The CHEAPEST Glue Applicator (Super Precise!)
ฝัง
- เผยแพร่เมื่อ 28 มิ.ย. 2024
- Please consider supporting me on Ko-Fi :)
ko-fi.com/cuttransformglue
Hi everyone!
This is a video tutorial on how I make my CA glue dosers! I hope this video is help full for you! Stay safe!
---
Wanna see photos of the builds earlier? Follow me on instagram: / cuttransformglue
---
Tracks used in this video:
Two words by Uncle Milk - under CC BY 4.0
freemusicarchive.org/music/Unc...
creativecommons.org/licenses/...
---
Shot with a Canon Eos T3i (600d)
Off Sound Record with a BM-800 through a Scarlet 2i4
Edited in FCPX
---
#tutorial #scratchbuild #glue - แนวปฏิบัติและการใช้ชีวิต
In addition to enjoying your build videos, I must say you do a great job teaching your technique. Thanks for the clear explanations and up close videos!
Thank you so much!
Great hack! I have some syringes I want to try for CA glue too. Also see if it stores in them ok as well.
For those that can't get plastic "Q-Tips" (they are available in some cheap off-brand ones). Perhaps try the ink tube out of ball-point pens or the feed tube from a spray bottle. Or the tiny straws that come with juice box type drinks. If you're really desperate, I'd be small heat shrink would work. Get the smallest you can. Wax a thin piece of wire and put it inside the heat shrink. Stick something like a wood dowel, also waxed, the size of your bottle tip, in one end to keep it sized to fit the bottle. Shrink the tube and pull out the wire and dowel (this is what the wax is for). You may even be able to do CTG's technique of stretching the heat shrink tube while keeping each end open with said wood dowel, metal tube/solid, or plastic tube.
.....Or if you can, buy them by the 10 to 100pc pack online. :)
I was actually about to ask, just before I found this video!
Exactly the same for me!
This is a wonderful tip and tutorial, I'm always cursing at the glue bottles for clogging or overflowing no matter how carefully I use and store them.
Thank you for the insight, I'm sure this will come in really handy :)
Thanks a lot for watching buddy, hope this helps you :)
A fabulous tutorial [as always]. Your inventiveness knows no bounds. Thank you )O(
This is a brilliant idea! Just this evening I've been using CA glue, and cursing about how too much glue comes out of the bottle, so this is a very timely tip for me. Thank you for your advice and tips.
Thanks a lot buddy, I'm happy to help :)
Just came here to thank you for this great tutorial.I did this minutes ago and it turned out very well!Thanks again!Keep sharing your amazing art!
Oh, so good to hear that! : DDD
You are brilliant my friend. Nice tip for us, Thank You for sharing.
Thanks a lot buddy!! And thank you for watching!!
You're a life saver. I was about to ask you on this glue tip. Many thumbs up. And thank you.
Nice! I'm happy to help :)
Excellent you got a thumbs up at 34 seconds, well done Esquire
I've recently seen similar on model kit sprues/plastic cutlery and stretching them into small rods/antenna, but I would have never thought of applying it for this. Amazing idea, thanks for sharing!
This can be very useful at times. Thanks for sharing.
That is a really neat idea! THanks for sharing this.
What a brilliant idea
Huge win, thanks for your knowledge and expertise!
Really clever idea!!! Thanks for sharing.
Very innovative resourceful and creative!! Love it!!
Thanks a lot!
This man also works as the right hand of god, this is amazingly useful
hahaha thanks buddy!
DIY q-tip hack . . . priceless! 🙀👍👍
This is genious! Your channel Rocks man!
Thank you so much!
Thanks for sharing this!
Thanks for watching!
What a perfect tutorial!
Tks a lot for sharing your knowledge, Incredible works ! greetings from Ecuador
Thanks for sharing. Great job bro! I will implemented in my designs.
There's a product called Glue Looper, that is a precision CA glue applicator that fits into an X-Acto handle. There are a few different versions, depending on the particular use.
What a fabulous tip!!!!!! No pun intended... but really, this solves a BIG problem, and it does so elegantly. THANKS!!!
Love this I will definitely try it
Genius as I figured from your previous videos that you may of stretched out some plastic tubes and fitted em to glue bottles 👍
You are a Genius!
I was wondering what brand you used and I realized that it's not the brand, it's your applicator that's the import bit. So cool
Thanks! Excellent tutorial.
Thank you!
