I didn't believe it myself! A brilliant idea in 5 minutes from an old iron!
ฝัง
- เผยแพร่เมื่อ 30 มี.ค. 2022
- Lowest price tools with free shipping that I use:
Electric stapler (can hammer - staples, nails) alii.pub/68d2gx
Band saw for metal alii.pub/64k9kx
Cordless Reciprocating Saw alii.pub/5ya5vs
Cordless Brushless Bulgarian alii.pub/5ya60n, ali.pub/4mxfwe
Cordless WRENCH alii.pub/5ya63y
Cordless PUNCH alii.pub/5ya688
Semi-automatic welding machine 3 in 1, cooks without gas, forgot about slag and electrodes ali.pub/59ocb3
Reliable, high-quality screwdriver, for a penny ali.pub/4jnfsh
Welding (inverter) lowest price ali.pub/4jnjp9 , ali.pub/4jnjvh
Great cheap electric jigsaw - แนวปฏิบัติและการใช้ชีวิต
Wow!! And I was just going to throw my old iron out! Then I watched this! Now I KNOW I'm just going to throw my old iron out. 🥺
Зачем же выбрасывать если спираль ещё рабочая то можно последовать совету автора этого канала.
@@user-km3qs6um1g no because pvc glue exist and much better than this.
If you believe that whole activity only took 5 mins then your probably the sort of person who would accept a warm chocolatey drink from Bill Cosby 👀
👍🏴
Si fuera mujer la aceptaba
Вот это КУЛИБИН!👌👌👌
И подача материала зачётная - без лишней болтовни, без душераздирающего музыкального фона!☝👌👌👌
Просто - МАСТЕР-ЗОЛОТЫЕ РУКИ И УМНАЯ ГОЛОВА!!!👏👏👏
"Фока на все руки дока!"👏👏👏
Голова на месте и руки из того места растут! Мужик молодец!
I watched this whole thing with much interest for much longer than 5 minutes and am none the wiser
I had absolutely no idea where that was going till the PVC melt. But it gave me an idea for a Mad Max style weapon LOL
I have no idea what happened at all. The suggested videos covered the last bit.
Вот головастик рукастый! Такие мужики на вес золота. Жалко, что сейчас многие либо мамулькины сыночки руки - крюки, либо мальчик - девочка. В красную книгу таких рукодельников и беречь, беречь, беречь!!! 👍👍👍
Либо женщины бесполезные подстилки!
Хх
Х
Добрый вечер!
Нет ничего нового.
Утюг,остался утюгом, правда без корпуса.
Просто отнял драгоценное время.
Сначала покажи что это, и для каких целей.
Потом собирай.
Чем удивил ?
Am I the only one who does not know what this is ?
That was SUPER FUN to watch
Thanx
Такой утюг у меня отработал 10 лет
Хотя китайский и недорогой по тем временам.
Мастер на все руки!
Hello, Great video. Can you tell me where or what you used for those round metal expanders that attached to the iron that you push the pvc pipe on to.
Thank You
Это ж надо!!!
Бабку без утюга оставлю!!!
Cruel,very cruel 😂😂
я думала блинчики будет жарить
Excelente!! Brillante idea !!!👏👏👏
Please what is it used for? Thank you.
Проще утюг купить для сварки, чем переделывать старый утюг!
Well, that’s 5 minutes of my life I won’t get back again !
8 min
Hahaha! YEP, I don't know why I kept watching it because I knew I didn't have the tools he was using, no matter what he was making out of it!!!!! 😎
БРАВО, МАЭСТРО 👏👏👏
ИНТЕРЕСНО, КАКОЙ ДИАПАЗОН ТЕМПЕРАТУР НА "КОНЦЕВИКАХ" ??
impressive, great way to make something new of something old
Yup ... welcome to the world of up-cycling .. ( ! ) ............ DAVE™ ..........
Excelente vídeo 👍🏼👍🏼👍🏼 like from CHILE 🇨🇱❤️❤️❤️
I don't like throwing things away. But this idea I would walk a mile to throw that thing away.
Exhalant creativity work
It is an iron that is converted into a way to melt PVC pipe ends to piece it together.
Очень "безопасная" Безделушка😅😅😅
Я в восторге!!! 👍👍👍
Для этого 5 минут как пишет нужный целый контора с инструментами и именно такой мужик который может придумать и творить😂
You are so so clever..well done 🙏🙏🙏🙏🙏🥰
❤❤❤❤❤I very much like this your work.
