Fantastic! My first time I saw these type of fletching was in Alaska in the early 1990's and wondered how it was done. Thanks for this video I really enjoyed it.
Thank you sir. I'm familiar with left and right wing, just wasn't sure because it looked like you were using straight. Thanks for the info. I just finished two dozen for practice and deer season (it's coming) this year and wanted to get into true splicing-yours look great!
I've just started making my own wood arrows for my recurve, i used to shoot carbon. I buy pre-finished shafts from 3rivers and fletch 'em up. Next thing i want to try is splicing and maybe cresting. Awesome stuff! Beautiful job!!
Yeah... I bet you are right. I also suspected that the area of the splice is important when they need to interlock. My feathers are from the Eastern Wild Turkey I kill. Even if they don't interlock, they still shoot really well but it'd be nice to get as good as you have become. By the way, I splice out of necessity and not for looks but your arrows look GREAT!!! I saw a guy splice two different woods (walnut and spruce) to make a stunning arrow shaft and it'd be nice to see the two arts of feather craft and wood craft combined. Thanks for the knowledge.
You do want to try to splice in the same general area on both feathers. I've not taken on the splicing of shafts yet. I've seen them done and they looks great but I'm concerned about how strong they are and how much that would affect the spines.
Well sir, at no point during this excellent vid did you mention "dont drop the new feather cutter on your finger tips" Lucky enough I had made 10 incase of such calamity. Thankyou so much for your help.
@bounty764hunter Yes man, i got the red barred divided, the ones i showed b4, but the full feathers im going to do some time later when i get money again lol and about the shafts you have, the cresting do you use a device that spins the shafts?? im new to the cresting i use carbons but as i said before id like to make a doz or 2 of wood shafts,, i like bamboo but the heavy birtch looks good too
Thank you for the video. I have actually done this but not on your level of course. My question is: Does your adaptations match or ZIP well with the spliced or 'introduced' feather? My arrows that I've spliced fly well and look fairly good with NO gaps...BUT they do not interlock with each other and upon hitting hard targets, they tend to need a smoothing down after retrieving them. Also, do you have a video on dying a white feather instead of splicing to get different colors? This would also be interesting and I appreciate the videos you've made.
Yes once I'm finished the feather splices interlock with each other as if they were from the same feather. It has a lot to do with the quality of the feathers that you are using to start with and the care in separating pieces when cutting the splices.
I was just curious about the price of such a detailed hand fletched arrow, I'm afraid they would be too beautiful for me to shoot! I'm hard on the little plastic fletchings!
I use True Flight, Gateway and AMG depending on the colors I am splicing. For this kind of splicing I've found that Gateway and AMG are easier to work with because the quill is left a little thicker than on True Flight feathers. Though if you take your time you can splice True Flight feathers just as good.
Thanks!!! I get my feathers from various places like 3Rivers archery. You need to order Right Wing feathers for a right Helical and Left Wing feathers for a left Helical. Hope this helps.
Thanks for the detailed vid! Keen on trying it myself in my free time now... I can just tell though, I'm gonna nick my fingers so much trying to get the skin off hahahaha
Yes no matter how many feathers you splice there are going to be some mistakes. I seem to make most of my mistakes when I'm trying to make a video......LOL
Hello, my name is Johnnie Cash. I was splicing by just chopping the sections of fletching and shoving them into my clamp. I see the error of my ways now. I was getting frustrated with them not lining up right with the contour of the helical. This solves my issue...
You are very welcome. Yes expect some nicks when you first start out but you will get the hang of it in short order so there won't be too much blood lost.....;-)
That depends on a lot of things. Could be the glue you are using or maybe not enough glue. Splices aren't as strong as unspliced feathers and you will have some fall out form time to time depending on a lot of factors. If they are falling out during the first couple of shots, then it is likely a gluing problem.
I am having the issue within the first 100 shots or so they are falling out. I love to make them and they are beautiful arrows. I will just have to keep practicing :) thanks for the help
TrueBowArcher The smaller the splice the more likely they will fall or be ripped out. 100 shots isn't great though but I've never counted. I generally save my pretty arrows for shoots and practice with some plain janes that are built to the same specs. You might try a different type of glue to see if that helps.
When I was still building arrows I was getting most of my feathers in bulk from Ebay. I forget the Ebay Seller I was using but they were not name brand feathers.
AND I THOUGHT THAT WAS I SPLICING FEATHERS PROPERLY .THANK YOU FOR SHOWING ME THE WAY. YOU ARE EXCEPTIONALLY GIFTED.TU AGAIN.
Very cool...until watching this I hadn't even thought about making my own arrows...Now I'll have to find out more. Thanks!!