Brilliant!
wonderful tip, thanks a lot
Thanks for watching buddy!
amazing! Thanks for sharing! :)
No problem, I hope this is useful to you in your creations :)
❤you to share that trick! Realy usefull!Thanks a lot !
Wow this is awsome thank you for the tips
Thank you for watching!
Works great, amazing!
Awesome, happy to hear it helped you!
Amigo. Tienes una increíble creatividad, te felicito. Tus trabajos son excelentes. Sigue adelante. Saludos desde Costa Rica
Bro - what a great video. Damn, making some in a few minutes
Analyzing the situation. The air that will always enter the tube when you use the glue and what causes that annoying clogging and increase in the glue's viscosity is now trapped in parts inside the tubes, just cut the 'clogged' part or put new tubes in!
Awesome tutorial!
Thank you!
Great and very useful tip. Bravo !
Thanks for sharing, I m going to try it soon.
👍🏻🇨🇵
Glad it was helpful!
Amazing!
Thank you!
Rapaz. Muito obrigado! Já fiz o meu, e é maravilhoso!!!
Eu que agradeço!
Thanks. That's very helpful.
I'm glad it helped! Thanks
Genius... Thanks
Hey, how are you doing?! I hope you’re staying safe, what with this coronavirus thing going around. Unfortunately I had to stop my projects because of this epidemic, as a matter of fact, I’m not even at home, where my machine shop is. I’m in Rhode Island, my wife and I had to stay with my uncle, who’s in a wheel chair, his nurses aid quit because she didn’t get time off for quarantine.
Wow, this is exactly how we made glass pipettes for chemistry, specially out in the field. When we didn’t have access to electricity for our powered pipettes We’d take half inch glass tubes, heat it (the same way) over the Bunsen burners, and stretch until we got pipettes size we needed. Though the experience was horrible because sometimes we’d accidentally suck in our samples, though they were never dangerous, it was unsanitary. Now, I use those very same Q-tips to etch my name in metal.
This is an awesome idea for precision flow of glue. Very nice.
Hey Eddie!! I'm fine, how about you? Hope everything is okay with you and your family! The quarantine threw me off rails as well.. I've been locked out of my shop, so I'm only working on smaller projects.. That's cool, but glass working must be waaay harder to get right, isn't it? Well I hope you stay safe and we get well through all this pandemy, best wishes for you and your family!
@@CutTransformGlue Yes, you stay safe, too my friend.
Very clever 👍👍👍👍
Excelente dica, camarada. =) Valeuu
Ansiosaaa!
S2
Thanks you very much.
Que dica foda!!! Valeu, muito obrigado
Thanks for this, going to give it a go 👍
Thank you for watching!
Brilliant
whataa great trick beautiful nice
Ohhhh thankyou very much
This will help me a lot
Cool! Happy to help, thank you for watching!
mano que genial!!!!! mó macetezinho especifico que deve ajuda muito
Genial, eu estava a procura disso! Muito obrigado amigo!
Obrigado Lucas, fico feliz que tenha ajudado você!
@@CutTransformGlue boa sorte!
Thanks for this!!!!
Thank you for watching!
Nice thanks for the tips, actually before this i wanna asking but now u have make this video. Awesome 👍
Thank you for watching buddy!
wow!!! Thank You so much :)
You're welcome, buddy!
Thanks
very good tip , thx.
Thanks for watching!
what type or brand of glue will you recommend for this project, it's so cool and I want to built one now.
This type of doser I feel can only work with really thin, low viscosity glue. So, for CA glue, that's just perfect. Other kinds of glue.. not so sure! Thanks for watching!
Star Bond is a good brand
Nice. Ever try heat shrink tubing to seal it to the bottle?
Amazing idea!! I'll give it a try
Man just saved my L!FE
Obrigado CTG
GOD BLESS
I thought you just bought them or they came with the glue, I didn't realize you made them, pretty cool stuff.
Thanks a lot!
Smart!
Actually genius
Thanks buddy!
Thank you شكرا
Thank you for watching!
Oh thanks for the tip !
I think if you manage to get a metal tube this thin and if you manage to use it on the bottle, you'll just have to heat it up with a flame to burn the dry glue inside instead of cutting or replacing the tip.
Gotta try that, thanks buddy!