Прикольные, слава труда.
Классная идея.
Incomprehensible
Можно одновременно лапшу сушить, чтоб подошва зря воздух не грела.
Насадки дороже самого паяльника , проще китайца купить за 1300р на месяц хватит, если каждый день паять
Супер, очень понравилось 👍
МОЛОДЕЦ!👍🚩💐
Специально зашла, чтобы прокомментировать твою работу! Как же у тебя хорошо работает фантазия, с тобой в жизни можно быть уверенной, что выход всегда найдешь! 🚩👍👍👍🙋♀
Лайк! 👍🌸💐
I have a very minute knowledge of tools and even though I watched this 3 times, sadly I have no idea what it's supposed to do. Lol
It heats up PVC pipe and connectors and when you put them together they are kind of welded,
PVC glue is better.
Also, the glue is safer as there is no extremely hot exposed plate that someone can very easily get seriously burned on!
@@jfrphoto01 Thanks!
Смотрел и думал, что сотворит? А это полипропилен варить, красава, класс придумка!
Que facil esta caletadora felicitaciones procurare conseguir una plancha Gracias Bendiciones
Please explain what you made. I have never seen this before.
Когда руки и голова на своем месте , молодец
Остаётся мелочь-узнать температуру на втулках:допустимая от190 до 210 град.для полипропилена!Превышение значит брак и потоп
Гарантия
Simple y fácil de hacer, cualquier persona lo hace no creen? Por Dios, pero igual muchas gracias 👍
Smart idea, innovative.
But what is it?
Thankyou. Very good idea. Im gonna make one just like it. You have great tools. I work with a lot of pvc & poly pipe. Don't own a heat gun. I'd also love to know how i can use this iron idea to solder please
A subscriber says he will add a 10mm copper pipe to use for soldering too. I want that too but don't see how it can be done effectively
How about just get a can of glue?
Офигеть! Вот это головаааа! И руки к месту!👍👍👍
Excelente 👏👏👏👏👏👏👏
Wow what a trip!
¡Vaya idea! ¡Muy inteligente!
Hola muy buena idea. Gracias.
Без слов. Просто молодец 👍👍👍
Во как?!😮 😮😮😮😮смотрела,смотрела,не могла понять, что это будет.разгадка была в самом конце.круто,красава
Блин прикольно и просто! А самое главное работает! Лайк!
Как круто👍👍👍зто когда говорят, "Дело-мастера боится!!!
А еще говорят мастер сделал и боиться
Смотрю и жду конца, что же это будет. Пока не увидел втулки от утюга для ПВХ труб так и не догадался. Всё думаю ну что же можно придумать, кроме как вулканизатора дырявых камер. Очень интересная идея. Браво.
Всё равно нужны эти втулки. То есть их надо где-то взять- купить или забрать из комплекта нормального утюга для полипропиленовых труб.
И, кстати, утюг-то почему-то "старый", то есть не работает. А тут вдруг заработал. Значит, не очень старый :))))
И предварительной проверки целостности нагревателя утюга я тоже не увидел.
Я так и не поняла неужели тяжело раскпзать что это
@@user-zj8jn5cd2z Утюг))))))))))))))))
@@burrdozelburrdozel6037 я вижу утюг а что сделали из него ?
@@user-zj8jn5cd2z паяльник для пластиковых труб. В конце же показано применение.
La verdad? Lo miro porque me dio un descanso y me estoy durmiendo ver hacer esto. Lo felicito. En 10 años me saldría este trabajo...😮 en cinco minutos no.
wow! what an idea !!! i think you can save this world from a lot of wastes and apply using them......thanks
Рукастый чувак и с головой дружит спасибо!😡😉
No home should be without one of these. Ready in only a few hours, with the aid of a fully equipped workshop and unlimited scrap metal.
Absolute joke.
😂😂😂😂😂
Increíble muy bueno trabajo felicidades 😉
Я сначала думала что это устройство чтобы ловить "голос америки" 😂
Exactly , what in the hell is that supposed to be, I am clueless!!
It heats up PVC pipe and fittings and basically welds them together.
Here you have a large heating plate exposed, your hand slips and voila, burned hand (most likely both hands), and, very possibly, a large ER bill!