Let me know if you have any questions and also I have videos on building arrows from start to finish here on TH-cam.
I've seen Feathers made before but this is an amazing technique. Wow! thank you so much for sharing your knowledge.
Glad you liked the video!!
This is the best video on how to do this I've found! Thank you for allowing me to make the most fancy arrows :)
So glad you like the video and that it helped you.
So glad you made it!
I can just point to your video instead of explaining whenever people ask how I made my arrows. (i.imgur.com/4uOeQWW.jpg)
Love the technique! I was able to achieve great results using your method on my first try splicing. Thanks for all the help!
Awesome, glad the video helped!!
The arrows are beautiful; however your artistry with feathers is unreal.
Thanks for your video
Thank you!!
Fantastic! My first time I saw these type of fletching was in Alaska in the early 1990's and wondered how it was done. Thanks for this video I really enjoyed it.
You are welcome!!! Hope it helps if you decide to give it a try.
That is awesome. Those turned out really nice. Thanks for the video.
You are very welcome and Thanks!!!
Thank you sir. I'm familiar with left and right wing, just wasn't sure because it looked like you were using straight. Thanks for the info. I just finished two dozen for practice and deer season (it's coming) this year and wanted to get into true splicing-yours look great!
I've just started making my own wood arrows for my recurve, i used to shoot carbon. I buy pre-finished shafts from 3rivers and fletch 'em up. Next thing i want to try is splicing and maybe cresting. Awesome stuff! Beautiful job!!
Compliments, very nice feathers!!!
Yeah... I bet you are right. I also suspected that the area of the splice is important when they need to interlock. My feathers are from the Eastern Wild Turkey I kill. Even if they don't interlock, they still shoot really well but it'd be nice to get as good as you have become. By the way, I splice out of necessity and not for looks but your arrows look GREAT!!! I saw a guy splice two different woods (walnut and spruce) to make a stunning arrow shaft and it'd be nice to see the two arts of feather craft and wood craft combined. Thanks for the knowledge.
You do want to try to splice in the same general area on both feathers. I've not taken on the splicing of shafts yet. I've seen them done and they looks great but I'm concerned about how strong they are and how much that would affect the spines.
As I understand it: they may actually be stronger shafts.....and stiffer with the walnut (similarly to carbon). I can see it both ways though.
amazing skill!... you make it look so easy!..sending you love from the uk :)x
Thank you very much from over the pond!! Lots and lots of practice to get good.
Very clear video and well commentated (feel like that's not the correct word). Thanks you for sharing your skill and I have subscribed.
Glad you liked the video and I hope it helps. Thanks for subscribing!!
Well sir, at no point during this excellent vid did you mention "dont drop the new feather cutter on your finger tips" Lucky enough I had made 10 incase of such calamity. Thankyou so much for your help.
Well Done. Congratulations!!! I have a question: What kind glue? Please?
Thanks and I always use Bohning Fletch-Tite Platinum glue.
@@BountyHunterOutdoorAdventures Ok. Much Obliged friend.
@@Horsebows You are very welcome!!
GREAT VIDEO! I am just starting out with doing my own fletching and this was so helpful!
I'm glad it helped!! Give me a shout if you have any questions.
@bounty764hunter Yes man, i got the red barred divided, the ones i showed b4, but the full feathers im going to do some time later when i get money again lol and about the shafts you have, the cresting do you use a device that spins the shafts?? im new to the cresting i use carbons but as i said before id like to make a doz or 2 of wood shafts,, i like bamboo but the heavy birtch looks good too
Thank you for the video. I have actually done this but not on your level of course. My question is: Does your adaptations match or ZIP well with the spliced or 'introduced' feather?
My arrows that I've spliced fly well and look fairly good with NO gaps...BUT they do not interlock with each other and upon hitting hard targets, they tend to need a smoothing down after retrieving them.
Also, do you have a video on dying a white feather instead of splicing to get different colors? This would also be interesting and I appreciate the videos you've made.
Yes once I'm finished the feather splices interlock with each other as if they were from the same feather. It has a lot to do with the quality of the feathers that you are using to start with and the care in separating pieces when cutting the splices.
That's amazing! Thank you so much for sharing!
Thanks!!! Glad you liked.
What do you do if you can't get the skin to pull off the quill? The quill keeps breaking like it's all brittle. Is there any way to soften the quill?
Great video brother! Where do you buy your whole feathers? Will this work for right wing using a helical clamp?
Awesome! Thanks for sharing!
+Willy D You are welcome, glad you liked it.
These feathers are HOT. Nice video and love the intro music!
Thanks!!!
Do you use any glue where the different colors join to help the feather lay straight?
