2019 Ranger XP 900, I just installed this kit last night. I am reasonably competent in the garage 7/10 i'd say, but I hate electricity, zero skill there. I needed the 3 wire kit for my machine, install was incredibly easy, I thought I would have to take the top cover off my dash, but only two screws took the middle switch panel out and that was all I needed. Everything was the perfect length and plug and play save one wire you need to cut and splice near the driver side tail light. This was incredibly easy with the included quick connect. Project took me about two hours, but I was really taking my time and looking things over. Could not be happier with this product. I also have the backup light from this seller, been working solid for two years and I love that too. Edit: A friend attempted to order this same kit, but there are many results now when you simply google "No hole turn signal kit." He got the wrong seller and has had a truly awful time. At one point the host thanks "Barry" make sure Barry is in the name of the ebay seller ID.
I vaguely remember watching one if your turn signal installs using a kit that included a pigtail for a third brake light and license plate as well. Do you happen to remember which kit that was?
Thanks for the vid. How well does the adhesive hold up. My experience w adhesive is it fails with heat and water. Also, can the signals be placed on the top portion of the molding just under the Polaris name without any issue?
Just installed mine on a Ranger 1000 Northstar. First off, polaris push pin rivets suck for us old people...You were a little vague on the wire routing up front but I think I got it. Everything works fine, even got it all reassembled....Thanks bunches.
Sure no problem. www.ebay.com/itm/POLARIS-2018-20-1000-NEW-STYLE-RANGER-XP-SINGLE-CAM-NO-HOLE-TURN-SIGNALS/283049656788?hash=item41e71301d4:g:KVcAAOSw~vpaNB5m
If you bought this kit on ebay he sales replacement lights. Just type in Polaris turn signal kit and it should pop up. Barrycomputers is the vendor name.
I got the 8 pin harness for my 2021 polaris crew xp 1000 northstar ultimate and it it worked perfect, no drilling or splicing wires. Using this harness, how do I get the turn signal indicator lights in the cluster to work. When I turn the key on it shows the indicator lights are in the cluster but does not work with harness
There should be two wires that plug into the main instrument panel connector. My kit is very similar and the only instructions was a music video that showed things being hooked up with no voice explanation 🙄
@@nathanyoder499 I think he does but you can double check with him by messaging on Ebay. www.ebay.com/itm/POLARIS-2019-22-NEW-STYLE-RANGER-1000-CREW-XP-SINGLE-CAM-NO-HOLE-CHROME-SWITCH-/284254843948?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
Yes it's like your rear lights on the ranger that come on when running. Then when you put your turn signal the amber light flashes. Its really cool looking.
@@UTVDIRT I hunt hogs in mine. I drive blacked out and use special green lights. Would it be simple to unplug the front LED lights? Then just plug back in when done hunting.
@UTV DIRT love your channel, very good content and info. I have a 2019 North Star, will this signal light kit work? I showed my wife and she now wants that kit on our Polaris. Thanks
I just bought this kit for my 2020 crew. Is there a reason this has to be run under the chassis? Is it possible to run everything through the main firewall plug/hole? Instructions that come with the kit aren’t very good, so your video is a HUGE help! Appreciate your advice.
@@UTVDIRT once I got to installing it, I realized that my question didn't really apply and it all "clicked" (light bulb moment). Anyways, thanks for the tip on the kit, that was one of the easiest installs ever. Made it fun actually. Installing on the crew came with it's own intricacies, but nothing major. Awesome product ;)
i see the lights like yours but it says its for a 500 ranger i cant find the same lights for the 1000. I see one for the north star 1000 xp with ride command but we dont have ride command
I just checked and it looks like he is out of stock right now. You can message Barry on Ebay and he will get back to you and let you know when they will be available again or you can check back in a coupe of days on Ebay.
Thanks for the great videos. We've installed this turn signal kit as well as the back up light and led light bar. Everything works great and the videos helped a great deal. Looking forward to more …
UTV DIRT thanks! Just got ours today going to install it this weekend. Also getting our led headlights from your other video. Putting it on our 19 nortstar!