Safer to stick with PVC glue! It gives a better bond without weakening the junction!
Сразу думал что паяльник будет.если для себя,то подойдёт,но если с таким прийти кому-то работу делать, думаю пошлют 🤔
Проще было бы к рабочему утюгу приделать новый провод🤷♂️🤷♂️🤷♂️🤷♂️
Нет слов просто молодец😊😉
The video ended too early. What was the final product? Thank you
склейка , как мы все любим , а показать как нагрел трубы до нужной температуры , не позволяет не работающее "устройство" ?
Тот момент ,когда печной гарметик стоит пол паяльника,а так идея годная,если герметос уже есть,а насадки какимто чудом завалялись.Удачи ,и новых идей.
Не плохая идея с учётом поднявшихся ценников)
500рубл стоит.недавно смотрел.самый простой.правда они не сьёмные
Excelente idea!!!!! Abrazo grande!!
Un peu compliqué pour moi ...😁
Mais beau travail
Super!
Nu m-am gândit la așa ceva.
Merci pour cette vidéo démonstratif vraiment génial merci encore
А как долго проработает утюг без воды?
One word: glue.
И это называется старый утюг при работе спирали?
OMG, I did not look at the date until the end.
Perdón x mi ignorancia, para q sirve ese invento?
Газовая горелка с баллончиком газа и всё для пайки труб. И не надо химичить
Не надо прокручивать трубы во время "склеивания",а за идею ПЯТЬ!✋
ай да молодец.умничка.И все у него по полочкам аккуратно.Мастер.Одним словом .и с головой дружит.Привет из Киева.Обнимаю.Баба Таня
Да, безусловно супер , я бы поставил на край утюга медные кольца для лучшего нагрева !
Я чёт не поняла, что за аппарат получился?😮
Brilliant👌👌👌
Легче готовый купить, чем так заморачиваться
I once had a spare iron that came in handy. I threw it at two fighting cats in my garden at 3am. Hit the one straight on the back from the second floor window and both the fuckers scarpered. I retrieved it the following morning and threw it in my neighbours bin. Do any other readers have any other suggestions on what to use an old iron for. If so please let us know as we are all eagerly awaiting.
Привет Мастеру благодарю за видео зачёт вам...,,,
I have no clue what thus is supposed to be
A pipe joiner
What do you mean? Isn’t it obvious!?! It’s a …
Explique para que sirve eso?? La verdad me quedé confusomy eso que conozco las planchas y creo que el vídeo no termino
Me parece interesante todo el proceso y el resultado, pero es engañoso decir que todo se hace en 5 minutos y además no creo que toda la gente cuente con la herramienta que utilizas.
Favor de ser más reales
OOOHHHHH, I get it now - April Fool’s Day! Very funny!!!!!!!
Eña
Красава!
Когда то я ремонтировал бабушкин утюг и у меня из него получилась, НЕПЛОХАЯ РАКЕТА... 🤔
Такая НЕПЛОХАЯ, что если сказать вам по СЕКРЕТУ; на Землю она, так и НЕ ВЕРНУЛАСЬ 👆🤔
What kind of iron is thi
5 minutes? More like 5 hours.
And that is if you have all the right power tools & a work bench set up. Also, in the U.K it is illegal to do electrical work unless you get it checked by an electrician with a current certificate.
Just buy glue 4 few dollars. Plumbers r not impressed!!!! 2 much work , tools, time, good iron !
Dice 5 min para que nos enganchemos a ver su video ....para colmo con algo tan precario y riesgozo de electrocucion...
😂😂😂. To do a 30 second chore! 😂
@@sarahstrong7174 - nah, that’s not true. You can do a lot of things in your own home. Change sockets, light fittings, etc., you only have to get sign off for full or partial rewiring. If what you said is true there would be no amateur electrical and electronics projects, which of course there are many. Different matter in a work or public place of course.
Молодец. А где брать втулки?
Утюг надо ставить вертикально , будет лучше теплоотдача на рабочии втулки.
А что меняет вертикальная установка утюга?....ни...че...го!
Un super genio❤🙏💕✨️
Lol - the dangerous effort of it all 😱 (Dot)
That's amazing
Waooo.ingeniiso!
Только вчера об зтом думал, а сегодня ты сделал, красавчик, спасибо большое
czarna też jest
Я такой лет 10 назад делал себе, только из советского утюга.