I titled this "American Klaxon CS8" as a joke because i don't have a stand for my 3t22 made yet. So i had to duct tape it to a drill bit box and have it horizontal for this test
@orlandoarguello9153 yess, it is a 3t22. I just named it "American Klaxon CS8" as a joke because i dont have a stand for it yet. So i had to runnit horizontally for this video
Speaking of port ratios. After i finish this, I'm gonna pull a funny and make a 9 port stator and 9 port 3 vane undertone rotor. My friend has a funny username that I'm gonna turn into a real siren. 9/12port3t21
horns are already modeled. i just need to print them all. Demetrius Padilla helped me a ton with modeling them in blender. All i have left to do is model the stand, and then print everything. Other than the stand, the entire siren is done being 3D modeled
Looks like you beat me to it with this design because the concept design I have in mind is similar to yours But it's supposed to be a hybrid of both of them
not a 125, rotator would be death to try and figure out. and theres very little reference images of the inside. and with me, if a siren has a coded variant, i am required by law to make my mini coded. I would need to do 1/3 scale and i gotta experiment with a motor first to see if its even strong enough for two 6 inchers. My next siren is a 1/3 scale of the B&N Omni Directo (that one in maiden rock wisconsin)
not rn. haven't setup a controller with manual solenoid control. Monday my Time O Matic Model 3 form 61K1RS should come in the mail and i will use that for flashing normally. for broadmoor flash, i will use another blinking module i have. I will mainly do broadmoor timing on my grinder siren.@@thedancingpickle6362
@Creeperboy099 i have a couple friends who own real XT22s and they gave me measurements off their siren. And then that combined with using reference images and paint. net with a ruler calibrated to known dimensions to find the unknown dimensions
The 3T22 and the CS8 were both first made in 1952. I wonder they are copying, if they were, id imagine Klaxon copying because the 3T22 is better in every which way
I titled this "American Klaxon CS8" as a joke because i don't have a stand for my 3t22 made yet. So i had to duct tape it to a drill bit box and have it horizontal for this test
Wait you drilled into Your 3T22? Now it has a Hole.
put it on a pole and keep it like this
That is awesome! I've never heard a mini siren hi-lo so well.
Agreed
𝓘 𝓱𝓪𝓿𝓮 𝓲𝓽'𝓼 𝓽𝓱𝓮 𝓽𝓫𝓸𝓵𝓽 1003
This is really cool! Impressive how well it imitates an actual 3T22!
Damn!! Best mini siren hi-lo i've heard. Your stuff really is amazing, compared to lots of other mini sirens i've seen on the internet
Thank u soooo much!!!!!
@orlandoarguello9153 yess, it is a 3t22. I just named it "American Klaxon CS8" as a joke because i dont have a stand for it yet. So i had to runnit horizontally for this video
Can't stop repeating this vid, nice work 💯
That’s actually quite nice!
Thank you!!
@@nascarsimracing1make a real cs8 plssss
This is pretty cool! nice job!
Sick mini 22
I hope this can be downloaded when its is finished
Yes it will be! It will be free on printables!
Nice Job!
I do want to see someone make a siren with an odd (but scary) port ratio with b&m like choppers.
Speaking of port ratios. After i finish this, I'm gonna pull a funny and make a 9 port stator and 9 port 3 vane undertone rotor. My friend has a funny username that I'm gonna turn into a real siren.
9/12port3t21
@@nascarsimracing1 cool, what if it's a 9 port stator and a 3 port chopper
That''s too much of a port reduction, would be wayyy less efficient than half port.@@grovecitysirens_GCS
why dat rotor white
Temporary print, used up the rest of my starter filament that came with the printer when i bought it
That sick man! Will you be making the horns next?
horns are already modeled. i just need to print them all. Demetrius Padilla helped me a ton with modeling them in blender. All i have left to do is model the stand, and then print everything. Other than the stand, the entire siren is done being 3D modeled
@@nascarsimracing1 ohhhhh ok, cooool!
Looks like you beat me to it with this design because the concept design I have in mind is similar to yours But it's supposed to be a hybrid of both of them
A next siren after the 3T22 and the hurricane can you make a sound master 125 just asking
not a 125, rotator would be death to try and figure out. and theres very little reference images of the inside. and with me, if a siren has a coded variant, i am required by law to make my mini coded. I would need to do 1/3 scale and i gotta experiment with a motor first to see if its even strong enough for two 6 inchers. My next siren is a 1/3 scale of the B&N Omni Directo (that one in maiden rock wisconsin)
I think a SoundMaster 125 is basically just an enclosed-horned Soundmaster 115
Its there a way to use it manually?
To do the broadmore escape sound?
not rn. haven't setup a controller with manual solenoid control. Monday my Time O Matic Model 3 form 61K1RS should come in the mail and i will use that for flashing normally. for broadmoor flash, i will use another blinking module i have. I will mainly do broadmoor timing on my grinder siren.@@thedancingpickle6362
Is that 3d printed?
@@jayisbeautyhub1732 yes it is!
𝓢𝓸𝓾𝓷𝓭𝓼 𝓵𝓲𝓴𝓮 𝓪 𝓽𝓫𝓸𝓵𝓽 1003 👍
Are you going to sell it
need to put the flasher timing slower for it to be klaxon styled.
I know. I titled it "American Klaxon CS8" as a joke bc its my 3t22 core but horizontal for this test. I don't have a stand made for it yet
@@nascarsimracing1 oh I was just assuming you named it that cause it’s running on 60hz electricity
Lets GO
Where did you get the specs again?
The dimensions?
@@nascarsimracing1 yeah, were there blueprints or something?
@Creeperboy099 i have a couple friends who own real XT22s and they gave me measurements off their siren. And then that combined with using reference images and paint. net with a ruler calibrated to known dimensions to find the unknown dimensions
The 3T22.
Nice
Can you do pulse next
maybe later.
3T22
3t22...
The 3T22 and the CS8 were both first made in 1952. I wonder they are copying, if they were, id imagine Klaxon copying because the 3T22 is better in every which way
Thats 3t22
Now make an actual CS8.