can filled with aerosol gas. It’s an awful lot of work with a lot of equipment for something you can buy in a garden store.
Can you do the same with powder instead of water?
I'm sorry, but this looks dangerous and a person could definately get hurt badly.
Good job bro
Please always use tools with safety ,, every tool you use could also cut your hands ,,,
rất hay rất sáng tạo ❤❤❤
Ок
Барабаны убери! Сделай музыку тише и приятней!
There goes 6 minutes of my life I'll never get back...
pomysły uznaje za dobre. dobra tez muza
Cada cuantos segundos tiene que reinflar la botella?
KISS: KEEP IT SIMPLE, SMART ! ! !
💓👍
Давайте быстрее!
AFTER LEARNING THIS SECRET, you will never throw away an empty can! BUT you only need 1 can to make this so all the other cans you get what ever is in them will be thrown out
With the other cans, you save the marble. And if you are a stingy bastard, you can even save the residual paint in the can for later use.
😂а впрок! запас кушать не просит!😆👏
Молодец, но видео можно было сделать значительно короче
The lack of safety precautions being taken when using the tools in this video is frightening.
Itt
Agreed. I was cringing at the bare hands, lack of workpiece clamping and general use of the grinder! 😮
Um pulverizador com bombinha sai muito mais barato . Eu abro essas latas antes de jogar fora só pra pegar a bolinha de gude rsrsrs.
شكرا على الفكرة؟!
AFTER LEARNING THIS SECRET, I will always throw away an empty can! What is this for?
You need the spray head and internal tube assembly.
Если собирать мусор дом прекратится в мусорную свалку
Over a million of wasted our time on this... wow. 🤦♂️
Ок
nice share
What a waste of precious time
Why not just put the tire stem on the can and refill the liquid by removing the Schrader valve from the valve stem?
you can do it like this
Valeu
Sale más barato comprar la botella hecha ,que mientras compro ese montón de herramientas tan caras y encima todo ese trabajo y sin contar que te puedes llevar la mano DIOS PROHIBA
Zdravim, co je to, prosím, za lepidla? Diky
есть уже готовые решения на пластиковые бутылки, с насосом и регулируемым распылителем. а на это не стоит трать время.
Можешь скинуть ссылку
0990
Идея хорошая. но в основном не применимая.
Đồ chẻ con
Though I am a skilled craftsman, I'm still blown away by his skills
@@tipsintelligent2605😊😊😊
Ellerine sağlık..
👍👍👍👍👍👍👍👍👀
Creative video, thanks for sharing :)
Beautiful
Ок
Boy that's 6 min. I won't get back .
No that's not it
👍👍👍👍
Fet xe đạp điện xài đã lắm bạn ơi 👍💖
Saya senang melihatnya🤔
Best education coupled with safety requirements,
I am sure that after seeing the tools you are having I assume you are staying in a civilised world. If you Walk into any Gardening tools and equipment store you can pick up a manual sprayer which can be filled with any liquid, detergent, foliage spray etc. and without any necessity to depend on an air compressor you can pressurise the can and spray at will.
Not a safe way to spray anything poisonous. ☠️
МНОГО ШУМА ( ВОЗНИ ) ИЗ НИЧЕГО !!! РАСПЫЛИТЕЛЕЙ НЕ ДОРОГИХ В МАГАЗИНАХ ПОЛНО !!!
Isso não é esprei, é aerossol
مرحبا شكرآ لك
hahahahahaha nice minded👍
patent do NASA👽👍
Il Tempo è prezioso...bisogna organizzarsi meglio!
Concentrati su cose più sicure!
The kit costs 10 times more than the new one
👍
Have you ever heard of a piece of equipment called a vise?
Before cutting into a pressurized paint can, make a small hole to test for pressure and paint.
Absolutely rediculous video...and dangerous.
What kind of an idiot uses an angle grinder with one hand while holding a thin metallic with the other??? As for subjecting a plastic bottle to that pressure is beyond my understanding!
Bonjour.
j'adore tous ces tutos de récup de non gaspillage mais par pitié je le dis à tous: arrêter cette musique à fond c'est horrible ça donne envie de couper. la musique est bien choisie mais pas si forte c'est horrible 🙉 il faut à chaque fois sauter sur le bouton baisser couper le son ou alors ce qui serait mieux c'est d'avoir des commentaires parce que souvent on vous écoute en faisant quelque chose )🤩
par contre merci pour toutes vos astuces anti-gaspi merci pour le monde en évitant de jeter et moins polluer
.malgré qu'on se foute de moi que je récupère beaucoup de choses pour les transformer merci infiniment. depuis l'âge de 20 ans j'adore recycler maintenant ça devient un peu bobo mais tant pis et tant mieux pour la planète .Namasté
🙏
Ps là il faut du mathos quand même !!!!
merci pour vos commentaires détaillés
لطفاً ویدئو های خود را کوتاه و مختصر پخش کنید
can't i go to the garden store and get a sprayer for under $15? yes.
Ок, 20
Muito perigoso tudo isso, não tem necessidade de correr tantos riscos por tão pouco.
Não gostei
Não emtendie nada do gue foi transformado alem do vídeo ser mudo não emtendie nada nessa transformação.
Desmontar uma lata de spray pra fazer outra lata de spray ????? Perda de tempo e trabalho....
Y el resto de la lata?
النتيجة لا تستحق كل هذا المجهود
Cool , l'atomiseur maison
You will have no fingers to throw the can away.....
Wonder if you turn that idea into a mini flame thrower. Dont feel like dying over a curiosity.
Danke für die Commonslizenz!
wow
Eh só colocar o pito para encher o pneu da bicicleta e pronto.
Nguy hiểm, dễ nổ trên tay.
Just one slip.....