I found one for a general crew. But it doesn’t say if it will work for the Ranger crew. Didn’t know if maybe anybody on here has an answer if the one for the general crew will work for the 1000xp crew. Thanks
I dont think he offers one for a Nb style xp 1000 crew unless you have a Northstar. It looks like he has one for old body style xp 1000. You could always message him on Ebay to see if he can make one or have one that fits your unit.
I’ve been binge watching your Polaris videos. Getting ready to get my 2020 NorthStar ready for street legal inspection. I’m in Ohio too! Whereabouts are you! I’m in Salt Fork area!
Purchased this kit for my 2019 Ranger XP 1000 EPS RideCommand Polaris Pursuit July 2019, had to send it back for a eight hole plugs due to the RideCommand. barrycomputer-LLC was great about the return and explained I needed the same one as the North Star uses. So, if you have RideCommand you will need the eight hole plug and play not the six hole. I could not be happier with these turn signals and the quality! This guy is a perfectionist! Thank you for this product! And thnaks again to UTV Dirt for your very helpful and informative video's.
Here is a link for the the product. Thanks for watching! www.ebay.com/itm/POLARIS-2018-21-1000-NEW-STYLE-RANGER-XP-SINGLE-CAM-NO-HOLE-TURN-SIGNALS/283049656788?hash=item41e71301d4:g:KVcAAOSw~vpaNB5m
Like the videos you guys are putting up. My question is do the led lights always run like a daytime running light or will they shut off? Like the chaser effect on the turn signals.
2019 Ranger XP 900, I just installed this kit last night. I am reasonably competent in the garage 7/10 i'd say, but I hate electricity, zero skill there. I needed the 3 wire kit for my machine, install was incredibly easy, I thought I would have to take the top cover off my dash, but only two screws took the middle switch panel out and that was all I needed. Everything was the perfect length and plug and play save one wire you need to cut and splice near the driver side tail light. This was incredibly easy with the included quick connect. Project took me about two hours, but I was really taking my time and looking things over. Could not be happier with this product. I also have the backup light from this seller, been working solid for two years and I love that too. Edit: A friend attempted to order this same kit, but there are many results now when you simply google "No hole turn signal kit." He got the wrong seller and has had a truly awful time. At one point the host thanks "Barry" make sure Barry is in the name of the ebay seller ID.
I vaguely remember watching one if your turn signal installs using a kit that included a pigtail for a third brake light and license plate as well. Do you happen to remember which kit that was?
Does your taillights stay on all the time your ignition switch is on?
Can’t find on eBay the exact kit you installed. Can you post a link for me. Thanks!! Love your page.
South Creek Outfitters type no hole plug and play turn signal kit
Thanks for the vid. How well does the adhesive hold up. My experience w adhesive is it fails with heat and water. Also, can the signals be placed on the top portion of the molding just under the Polaris name without any issue?
will this kit work on my 2021 ranger 1000 eps, i dont have the xp
Just installed mine on a Ranger 1000 Northstar. First off, polaris push pin rivets suck for us old people...You were a little vague on the wire routing up front but I think I got it. Everything works fine, even got it all reassembled....Thanks bunches.
No problem. Thanks for watching!
Will this fit a 2016 900xp Polaris ranger
Found on eBay really fast. Thanks for the video and recommending this.
No problem. Thanks for watching!
How does that 3M adhesive tape hold up? I live in N MN and with our cold winters I am concerned with the lights coming off?
THX
No problems at all. Once they are on they ain't coming off.
i was wanting to purchase a street legal kit like yours and i am not able to locate it, could you post the link for me
Sure no problem.
www.ebay.com/itm/POLARIS-2018-20-1000-NEW-STYLE-RANGER-XP-SINGLE-CAM-NO-HOLE-TURN-SIGNALS/283049656788?hash=item41e71301d4:g:KVcAAOSw~vpaNB5m
Who made this kit? Mc Adventures?
