very professional job!!! Some videos show the hub being pressed in using the inner race of the bearing. You guys used the correct adapter plate that pressed on the outer race of the new bearing. And nice touch of showing the torque specs at the end.
In general, the replacement will be similar, the only thing is that may differ slightly is the design features of your car. More precise information can be obtained in the technical documentation for the car or by contacting the car service.
Just had this done last week on my 2010 V70 at 129,000 miles, my local garage charged £220 inc vat all in, what a relief the noise had become unbearable.
every bolt was overtightened.. then using torque wrench, none of them even moved, they were overtightened by impact wrench.. But otherwise, video was informative. Thanks!
This video provides tips and recommendations that may be helpful while repairing or replacing parts. The video is for informational purposes only and does not provide any guarantee of results.
We cannot show all the nuances and problems during replacement, it is all individual and it is not always possible to solve them at home. To avoid this, we always recommend making replacements at specialized car services.
![Så byter du fram hjullager på VOLVO V70 BW [AUTODOC-LEKTION]](http://i.ytimg.com/vi/9bMhly9DoeM/mqdefault.jpg)
very professional job!!! Some videos show the hub being pressed in using the inner race of the bearing. You guys used the correct adapter plate that pressed on the outer race of the new bearing. And nice touch of showing the torque specs at the end.
Very well done, too bad Volvo doesn’t use better quality bearings
Super nice feuture that you show the torque specs. good work
Very fine.Love from Azerbaijan
Great video!
Does this apply to a S60 2007 model as well? Thx
In general, the replacement will be similar, the only thing is that may differ slightly is the design features of your car. More precise information can be obtained in the technical documentation for the car or by contacting the car service.
Excellent video.!! How many tons is your shop press?
It is not possible to answer your question for sure.
is it ecesary to do brake fluids bleeding, and wheel alignement setting in this case?
Yes, it is recommended to bleed the brake fluid and adjust the alignment
Just had this done last week on my 2010 V70 at 129,000 miles, my local garage charged £220 inc vat all in, what a relief the noise had become unbearable.
@@jasonbrighty5100 No I had no messages come up at all or engine light.There was no play visible at the wheel either but what a racket it made.
@Ian Robertson in the same boat, mine was noted on the mot as being slightly noisy but the drone has fairly increased.
@@Muiry8 Yeah mine got much louder in a short space of time,I can hear the other side starting to go now too.
What size bearing separator have you used at 5.00 minutes
We cannot tell you for sure. You can find this information in the technical documentation for repairing your car.
Hi, any part number for the bearing separator used?
You can find and select the one you need at the link here: www.autodoc.co.uk/spares-search?keyword=Thrust+Piece+Set%2C+press+in+%2F+out+tool
Perfect
Where do you order the parts from for your rebuilds?
Links are in the description below the video.
Good 👍👍👍
every bolt was overtightened.. then using torque wrench, none of them even moved, they were overtightened by impact wrench.. But otherwise, video was informative. Thanks!
This video provides tips and recommendations that may be helpful while repairing or replacing parts. The video is for informational purposes only and does not provide any guarantee of results.
There is no way that spindle comes off or in that strut that easy 😅 I did and was a nightmare 🤦🏼♂️
We cannot show all the nuances and problems during replacement, it is all individual and it is not always possible to solve them at home. To avoid this, we always recommend making replacements at specialized car services.
Wow!