touchscreen panel repair
ฝัง
- เผยแพร่เมื่อ 25 เม.ย. 2008
- fix your lilliput/xenarc/whatever touch panel with a lighter and a minute or two (brief video because I was in a hurry - if you don't know what I'm doing, you don't need to do it)
- แนวปฏิบัติและการใช้ชีวิต
Worked beautifully without completely disassembling my Garmin nuvi 660. Garmin support said it could not be repaired.. Thank you so much!!!
Thank you for the idea.
I used similar method with a hair dryer on my car dash head touch screen which was not responsive after dismantling it from the car and took out the resistive glass panel. It worked and save me money from buying a new unit. However need to be careful as too much heat can warp the screen and heating the four sides with the metal strips and pressing the sides work better.
Hey, thank you for the hint. I just saved my Brother PR-600 embroidery machine. It had a faulty touch screen where the upper area just didn't receive any touch signals.
During the repairs I used a small crafter heat-gun to warm up the edges and a piece of folded fabric to rub them down.
A new touch glass would cost about 120 USD.
Wooohooo ...... just repaired two China made 5.7" touchpanels. I ordered two samples for my project and both were DOA. Y axis (Y+ and Y-) showed no resistance in between them. heated both the Y axis conductors on panel with my cigarette lighter and both are working now withing 30 secs flat!!!
Useful video. Thanks.
Thank you! I had managed to dent my Sony TX5 = touchscreen kapputt!
Your video inspired me to light a match and put it to my screen. Like magic! It starts working for a couple of seconds. Just enough so i could switch it over to video mode!!! :) So happy right now!
Great tip, i used a t-shirt transfer iron to do the job on a konica c252 touch element, its working again after 25 seconds at 230 farenheit.
damn genius, man. i'd buy you a beer if I could
Helped me fix my touch screen car stereo. Thanks!
Worked great Konica Minolta....Thanks
I really thank you for the video you shared. It was very helpful. I could repair the Touch screen of my Klasspad calculator. Otherwise, the cost was about $ 60. Good luck to you
WELLTRONIC TECHNOLOGY LIMITED
Our products are 4/5 wire resistive touch screen; infrared touch screen; SAW touch screen; touch screen monitor
, interactive touch foils,
Skype: welltronic-sales
Email: alvin@welltronic.cn
Web: www.welltronic.cn
This video helped so much. My 7" Dynamix screen started acting up a few months ago and I couldn't figure it out. Even swapped out the touchscreen controller with a friend's. The digitizer looked fine. After this video I looked closer and found that the one corner was the tiniest bit raised. I heated up the corner with a blow dryer and and pressed it hard till it cooled. Screen has worked perfect ever since.
Hairdryer worked for me. Warmed the screen and the right edge buttons which were problematic work fine now.
Berry, did you remove the screen to do this or leave it in the case?
Your video is very helpful to me. Thank you!
Excelente.. calente con un blower todo el borde del touch screen y fue una belleza!!
deben hacerlo con mucho cuidado... y ya!
I sign up an TH-cam account just to say "Thank you, Morepickles" it works for me.
I just made this and it worked!
Thanks guy!
Hey can u tell me what i need to test the screnns at my self thx???
Thanks for the tip! I just saved a industrial panel😊
can you tell me if you can fix the display for the pa800 that has a stylus
will it work on tab 3 7.0?
hey how did u connect it to a pc?
Great! Worked for the touchscreen of my microwave too. Thank you so much for sharing!
is it necessary to disassemble the glass screen? or can I do it with the glass in place? trying to fix my 2 din car radio. thanks.
can you tell me witch program use for test touch screen panel ?
Would it work for a zeepad 7.0 screen?
Wow! That saved my Kaoss pad! Used a soldering fan
i love you omg
this worked on my Nokia Xpress music
sweet jesus thank you
Can you tell me how you linked that up to the screen? i like the way the computer shows the touch screen responding. Hope you can tell me.
Great video! Can you please tell me which software you used to test the touch panel on your PC and also what board you used to plug it in? Regards
its worked brother.Thanks
I have a lilliput owned it for a couple years and I just installed it in my car. The touch stopped working in a few hours. Is this what I need to do to make the touch function work again? It is currently 100% defective.
Great! it worked for me too!! thank you!
I sign up an TH-cam account just to say "Thank you, Morepickles"
It works for me and save my car DVD player
bravooo. i can waith to test this :)!
Funciona Mi teclado M3 korg estaba mal su touchs . hice lo mismo y sirvió ahora esta super gracias amigo ..por tu video
would this work for my coby kyros 7" tablet that has a few cracks, the screen works just not around the areas where the cracks are? please respond asap bc it has been months now i am searching for a replacement and i cannot find any
I have a Coby Kyros MID7034 . Will this work if i kept dropping the tablet and wanted to repair the screen? Its not cracked it just has trouble when i try to touch something on the screen.
I need help i have a double din touchscreen cd player, everything works fine its just the screen black out.. What do i do?
hey so i got a xenarc 700tsv. i dont know enough about it. but i know its not working when i try to calibrate it. do you know what could be wrong? it recodnised it and worked (sortof) under windows "flick" drivers but it didnt let me do anything with xenarc drivers.
is this what the fix is for?
any info would be great!
will it work on g tide pad6?
it worked thanks a bunch! :)
Did you tried to use heat gun instead? Use of a lighter seams a bit drastic to me. I need to repair toughbook cf18 screen.
jocker010101 How do you think about this think? Is usefull or nonusefull? Please give some advices
works perfectly! just fixed an xperia touchscreen that wouldnt work after a hard fall! thnx a lot!
hi, please can you explain what exactly you do? I need to fix a chinese touchscreen, THX a lot.
