Using the ESU Programmer (Roco 60972 Vectron).
ฝัง
- เผยแพร่เมื่อ 28 มิ.ย. 2024
- I still did not have the body flush in one corner in this vid, the body must sit flush in all four corners ,also the corner buffer beams must push in all the way as these parts are removable and can slip when removing the body.
- บันเทิง
Wow... quite a system there, Jim! Very cool!
Fascinating Jim thanks, for the video. Deryck 👍
Well Jim, you have a wonderful setup and a very thorough approach to the installation. Great video, Jersey Bill
Hi Bill , many thanks.
Hiya Jim . Great Video again . A Vectron Last mile has a Diesel Engine . Used for shunting into a yard without Catenary . Your Vectron is an absolute Beauty . The sounds sound awesome . Looking forward to the next Video . Hope you get well soon .
Many thanks, I had no idea, I think there is a diesel generator function on the sound file also..
Many thanks for watching and your information.
Jim
Hi Jim, I told you everything well and showed you it's interesting to learn thanks for the video, good luck in the next video💯💯💯💯👍👍👍👍
Many thanks for watching..👍🏻
Nice loco 👍 and a great how to video 👍👍 just wish that ESU weren’t so expensive, then I could afford to sound fit all of my locos. 😊
Thanks for watching! They are very expensive, I've never had any fail yet over 15 years ,I've destroyed about 5 up to now with errors installing which was my own fault .
The cheapest place is Coastal Dcc for decoders and customer service etc..
excellent upgrade!
nice one Jim cv 3 and 4 to 0 for train controller
Hi Al , hope your doing good, Sorry what were those adjustments for.
@@hovermotion setting cv 3 and 4 to 0 lets train controller control the start and stop speed set these up first before you speed profile and all you locos will stop mm perfect mate any probs with it give me a shout I also set cv 5 to max which is max speed then set the loco speed in tc
Hi Jim, May I pick your brains. I have just purchased an Accurascale 66, I have a lokpilot5 ESU Decoder Non Sound.from ACC, Which was originally for a Class 37, This apparently is a dedicated decoder for the 37. Says on box. I put this in my 66 it runs but only have lights in one direction, Can this be reprogrammed to the 66, and if so would you know who can do. There not in stock anywhere at the mo. Many thanks Stuart
Hi Stu ,
if you reset the decoder of value 8 to cv 8 this should slove the problem, the cv list on the 66 may have default light settings.
@hovermotion I'll give that a go Jim. I have ordered a decoder from Accurascale, So nothing to lose.
Good one Jim...you still don't sound 100% though.
Thanks
I am no where near back to normal but I have to go in work tomorrow just to show my face and try my best.