Are you running all those lights of one battery?
Yes just the one battery.
What number pin ? 4 or 8 pin ?
Thanks in advance.
Do the marker lights stay on by them selves as shown in bigining of video
Yes they are like running lights.
This kit looks cool. I had an ez kit on my 900 but I'm hesitant to drill holes into the 1000s painted plastic
Yeah it's a nice kit just installed another one on my new Ranger.
what brand is this turn signal kit looking for replacement light had one quit working
If you bought this kit on ebay he sales replacement lights. Just type in Polaris turn signal kit and it should pop up. Barrycomputers is the vendor name.
Is it possible to wire this kit to a rocker switch? Not a fan of the chrome turn signal mounted to the steering wheel.
I believe he sales a kit with the rocker switch option but double check.
You can get the turn signal switch in chrome or black. Specify when ordering.
What company is it?? Need this for my Ranger XP900 2016 it's a northstar as well. Help!!
Go on to Ebay and type in the search bar Polaris no hole. It will pop right up.
UTV DIRT do you think it would work on 2016 ranger Xperia 900?
I would message the seller on Ebay and ask if he has a kit for your unit.
Do the green arrows in the dash work also?
No not in the dash cluster but the turn signal switch on the steering column lights up by the lever.
Can this Street Legal Kit be installed on the 2020 Polaris Ranger Crew XP 1000. If so where can I buy it?
Yes and I bought it on Ebay. Just type in polaris turn signal kit and it should pop up.
Has the turn signal switch stayed tight on the steering column? Had any issues since installing this kit?
No issues at all. It's a good kit and easy to install.
I got the 8 pin harness for my 2021 polaris crew xp 1000 northstar ultimate and it it worked perfect, no drilling or splicing wires. Using this harness, how do I get the turn signal indicator lights in the cluster to work. When I turn the key on it shows the indicator lights are in the cluster but does not work with harness
I would check with Barry. You can message him on Ebay and he will get back to you.
There should be two wires that plug into the main instrument panel connector. My kit is very similar and the only instructions was a music video that showed things being hooked up with no voice explanation 🙄
Arn't you worried about the place you mounted the front ones on, because that piece can be removed to get at the radiator?
They are not connected to the grille piece that pops out to clean the radiator. They also have quick disconnect ends to unhook if needed.
@@UTVDIRT Are you sure about that? it sure looks like it; cause you show the piece in your hand and where your mounting them
I know its been awhile since you installed the turn signals. How is the frt straps holding up. Are they still stuck good or have they come loose.
They never came loose. Worked great!
@@UTVDIRT Thanks for the update. Keep up the great videos.
Can the kit you have be bought in Ireland/uk ? It looks a whole better than any of the ones I have seen on eBay over here.
Not sure look him up on ebay. Barrycomputers
Awesome instructional video coupled with a truly great plug and play product. Thanks guys.
Thank you! It's a nice kit and would buy it again for my next unit. Thanks for watching!
@@UTVDIRT does he have some for the regular Polaris ranger 1000 not xp 1000
@@nathanyoder499 I think he does but you can double check with him by messaging on Ebay. www.ebay.com/itm/POLARIS-2019-22-NEW-STYLE-RANGER-1000-CREW-XP-SINGLE-CAM-NO-HOLE-CHROME-SWITCH-/284254843948?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
How are these working after so many months of use?
They work great. No issues at all and is a very nice kit.
Will this fit a 2022 Polaris 1000 Crew? Thanks
Go onto Ebay and type Polaris turn signal kit and it should pop up. The vendor is barrycomputers.
How long did it take you to install the turn signals?
Probably 1-2 hours taking your time.
Great video. I just went on ebay and ordered the set. How do I order the reverse light?
The same company offers the back up light. Just look under his seller information or you can message him on E bay.
I just got a Ranger 1000 Camo Love your vid's
Do the brake lights still work with this kit?
