Thanks much! This worked for me, too! I did use CPU/GPU thermal paste in between copper foil tape and CPU. Factory restore, clean slate, start from scratch.
Hi po,, sakin po lg f490l Pag inoopen ko po.. nag rresart sya lagi,, Then need nya naka sak2 sa charger pag inoopen.. Battery po ba sira nun or may iba pa? Slamat in advance
work it po ba yan umiinit ung cpu ng akin at pag naka saksak ung charger nya umiilaw naman ung cp. tapos pag cclick ko ung button habang naka charge late sya mag bukas tapos mag oopen sya hanggang sa battery percent lang kaso na mmatay din sya agad at nag iinit po yung cpu nya? sa tingin mo po maayus pa ba ung akin?
Idol pwede kaya tong gawin Screen na bigla na lang nag white. LG G3 din na unit. Baka kasi pag bumili nang lcd na bago masayang lang. Maraming salamat sa tugod idol
Thanks much! This worked for me, too! I did use CPU/GPU thermal paste in between copper foil tape and CPU. Factory restore, clean slate, start from scratch.
I am happy to know sir, thanks for watching ☺️
Thank you! I did as instructed. LG-G3 WORKS!
pwede po ba copper tape ilagay tsaka graphite sheet?
mas Maganda po
@@SimplyTechKey okay po salamat po sa reply nag tetesting lang kasi ako sa lumang gaming phone ko eh masyado kasing maiinit pag nilalaro salamat
Hi, just wondering, do think it would work to apply a little Artic Silver cpu paste between the heatsink and the cpu/gpu?
much better if you do! I also tried that and surprisingly I got a much lower temperature.
@@SimplyTechKey which is better aluminium or copper and also how the aluminum can stick like that would it work on copper
They are both around the same but I prefer copper
Tinry kona po, nabawasan naman pero mainit parin, ano pakaya pedeng gawin?
Surely a thermal pad will do the same job, no?
What can I use instead of alcohol?
U can use lighter fluid.
But be careful because it is extremely flammable
thanks! works for me G.b
I used 5mm thick aluminum foil and thermal paste
Still it is same
Hi po,, sakin po lg f490l
Pag inoopen ko po.. nag rresart sya lagi,,
Then need nya naka sak2 sa charger pag inoopen..
Battery po ba sira nun or may iba pa?
Slamat in advance
possible nga po na battery po
Thankz po..
work it po ba yan umiinit ung cpu ng akin at pag naka saksak ung charger nya umiilaw naman ung cp. tapos pag cclick ko ung button habang naka charge late sya mag bukas tapos mag oopen sya hanggang sa battery percent lang kaso na mmatay din sya agad at nag iinit po yung cpu nya? sa tingin mo po maayus pa ba ung akin?
U can give it a try po.. pero based po sa sinabi nyo.. mukhang malaki napo sira ng cp nyo po
ganun po ba wala na po ba pag asa maayus ung ganun?
Pwede po ba sya pag masking o scocth tape po yung ginamit ??
Mas maganda kung conductive ng heat mostly copper strip kung meron
tol pilipino ka diba ano tawag dyan sa dinikit mong silver? may nabibili ba online
Pwde ka bumili sir nung pandikit sa butas ng kaldero doblehin mo nalang kac medjo manipis lang yun
D naba babalik yung damage pag ginawa ko to?
This is only a temporary solution.. depends on how you use your device
mas maganda nilagyan monpa ng thermal paste
thanks
Just use thermal paste
Ever wonder why computers use heatsinks? Thermal paste only helps transfer heat to the copper, by itself, it doesn't cool down as efficiently
Gumana ba sha? Di na nag stock logo?
yes sir
Idol pwede kaya tong gawin Screen na bigla na lang nag white. LG G3 din na unit. Baka kasi pag bumili nang lcd na bago masayang lang. Maraming salamat sa tugod idol
Put heatsink before the issue not after the issue? The reason why people even want to use this method is because they have the issue.
Well it is not a permanent solution. If you want a permanent solution bring it to a professional technician to reball the chip .
And '' Prevention is better than cure "
Thanks, Captain Obvious! "Simply Tech-Key" did a lot of people here a big favor, including myself!
Sir can i put toothpaste on CPU
I haven't test it yet. Much better if thermal paste even the cheap once
عربي