Hello! This looks awesome thanks for sharing. Curious how your cases lid does with the weight of the monitor and router? In looking to do a build soon but am thinking/planning 2 monitors to the lid… but I’m worried the weight will be too much and it’ll want to fall over What did you use to stand-off the wood from the bottom of the case? I found some options but curious what others are using Thanks!
The lid can hold the weight of two small monitors as it hinges slightly beyond 90 degrees. I used a few cut of wood too raise the wood platform up to accomodate the cords etc.
thanks for the feedback - I wish I could elevate the board more but I bought a cheap flat screen TV (instead of a more expensive smaller thinner tablet monitor) and it was too thick to allow me to elevate the board more.
I really like this setup, i do have small one but will go with the bigger one, cox i need room for my router and having a larger TV is not bad probably as PGM or just the multi view. Thanks for sharing. QS: 1. how do you deal with streaming internet in places with weak signals 2. Do you try to send video signal wirelessly to the Atem Mini Pro. I tried using Nyrius Pro+ doesn't work. Kindly recommend if you have any alternatives ✌
I connect ATEM to computer via cat 5/ethernet cable and then computer to cat 5/ethernet cable to internet Netgear router for best connection to internet. I do a speedtest to know upload speed of internet connection. Using ATEM software control - I input the stream key on the Output tab so that I can stream directly from the ATEM using the internet supplied to the computer. Based on the upload speed of internet connection - chose the streaming quality in the ATEM software control on the computer. Hope that helps.
@@kamicaj thanks for your prompt reply. I got the Tv today and place in order for the case and other stuff you listsd. Thanks for sharing your DIY, will share mine when done too
I am so happy with the very good voice rendering without any disturbance
You did an awesome job and i appreciate the immediate connection to the ministry. God Bless you all.
Awesome build! Inspired by you and your ministry!!
Your setup is better then others I've seen. Good job on your project!
thank you. i watched many other video and built what works for us - my church
I love it good work. I like that you saw the idea and made it your own. The key is making it to fit your needs.
exactly - thank you
Hello! This looks awesome thanks for sharing. Curious how your cases lid does with the weight of the monitor and router? In looking to do a build soon but am thinking/planning 2 monitors to the lid… but I’m worried the weight will be too much and it’ll want to fall over
What did you use to stand-off the wood from the bottom of the case? I found some options but curious what others are using
Thanks!
The lid can hold the weight of two small monitors as it hinges slightly beyond 90 degrees. I used a few cut of wood too raise the wood platform up to accomodate the cords etc.
Hey your build looks great...improvements..pass through connectors and elevated board for switcher....
thanks for the feedback - I wish I could elevate the board more but I bought a cheap flat screen TV (instead of a more expensive smaller thinner tablet monitor) and it was too thick to allow me to elevate the board more.
I really like this setup, i do have small one but will go with the bigger one, cox i need room for my router and having a larger TV is not bad probably as PGM or just the multi view. Thanks for sharing.
QS:
1. how do you deal with streaming internet in places with weak signals
2. Do you try to send video signal wirelessly to the Atem Mini Pro. I tried using Nyrius Pro+ doesn't work. Kindly recommend if you have any alternatives
✌
I connect ATEM to computer via cat 5/ethernet cable and then computer to cat 5/ethernet cable to internet Netgear router for best connection to internet. I do a speedtest to know upload speed of internet connection. Using ATEM software control - I input the stream key on the Output tab so that I can stream directly from the ATEM using the internet supplied to the computer. Based on the upload speed of internet connection - chose the streaming quality in the ATEM software control on the computer. Hope that helps.
@@kamicaj thanks for your prompt reply. I got the Tv today and place in order for the case and other stuff you listsd. Thanks for sharing your DIY, will share mine when done too
does that monitor have an hdmi out aswell?
It has 2 hdmi inputs
Well done mate. Now that you’ve built it, what would you do different?
Is there a version 2.0 coming?
No version 2.0. I probably would add a opening in the back of case to pass cables through. And as others suggested better power strips.
How did you mount the tv?
Using mounting screws and washer as if using a tv mounting bracket by pre-drilled holes through the case.
@@kamicaj last question lol. Is there something holding the Atem up or did you make a perfect cut so that it catches the lip of the atem?
@@dantrailmajors2970 no problem. Rectangle cut slightly smaller than the top edge. Rounded each corner slightly. Used basic jigsaw.
nice
Super
Can I buy one?
details of material to build in description - not building for sale - sorry...there are a few others out there that do though.