Yes they still work. You have rear running, blinking, and brake light.
Are the front LED turn signal lights on anytime the key is on?
Yes it's like your rear lights on the ranger that come on when running. Then when you put your turn signal the amber light flashes. Its really cool looking.
@@UTVDIRT I hunt hogs in mine. I drive blacked out and use special green lights. Would it be simple to unplug the front LED lights? Then just plug back in when done hunting.
Yes the 2 front LEDs just unplug from behind the grill.
@UTV DIRT love your channel, very good content and info. I have a 2019 North Star, will this signal light kit work? I showed my wife and she now wants that kit on our Polaris. Thanks
Thank you! Yes it will work on your Northstar!
Can I get just the led lite bar rather than round lite
Not sure what you mean. Explain more.
I just bought this kit for my 2020 crew. Is there a reason this has to be run under the chassis? Is it possible to run everything through the main firewall plug/hole? Instructions that come with the kit aren’t very good, so your video is a HUGE help! Appreciate your advice.
I don't see why you cant as long as you have the room and the wire is long enough.
@@UTVDIRT once I got to installing it, I realized that my question didn't really apply and it all "clicked" (light bulb moment). Anyways, thanks for the tip on the kit, that was one of the easiest installs ever. Made it fun actually. Installing on the crew came with it's own intricacies, but nothing major. Awesome product ;)
@@RaulGonzalez-fu1yb Nice! Barry has some nice products. Check the reverse light if you dont already have one.
@@UTVDIRT Cool, I'll check that out
@@RaulGonzalez-fu1yb Check the out vid on the channel it was one of my first mods and least expensive.
i see the lights like yours but it says its for a 500 ranger i cant find the same lights for the 1000. I see one for the north star 1000 xp with ride command but we dont have ride command
I just checked and it looks like he is out of stock right now. You can message Barry on Ebay and he will get back to you and let you know when they will be available again or you can check back in a coupe of days on Ebay.
Is the install on the 2020 any different?
No its basically the same unit. Polaris hasn't change much.
Thanks for the great videos. We've installed this turn signal kit as well as the back up light and led light bar. Everything works great and the videos helped a great deal. Looking forward to more …
Nice! Glad I could help. More vids on the way. Thanks for watching!
Trying to fine no hole turn signal kit can't find it can you help fine it and horn kit
www.ebay.com/itm/POLARIS-2018-21-1000-NEW-STYLE-RANGER-XP-SINGLE-CAM-NO-HOLE-TURN-SIGNALS/283049656788?hash=item41e71301d4:g:KVcAAOSw~vpaNB5m
Thanks for helping me install my street legal wiring.
No problem!
Did you have to mount your turn signal kit at a 45 degree angle?
On the steering column?
You can see where I mounted it in the video at 6:59.
UTV DIRT thanks! Just got ours today going to install it this weekend. Also getting our led headlights from your other video. Putting it on our 19 nortstar!
Nice! Both mods are great upgrades. Thanks for watching!
Did you figure it out. Got a message from you about it not fitting on your steering column.
I found one for a general crew. But it doesn’t say if it will work for the Ranger crew. Didn’t know if maybe anybody on here has an answer if the one for the general crew will work for the 1000xp crew. Thanks
I dont think he offers one for a Nb style xp 1000 crew unless you have a Northstar. It looks like he has one for old body style xp 1000. You could always message him on Ebay to see if he can make one or have one that fits your unit.
Thanks a lot.👍🏻
what if you have ride command installed do you by pass ride command?
Yes I believe so it has nothing to do with ride command.
@@UTVDIRT hey thank you for the info.
No problem
Having trouble finding the kit with lights like yours. Could help with a link? thanks
Here is the ebay item #283049656788. Just type that in the ebay search bar and it will pop up.