@@CutTransformGlue well try to see if the CA glue can burn once dry ahah, when it is liquid id is flammable but once dry I'm not 100% sure.. Oh and fumes are toxic so be carefull and outside :)
Might try syringes. You could draw the CA out of the glue bottle and use a bit of tape over the syringe cap to keep it stored in the syringe. Just need the right gauge needle that will work with the viscosity of the glue. :)
great idea as that thin ca glue goes everywhere, however here in Australia you simply cannot get plastic Q tips, they are all paper :( very annoying
Great tip! Get it? TIP
Q-tip tip tip!! :DDD
thanks my problem solution
Happy to hear that!
Friend, I did it here with my 20 gram jar (which always caused me a hassle when it was clogged). But using a lighter the result was better, with candles I lost several cotton swabs! My concern is that this tape on the pot's fitting will prevent air from entering and causing it to harden! I've seen videos of people in carpentry who use this glue inside enamel bottles, using the lid with the brush, will it last without hardening?
hahahah amazing Tip. Thanks
Thanks for watching buddy!
KUL BRO! ✌
Genius tip…… 😉😉😉😉😂
Thanks ;D
Finally:))
;))
🤯
Good❤sir
Eu uso agulhas de seringas.
Já fiz com haste de cotonetes .
Nunca usei agulha, dura bastante? Se entupir como você faz?
Uso agulhas de calibre mais grosso.
Na verdade é para cola S-320
Já ouvi falar dessa cola! É quase como um solvente para plásticos certo? Queria testar mas nunca encontrei vendendo em embalagem pequena
Já tentei usar agulha e nunca consegui pq a cola seca na parte plástica da agulha que "abraça" o bico da cola. Sei que a parte metálica vc desentope aquecendo com uma chama, mas nesse trecho de plástico não sei o que fazer...
Ok! Ohhh ok! Not for nothing… BUT I TOTALLY MANAGED THIS TODAY! Lolol dude, how did that give me more satisfaction than my f*\€ing law degree?!? Lololol
Yay, that's amazing... so happy to hear that! thanks buddy
Yeah this is a great idea but where on earth do you get plastic q tips
Which wood you are using please tell
MDF :)
I'll have to keep my eyes out for this thin plastic rod! Qtips are all paper now!
Often the cheap "house/store" brand ones are plastic. Also try "dollar" stores.
@@wingnutbert9685 I'm in the UK, which (alongside Europe) banned these kinds of single use plastics over a year ago (before I made the comment you're replying to!).
I just buy glue applicators now, think I spent £5 on a lifetimes supply haha
Can we even get plastic quetips anymore?
I’ve found these very easily were I buy them at malls , small shops, wholesales, and general shops so mostly anywhere you can even buy them in bulk online for very cheap for 35 South Africa rands where I live. Hope I help 🙂
was a good tip BUT q-tips are now card/paper!
Oh really? Never seen that.. that's better for the environment though
vc tem bons trabalhos. É brasileiro, certo?
Muito obrigado! Sou sim :)
@@CutTransformGlue tenho um canal com meu filho, Spider demente. Fazemos customizações em bonecos. Temos quase 40k de inscritos. Vc é muito talentoso! Muito habilidoso! Somos de Brasília.
Your a genuis
Thank you!
So you get a Q-tip and then you need to CUT and TRANSFORM It in order to GLUE things. Can't say the name of the channel doesn't match the contents.
heheh I loved it! Can I frame this? Thanks a lot for you comment buddy, stay safe!
@@CutTransformGlue Yes, you can, of course LOL
bom
Valeu!
Qtips stems are now paper
We can no longer buy q tips made of plastic
Yeah, this is not possible anymore. I think just about every EU country has outlawed plastic in those qtips.
Plastique?🤔
Jman
cant buy Q tips with plastic bodies anymore, they are all paper these days, much better to dispense a small blob, then use a small plastic sized match stick to paint it where you want it. when dispensing directly out the tube as shown in video there is the possiblity for it to flow everywhere and swamp the area, with the small blob you have more control over it, otherwise you get the crazy glue scenario !!
Some cheap, off-brand or store brand ones are still plastic. "Dollar" type stores as well. I have some I just bought not realizing they weren't paper stick ones. :) No tool is perfect for every job. This type of applicator does what it does well.
@@wingnutbert9685 where are you located ? I am in the UK, cannot buy plastic anymore, we trying to save the planet
@@pintail120 Good luck with that!
Man they changed all the q-tips plastic rods to rolled paper rods over here. Sad face.
Smart !