Hi, did u know where can i buy a 4 wire touch screen panel for mid701
Will this work for a screen on a Kindle Fire?
thank u sooooooooooo much it fixed my tablet thank u
can i use a hotair instead of lighter?
I have a Thinkpad T410s which came with a touchscreen. I took it off since it makes screen look like grainy. I am planning it to use as a input device. I will connect touch screen to a microcontroller and that microcontroller will connect to laptop as a USB mouse device. I need to know which driver IC is needed to control that touch screen? I dont wanna use the driver in the laptop because that d...
Making the story short I need the T410s 's touch screen brand and controller IC name. Thanks.
sure is not a permanent fix, but it worked 4 me. I checked multimeter and found the wire with infinite resistance (maybe you'll need to know the values of working panel), followed it till its border and heated up 4 a few seconds.
Now you got to press it with ur fingers (don't use too much strenght, you sure will crack it).
If your problem is due to loose contact in the panel, you can fix it this way. Find, before heating randomly the full panel, the side with poor contact and work on it!!
does this work on all kinds of touch screen lcd?
What if i have a plastic screen? Will it work on plastic screen? Please answer.
after warming the touch, did you stretch the plastic with your hands?
how about the screen on a Lowrance HDs 9
hello I have a envy touchscreen cracked and it is difficult to find this part in that way I can fix this laptop 4111-5 sleekbook touchscreen 14 inches ...can you help me in this to were I can find this piece ?....I been in several places and just have a LCD not this part ..help will really appreciate , thanks
影片感覺很有趣的說,馬上按個讚的說
Very useful video
dealextreme 7" touch panel?
if you don't know what I'm doing, you don't need to do it)
Category
Is it working on my iView android tablet? It does'nt do anything if i touch something.
Dont mean to sound stupid, but would this work on the whole screen? I was wondering so I could just fix the cracks on it? If not I'll try other sites and etc.
THNX A LOT BRO! wrkd perfectly bt i did burn my lg viewty screen so it hs a big smal mark but it wrks i thought i wud neva b fixd! thnx
mil gracias lo pude solucionar en una fotocopiadora me anda genial desde argentina gracias
can you explain how it works? i want to do it but i not sure.
will it work for my crashed touch screen?
the idea is to melt it together again...
thanks
where did you get that panel?
I have a broken touchscreen for my canon printer . What can i do
does this works for ds?
i'v got 3 DSlite TS. All wont respond before and after heating.
I see that you heated the outer edge of the touch screen. All there is at this location is two coated traces of conductive silver that are on top of each other creating a capacitive condition. Truly I believe all you really did, without knowing it, was reheat the anisotropic glue containing metal particles where the cable attaches to these traces. What can happen over time is these metal particles in the glue become detached where the cable attaches to these silver traces. Is it possible you can heat near where the cable attaches to the glass next time, and use pressure to make sure these metal particles make contact?
I had lines on my touch screen before. Now ith has gone all white. Now, when i cool it, the touch screen reappears with the lines, but it messes up after a while. how do i get it back 2 normal?
thanks
@kcard707 DSL touch screen replacements are really cheap so you basically got nothing to lose by trying.
should it works on the iphone?
is that ds panel?
For korg m3 totaly not!! still search for solution buy already 2 new glasses still same issue black botton on the right
ooh! so that's how they refurbish stuff! with a lighter. :P
I need this
Can I burn touch screen with the panel [not move digiterzer] ,? I use LCD car my link chevy colorado Thailand.
does it works on ipod touch? :D
GJ, it works
thanks it's work out it's amazing regards t
So, this is the solution? You just put with kind the broken parts of the phone's glass? Please explain me in commentary!
which cable did you use to connect the screen to the computer??
what if use a program on tablet pc with broken dizitizer which shows about it's touchments? and install it and run with mouse(if only tablet pc allows OTG)
Иван Какойнибудевич there are so many types.. manufacturer direct
solutions. 3m. com
good one
how to open a ematic touch screen e8 series
Nice room;p
dude I have sony ericsson vivaz and i tried this method,but with touchscreen fixed to the phone.
and now my whole touch is not working.. ???
what to do now.. help plzz.z. ASAP..
Ola meu amigo.
Como você fez isso, aparecer o touch na tela do pc?
Com um cabo micro-HDMI.
yes it does
Perfect on Nokia N97 mini ;-) Touch OK!!!
Little Caesar's for the win
Can you please tell me What software is that you're using on the computer?
Gracias! Sirvió
how did you connected the touch screen to pc?
+ivan zk using the hdmi output of the tablet to clone the video output.
(you can even try to apply a little pressure on each side with the panel connected to controller and to usb to investigate).
bye
@esnigga people who want perfect eyesight for the rest of their lives
Can this be done on the Samsung GT-S5230? I think that's a plastic touchscreen.
does this work with cracked touches
Sure no
could you just put the fire on the tablet screen and make it work
OK I ma going got try this on the touch screen from a Siemens TP177 Micro. I will use the hot air gun on my soldering station to heat it slightly. I will report back after I try this hack.
been 3 yrs but i'm curious, did it work?