Wish you had a video on a kawasaki mule fxt pro. I just received your kit but no video to help for it 😢 I'm sure I'll figure it out but wish that tool was available.
Sounds like you're using a kit built since January 2019 (instructions have a date in bottom right corner of each page). We updated the rear harness to connect directly to each taillight connector. The rear connector on the driver side near the rear wheel is no longer used.
The main power for our kit needs to be connected to the terminal marked “acc”. My guess is you have our power wire connected to the battery terminal. Call Roy at 801-691-3415 and we can discuss further.
There is only a couple things I would like to see added. A piece double sided tape on the self canceling relay to make the mounting of that a little easier/neater. I went and bought some. worked good Also a longer red wire coming off the power ground fuse harness. So the fuse can be mounted on the outside of the firewall. Besides that it’s a well thought out kit. With clear and humoress instructions.
@@rycomotorsports4361 thank you for replying quickly to my response:) I will add an update when I received the kit, and let the viewers know how it turned out. 12/13/19...........…............... Edit: turn out well love the back brakes light, how they strobes six times before the brake light illuminates.
Do you have a video of a full install on a Maverick max X3
Wish you had a video on a kawasaki mule fxt pro. I just received your kit but no video to help for it 😢 I'm sure I'll figure it out but wish that tool was available.
Great video and Thank you so very much for you help. I could not have installed this on my turbo S without your and Roy’s help.
I can’t seem to find my passenger rear connector for the brakes. 2018 RZR HLE. Maybe I’m blind? I found the driver side one.
Sounds like you're using a kit built since January 2019 (instructions have a date in bottom right corner of each page). We updated the rear harness to connect directly to each taillight connector. The rear connector on the driver side near the rear wheel is no longer used.
I’ll check the instructions and verify. Thank you!
Great Video, just installed mine while watching and had 0 problems..... A++
My fangs only stay on and won’t turn off unless unplugged
The main power for our kit needs to be connected to the terminal marked “acc”. My guess is you have our power wire connected to the battery terminal. Call Roy at 801-691-3415 and we can discuss further.
Where does the plug and play adapter go?
That component is used on the models with the Polaris Pulse system, such as the RZR PRO XP.
There is only a couple things I would like to see added.
A piece double sided tape on the self canceling relay to make the mounting of that a little easier/neater. I went and bought some. worked good
Also a longer red wire coming off the power ground fuse harness. So the fuse can be mounted on the outside of the firewall. Besides that it’s a well thought out kit. With clear and humoress instructions.
Does this kit come with the hazard features on the turn signal lever?
Yes, the red lever on the turn signal switch activates the hazards.
@@rycomotorsports4361 thank you for replying quickly to my response:) I will add an update when I received the kit, and let the viewers know how it turned out.
12/13/19...........…...............
Edit: turn out well love the back brakes light, how they strobes six times before the brake light illuminates.
Video for Kawasaki please!!!!