@@UTVDIRT hello. I have a 2017 polaris ranger 1000xp do you have the light kit that will fit or will the 2018 fit m thanks
@@UTVDIRT 283049656788
@@jaychambers669 Try and contact the seller and see if he makes a kit for your Ranger. Here is the link. Thanks
www.ebay.com/usr/barrycomputers-llc
I’ve been binge watching your Polaris videos. Getting ready to get my 2020 NorthStar ready for street legal inspection. I’m in Ohio too! Whereabouts are you! I’m in Salt Fork area!
Nice! I'm in Canfield Ohio.
@@UTVDIRT I know it well!
Can't find this same kit any where? Help
You can find it on Ebay. Just type in polaris no hole turn signal in the search bar and it should pop up.
Can you get this kit anywhere else besides eBay? Will this kit work on a 2022 Polaris Ranger 1000 Premium?
This kit is only sold on Ebay. I believe he makes kits for different model Rangers.
Purchased this kit for my 2019 Ranger XP 1000 EPS RideCommand Polaris Pursuit July 2019, had to send it back for a eight hole plugs due to the RideCommand. barrycomputer-LLC was great about the return and explained I needed the same one as the North Star uses. So, if you have RideCommand you will need the eight hole plug and play not the six hole. I could not be happier with these turn signals and the quality! This guy is a perfectionist! Thank you for this product! And thnaks again to UTV Dirt for your very helpful and informative video's.
Barry is a good guy. Love his products!
What is the name of Barry's company? Would like to find this exact kit. Multiple people on ebay. Thanks in advance.
Here is a link for the the product. Thanks for watching!
www.ebay.com/itm/POLARIS-2018-21-1000-NEW-STYLE-RANGER-XP-SINGLE-CAM-NO-HOLE-TURN-SIGNALS/283049656788?hash=item41e71301d4:g:KVcAAOSw~vpaNB5m
Thank you very much!!! Great job on the video too!
@@UTVDIRT Page is no longer there.
@@fmcbill www.ebay.com/itm/284291018570?hash=item423110af4a:g:o3sAAOSwwkdgmpGx&amdata=enc%3AAQAIAAAA8Ogwztz8S53WQ%2FYrwGuPPSQ7GDAtWoHW0AuJFWL5COBjaCwTPj5oCvLzstVjr8YSDof2HvsR5MdSaswk%2BqmNoKcnT%2B3XKbpWGrvAsY1RilGHxJ0lBSUvPvYR3QlaAPmlGl6daokPr4rkqutsqIUmjl0aRB427STPo%2Bj9w2OGnqtFEC6n9oVPaUI3bZ6yyb6%2BL4sYR85w1J4I19CT1tjmJOGIaTvyLLZrp1qj0CuzfqPEpgihyWdVATTcvhZpL2kQ4dhC6vYHvlehk6Xg3IgtFQbbMqaS4zTQeltyT2xlJaG56U83MabL0CAeeeP5PzLY%2Fg%3D%3D%7Ctkp%3ABFBMiLnntopi
Like the videos you guys are putting up. My question is do the led lights always run like a daytime running light or will they shut off? Like the chaser effect on the turn signals.
They stay on all the time like day time running lights.
@@UTVDIRT Thanks for information...like the plug and play but not sure about the daytime running light feature. Hmmm
Thank you appreciate you making this video.
No problem. Its a very nice turn signal kit and is well made.
Nifty, looks like the KITT car.
Thanks!
Just ordered mine
Nice! I really like how they light up when you turn your machine on. It reminds me of the Polaris turbo s fang lights. Very nice kit!
Thank you
Nice kit but the kit I got was 25$ another 20 for extra wire solder and heat shrink
Nice! I am all for saving money. Thanks for watching!
Does this kit also work with the OEM dash signal indicators?
Does the dash (factory indicator lights) blink to let you know the turn signals are on?
Do you have to change the original tires that the polaris 1000 ex eps comes with in order to make it street legal?
It depends on where you live. I would check your local laws. I didn't have to change my tires but I live in Ohio.
So did this system work with your factory dash instrument display?
No it doesn't show the turn signal light in the cluster.