Where do you get the feathers. I've been wanting to experiment with fixing my arrows and this is a great tutorial. Thank you
What kind of feathers do you use?
These are beautiful no doubt about it, but how do they hold up? Also how much would you charge for an arrow like this?
Hi Ron, when done right spliced feathers will hold up just as good as any feather. I'm out of the arrow building business, sorry.
I was just curious about the price of such a detailed hand fletched arrow, I'm afraid they would be too beautiful for me to shoot! I'm hard on the little plastic fletchings!
I was charging $250 for a set of carbon arrows and $350 for a set of wood arrows like these.
where do you get your feathers from
I use True Flight, Gateway and AMG depending on the colors I am splicing. For this kind of splicing I've found that Gateway and AMG are easier to work with because the quill is left a little thicker than on True Flight feathers. Though if you take your time you can splice True Flight feathers just as good.
Thanks!!! I get my feathers from various places like 3Rivers archery. You need to order Right Wing feathers for a right Helical and Left Wing feathers for a left Helical. Hope this helps.
Thanks for the detailed vid! Keen on trying it myself in my free time now... I can just tell though, I'm gonna nick my fingers so much trying to get the skin off hahahaha
I like how you also show some mistakes one is BOUND to make the first time and how to prevent/correct them.
Yes no matter how many feathers you splice there are going to be some mistakes. I seem to make most of my mistakes when I'm trying to make a video......LOL
bounty764hunter
great, this makes this video more valuable for us! Keep it up, love your work.
Thanks!!!
Hello, my name is Johnnie Cash. I was splicing by just chopping the sections of fletching and shoving them into my clamp. I see the error of my ways now. I was getting frustrated with them not lining up right with the contour of the helical. This solves my issue...
Glad it helped!!!
Where do you get the feathers
Great lesson. Thanks.
Thanks Daniel, glad you liked it.
extremely helpful video. thank you
Glad it helped!!
Awesome job.
Thanks you!!
Great video mate!
+Colin Gair Thank you.
great video, i was thinking about a feather that was black\ blue\ black\ blue\ then the rest black again lol
You are very welcome. Yes expect some nicks when you first start out but you will get the hang of it in short order so there won't be too much blood lost.....;-)
Still not making arrows ?
Yes, I'm still not making arrow because I'm tournament bass fishing. As much as I love archery, bass fishing has always been my true passion.
That’s amazing!!!
Thanks
I am having the issue that the splices are falling out. Any suggestions?
That depends on a lot of things. Could be the glue you are using or maybe not enough glue. Splices aren't as strong as unspliced feathers and you will have some fall out form time to time depending on a lot of factors. If they are falling out during the first couple of shots, then it is likely a gluing problem.
I am having the issue within the first 100 shots or so they are falling out. I love to make them and they are beautiful arrows. I will just have to keep practicing :) thanks for the help
TrueBowArcher The smaller the splice the more likely they will fall or be ripped out. 100 shots isn't great though but I've never counted. I generally save my pretty arrows for shoots and practice with some plain janes that are built to the same specs. You might try a different type of glue to see if that helps.
Great, taking your time and lots of practice and your splices will look as good as mine. Let me know if you have any other questions.
Good Job !!!
Thanks!!
After watching your video,
I will buy them pre made if I want a multi colored Fletch.
I understand, but I will have to say after just a little practice you can do this pretty easily so don't under estimate yourself.
Excellent Video, makes sense now. I spliced some for a dozen arrows before this video and they came out far from what I see here.
awesome! I'm splicing next weekend
Great job!
SUPER VIDEO!!!
Thanks!!
Thanks, glad you liked it and hope it helps you out.
Awesome, let me know if there is any way I can give you a hand.
You make it look easy, but I know it's not. Thanks for the lesson.
wow thank you for the video
You are very welcome!!
Good luck and let me know how it goes!!!
Very cool. Thanks
Thanks and glad you liked!!
Thanks and I hope the video helped if you give it a try.
Thanks
this is cool!
@jonneyj hope it helped you with your splicing. When you get done with your feathers send me a picture at bhtamail@verizon.net
amazing,thanks you!!!
Thanks you so much!!!
@shbmw2 Thanks!!!!
Thanks!!!
Black, white and neon green. I will take 36 please sir!
+gblan Sorry, I'm no longer selling arrows and feathers.
Would be better if the music did not compete with your verbal directions
And I thought I spent a lot of time on my arrows, lol.
Yes, they were very time consuming.
Sorry the hear about your finger. Hope it wasn't cut too badly!!!
What brand of feather do you use ?
When I was still building arrows I was getting most of my feathers in bulk from Ebay. I forget the Ebay Seller I was using but they were not name brand feathers.