Showing the installation of the pillar moldings was very useful. It helped me a great deal when replacing mine. Thank you very much for making this video.
Mahalo bro. You are a true professional. I only have to replace the molding and your video was on point. We can tell you have a lot of experience. Thank you very much.
Hola, te agradesco mucho por tu video. Estuvo excelente. Si no es mucha molestia me podrias decir donde conseguiste las molduras. Necesito remplazar las de mi 2015 Explorer que se me volaron. Y cualquier otro consejo que me puedas dar para hacer el trabajo yo mismo. Gracias.
Nice video. You make it look very easy and the way your doing it and explaining it is very clear to me. I would be confident if you'll work on my car. You must have been doing this for a long time now. After mine was changed, it's dripping on the right corner when it rains. Do you think it's covered by the warranty who did the job? Keep up the good work.
great quality & safe install is that the P2Gplus you are using I use that on all my dealers insurance work I prefer to use the Mach60 ...great decking keep up the awesome work
I bought a driver's side window trim molding that needed replacement. The rubber seal deteriorated and is gone too. With the trim molding, they sent a bottle of urethane adhesive. Some of the comments suggested that the urethane replaces the rubber molding. So, do I just run a line of this the length of the trim piece where it adheres to the window directly?
here the thing ..in this video i just replaced the top but the true is you must replace both molding bottom and top. but some times does not make sens replace the bottom molding if is in good conditions ,,just the top the problem you will found that after remove the top..some times the bottom is crack but still you can used if those cracks are not let the coming coming off.. any way..the top molding is handle for after market not the bottom molding that s only oem. if you have the top from after market they suggest put some spots of urethane under the top molding but that can be a problem for the next install..you will have to got new one if you don t have the right technique to remove t. but if you don do that the double face tape is under the molding some times does not hold good but the trick is clean the old or new molding to warranty the attach. but if is oem that one comes with the original butty tape real thin and hold nice.. but what i said before costumer its who said whats he wants just give the right info to make m understand that. thanks for your comment
VIDRIOKAR thank you for taking the time to write back! Yea, I’m just replacing the top, but the rubber part of the bottom is gone. It’s my own explorer, so if the urethane doesn’t hold it good enough...it’s just me complaining to myself. ;) Thanks again and good video!
Eres muy profesional excelente trabajo soy de México DF megustaria conseguir algunas de tus herramientas me dedico lo mismo desde ase 20 años gracias y saludos...
VIDRIOKAR nosé como se llaman es como que cortas el pegamento en el vídeo se ven de color rojo o amarillo con las navajas y las ventosas con chicote con el que desmontarse el parabrisas de un camaro
Es increíble ver trabajar sin problema alguna yo me dedico a lo mismo y trato de cuidar la calidad de mi trabajo y es increíble tus herramientas soy de Colima y me interesaría saber si se consigue por ejemplo la cortabutilo para sacar el cristal zano manejo herramientas equalizer pero esas no las hay aquí porfa espero pronta respuesta saludos
Showing the installation of the pillar moldings was very useful. It helped me a great deal when replacing mine. Thank you very much for making this video.
Mahalo bro. You are a true professional. I only have to replace the molding and your video was on point. We can tell you have a lot of experience. Thank you very much.
Hola, te agradesco mucho por tu video. Estuvo excelente. Si no es mucha molestia me podrias decir donde conseguiste las molduras. Necesito remplazar las de mi 2015 Explorer que se me volaron. Y cualquier otro consejo que me puedas dar para hacer el trabajo yo mismo. Gracias.
Nice video. You make it look very easy and the way your doing it and explaining it is very clear to me. I would be confident if you'll work on my car. You must have been doing this for a long time now. After mine was changed, it's dripping on the right corner when it rains. Do you think it's covered by the warranty who did the job? Keep up the good work.
