hello, thanks for the video. Can you show me how to import txt or csv file in ADS? I want to plot my measurement data directly and compare with my circuit simulation done in ADS. And be able to see if the tuning fit my measurement datas. Best regards
Hai sir I have a Problem on ads As i plot efficiency vrs pin ,it gives efficiency vs frequency. When i use add_ verse option on it, it gives as x axis as frequency and y axis as efficiency, Power What i do ,????
Abhijith, if you're sweeping frequency it shouldn't happen. Try using a design guide, use their amplifier/transistor with yours and set the parameters relevant to your design. For example, use the following to plot PAE: edadocs.software.keysight.com/pages/viewpage.action?pageId=5927645. An example of how to use a design guide is found here: th-cam.com/video/jAtqm-x1GQM/w-d-xo.html&ab_channel=KeysightDesignSoftware
@@MohammadAMaktoomi Thanks sir. The problem get solved. I have another dout. I have designed an RF Rectifier Circuit. Who can i get the layout of that structure. What are the steps required.???
@@muneer296 I think that inorder to design it, thare are design equvation by which you can find the impidance in terms of effective length. From impidance and operating frequency you can find the length and width from linecalc.
@@muneer296 Sorry I was busy grading! Are you referring to the combination of short and open circuit stubs that I have used in my following paper or your question is about general mloc/mlsc components? M. A. Maktoomi, M. S. Hashmi, A. P. Yadav, and V. Kumar, "A generic tri-band matching network," IEEE Microwave Wireless Components Letters, vol. 26, No. 5, pp. 316-318, Apr. 2016.
hello, thanks for the video.
Can you show me how to import txt or csv file in ADS? I want to plot my measurement data directly and compare with my circuit simulation done in ADS.
And be able to see if the tuning fit my measurement datas.
Best regards
Hai sir
I have a Problem on ads
As i plot efficiency vrs pin ,it gives efficiency vs frequency. When i use add_ verse option on it, it gives as x axis as frequency and y axis as efficiency, Power
What i do ,????
Abhijith, if you're sweeping frequency it shouldn't happen. Try using a design guide, use their amplifier/transistor with yours and set the parameters relevant to your design. For example, use the following to plot PAE: edadocs.software.keysight.com/pages/viewpage.action?pageId=5927645. An example of how to use a design guide is found here: th-cam.com/video/jAtqm-x1GQM/w-d-xo.html&ab_channel=KeysightDesignSoftware
Hello sir, how can i design a two single stub( i-mloc & ii-mlsc) networks? And do i use lincalc to find the length of the stubs?
@@MohammadAMaktoomi Thanks sir. The problem get solved.
I have another dout. I have designed an RF Rectifier Circuit. Who can i get the layout of that structure. What are the steps required.???
@@muneer296 I think that inorder to design it, thare are design equvation by which you can find the impidance in terms of effective length.
From impidance and operating frequency you can find the length and width from linecalc.
@@muneer296 Sorry I was busy grading! Are you referring to the combination of short and open circuit stubs that I have used in my following paper or your question is about general mloc/mlsc components?
M. A. Maktoomi, M. S. Hashmi, A. P. Yadav, and V. Kumar, "A generic tri-band matching network," IEEE Microwave Wireless Components Letters, vol. 26, No. 5, pp. 316-318, Apr. 2016.