I have the X-PRO 50cc Jiangsu Baodiao scooter, but I'm told by the manufacturer that the engine oil will lubricate the main engine parts and the gear at the same time, because the internal space of my engine is connected...
Hey man,I'm getting a 2017 moped like yours. It has no owners manual, how often do you change gear oil once a season/once a year? And how about the spark plug,or plugs how often do you change those. They don't have a oil filter correct...?? Thanks never owned one before I'm 50 years old going to be pretty fun lol had motorcycles for a long time.
Tactical Evolution Adventures I believe you are incorrect. No dipstick for gear oil. The fill hole for the gear oil is the middle bolt just above the drain on the SIDE of the case.
There is no way you will get 50mph on that 50cc taotao pony, 32-35 max unless you're going down a steep hill. The first oil change is done @ 300 miles than its every 1000km, carb gets adjusted @ 4,8,12km. These bikes are made to run lean so the plug needs to be looked at for carbon build up. The carb jet needles used is a 74 but to set it right replace with a 80. Since the carb is sealed you have to know how to open it to change said needle. Any 50cc can be rode on the road with just a driver's license because they only go an average 30mph, any scooter over 50cc you need to get a motorcycle license.
@kareoluk I would like to try it and see for myself, so what model on carb would have to be used for a Pony50 and if possible a direct link to its purchase.
For a fact , on a flat straight away , I have hit 53mph .. with all stock parts , no modifications what so ever .. I have a friend that owns a new model and his only does around 45mph .. Why I don't know ..
Your video was a waste of my time you showed how to drain but not what gear oil and how to put it in you spent most of the time explaining what the switches are we know that how do you replace the gear oil and what kind?
Thank you for no mess no fuss videos! You saved my ass today with this!
Glad I could help man
Thanks for the vid. My used gear oil smelled like burnt rubber. approx 1500 miles on that gear oil.
Ya that's a lot on a small motor like this
I have the X-PRO 50cc Jiangsu Baodiao scooter, but I'm told by the manufacturer that the engine oil will lubricate the main engine parts and the gear at the same time, because the internal space of my engine is connected...
what oil do you use for ur motor oil and what oil do u use for ur transmission and would it be the same for a tao tao vip???
Hey man,I'm getting a 2017 moped like yours. It has no owners manual, how often do you change gear oil once a season/once a year? And how about the spark plug,or plugs how often do you change those. They don't have a oil filter correct...?? Thanks never owned one before I'm 50 years old going to be pretty fun lol had motorcycles for a long time.
I change it about every 300 to 500 miles or every 6 months. Im not sure on the recommended. It has a oil screen not an oild filter.
Had to reference this video to see if I had the right drain plug bolt. It's the one I thought it was but the bolt seems to be rounded off
Vice grips work for that
What kind of gear oil and how do you put it in that little hole under there?
Around 750 ml and most gear oil comes with a little pour spout on the bottle.
All I wanted to know is how to put gear oil and got a whole tutorial on how to look at my scooter
Sorry
No I'm sorry I'm just been having problems with my scooter and I'm just grumpy I do apologize video was very helpful
@jeremycoates8297 I didn't have a setup to make 1 vid so the other parts tell you more.
good informative video . But theres no way you got it up to 55 mph
You didn't show us how you put the oil back in,
Had problems with video watch part 2
How much gear oil do you use?
I believe it was 750 ml
I have one, it's it's 2015 a Lil bit up now, I think max I got was like 40mph
60 all day after break in and mods
Adjust the valves.owning a Tao Tao you better learn how to adjust the valve tappets
I went into shock the first time I smelled gear oil
Wtf why
You did not show the fill process
My bad. Put the screen and cap back in then fill through the dipstick cap.
Tactical Evolution Adventures I believe you are incorrect. No dipstick for gear oil. The fill hole for the gear oil is the middle bolt just above the drain on the SIDE of the case.
Srry thought it was the vid for the oil change not gear oil.
Tactical Evolution Adventures thanks for the video anywho. MAGA
@@ryankorn5911 yup sorry i didn't make the fill video while i had the scooter.
My scooter is making a ticking noise when I accelerate. Idk if it’s my gear oil, brakes, or wheel bearing.
Where does it sound like its coming from?
Tactical Evolution Adventures I can hear it from the rear wheel/muffler area
@@beeezybone check the gear oil first to make sure uts full. Then check to see if there is metal.flakes in it.
Tactical Evolution Adventures alright thanks. I have a 86 honda aero50 by the way
What gear oil do I use
There is no way you will get 50mph on that 50cc taotao pony, 32-35 max unless you're going down a steep hill.
The first oil change is done @ 300 miles than its every 1000km, carb gets adjusted @ 4,8,12km. These bikes are made to run lean so the plug needs to be looked at for carbon build up. The carb jet needles used is a 74 but to set it right replace with a 80. Since the carb is sealed you have to know how to open it to change said needle.
Any 50cc can be rode on the road with just a driver's license because they only go an average 30mph, any scooter over 50cc you need to get a motorcycle license.
@kareoluk I would like to try it and see for myself, so what model on carb would have to be used for a Pony50 and if possible a direct link to its purchase.
@@howielandry9495 I just got brand new one 2021 no mileage stock and I went 40mph flat ground.
For a fact , on a flat straight away , I have hit 53mph .. with all stock parts , no modifications what so ever .. I have a friend that owns a new model and his only does around 45mph .. Why I don't know ..
Your video was a waste of my time you showed how to drain but not what gear oil and how to put it in you spent most of the time explaining what the switches are we know that how do you replace the gear oil and what kind?
Watch the other parts instead of being an asshole. It says part 1, that Intel's other parts