I love the glass stand, how did you do that? Also what do you use the solar panel for. Thanks
Thanks OG! We have this exact SUV this morning
great quality & safe install
is that the P2Gplus you are using
I use that on all my dealers
insurance work I prefer to use the Mach60 ...great decking
keep up the awesome work
thanks j yes its p2g..
i will doing good jobs thanks ...for watching..
Great video! Thank you. I’m on my 3rd set of trim. Cracked the first replacement while installing.
What epoxy are you using near the top clip?
I bought a driver's side window trim molding that needed replacement. The rubber seal deteriorated and is gone too. With the trim molding, they sent a bottle of urethane adhesive. Some of the comments suggested that the urethane replaces the rubber molding. So, do I just run a line of this the length of the trim piece where it adheres to the window directly?
here the thing ..in this video i just replaced the top but the true is you must replace both molding bottom and top.
but some times does not make sens replace the bottom molding if is in good conditions ,,just the top the problem you will found that after remove the top..some times the bottom is crack but still you can used if those cracks are not let the coming coming off..
any way..the top molding is handle for after market not the bottom molding that s only oem.
if you have the top from after market they suggest put some spots of urethane under the top molding but that can be a problem for the next install..you will have to got new one if you don t have the right technique to remove t.
but if you don do that the double face tape is under the molding some times does not hold good but the trick is clean the old or new molding to warranty the attach.
but if is oem that one comes with the original butty tape real thin and hold nice..
but what i said before costumer its who said whats he wants just give the right info to make m understand that.
thanks for your comment
VIDRIOKAR thank you for taking the time to write back! Yea, I’m just replacing the top, but the rubber part of the bottom is gone. It’s my own explorer, so if the urethane doesn’t hold it good enough...it’s just me complaining to myself. ;)
Thanks again and good video!
Where can I get the tool to take the view mirror off?
Tienes algún video o has hecho 2016 Ford Explorer !!!
Jose Mireles todavia no dices el nuevo diseno verdar
Eres muy profesional excelente trabajo soy de México DF megustaria conseguir algunas de tus herramientas me dedico lo mismo desde ase 20 años gracias y saludos...
Julio Cesar Urbina Nateras claro solo dime cuales necesitas y te las conseguimos
VIDRIOKAR nosé como se llaman es como que cortas el pegamento en el vídeo se ven de color rojo o amarillo con las navajas y las ventosas con chicote con el que desmontarse el parabrisas de un camaro
VIDRIOKAR y el precio porfa gracias..
Julio Cesar Urbina Nateras ok mira mi correo es vidriokarautoglass@gmail.com. mandame tu correo ahi y me explicas mas enconcreto q necesitas va
VIDRIOKAR si deja llegar a casa no tienes WhatsApp
Where do u get those cold knife handles ?
Great job!!!Thank you for sharing
Great vedio, and thanks for sharing.
Unfortunately I need 2 new pillars also for ford explorer 2013 any one can help with any website.
Gracias amigo.....muy bueno.
no te preocupes alcontarrio gracias por tu comentario
hi tonik38 solar panel for all my charges drlls etc. i will post video how to make one its just busy im full of jobs know sorry but i will..
Hi, how can we contact you to get repairs?
well im subcontractor so my contractors are who call me ...
Vdkar Auto Glass Replacement who are your contractors so that we can contact them inorder for them to contact you. Urgent please
I remember I would save them just in case but now instead of butyl tape they use the heat gun and put glue ☹️
You are the vestido my friend , i love thia work it's my life bro please i need this tols lol
Es increíble ver trabajar sin problema alguna yo me dedico a lo mismo y trato de cuidar la calidad de mi trabajo y es increíble tus herramientas soy de Colima y me interesaría saber si se consigue por ejemplo la cortabutilo para sacar el cristal zano manejo herramientas equalizer pero esas no las hay aquí porfa espero pronta respuesta saludos
Si así tengo bastante trabajo ahora con esas herramientas huuu ya me vi jejejejejeje el mejor de Manzanillo colima
Es el DW2383