Custom Cable Management PC Build | Tech Skit | My New PC | Hyte Y70
ฝัง
- เผยแพร่เมื่อ 4 มิ.ย. 2024
- Hey guys! Thank you so much for stopping by and watching the video! Give it a like rating if you enjoyed and drop me a comment. I absolutely love how this build came out, especially with all of the custom wrapped cables inside the PC! @hytebrand was nice enough to send me out their new Y70 (Non-touch) PC case and @superflower sent out their Leadex VII XG 1000W White for the build.
---------------------------------------------------------
Everything included in the build is listed below, including what I used for the cable wraps:
PC:
Case: amzn.to/3JodHVt
CPU: amzn.to/3J5ig7f
GPU: amzn.to/3PS9Aoh
Motherboard: amzn.to/49rUj4z
PSU: www.newegg.com/super-flower-l...
CPU Cooler: amzn.to/3U6UJZE
Storage: amzn.to/3TNg3Cc
RAM: amzn.to/3UbmsZy
Fans (Side and bottom): amzn.to/3W7rPdF (x6)
Fans (Top): amzn.to/3U6TDx3
Fan (Rear): amzn.to/4aC0nJm
Cable Wrap (Outer): amzn.to/4ao188t
- 1 pack should be enough for all cables but I would probably do 2.
Cable Wrap (Inner): amzn.to/3VVWXfI
- Get 1/4", 1/2", and 3/4" for different size cables.
- 1/4" was used for smaller cables like front panel connectors, fan, and AIO cables. 10ft is probably OK but I did 25ft, and had some extra.
- 1/2" was used for all PSU cables and AIO tubes. I also did 25ft of this but had extra.
-3/4" was only used for the SATA PSU cable. I didn't use very much of this and 10ft was fine.
You will also need a pair of scissors to cut wrap to length, and a lighter for the inner wrap, to prevent fraying on the inner cable once it is cut. I also used some white electrical tape.
---------------------------------------------------------
The rest of my Setup:
Wall Setup:
IKEA Pegboards (x4) and accessories: www.ikea.com/us/en/p/skadis-p...
Fake Vines: amzn.to/3mmXest
Pixel Art Frame: amzn.to/3D5l7Kj
Keyboard: amzn.to/3xkD0VK
Desk Setup:
Bookcase: IKEA KALLAX - www.ikea.com/us/en/p/kallax-s...
Desk top: IKEA KARLBY 98": www.ikea.com/us/en/p/karlby-c...
Drawers: IKEA Alex Drawers: www.ikea.com/us/en/p/alex-dra...
Alex Drawer Organizers: amzn.to/3XJVqIF
Desk Spacers: amzn.to/3xnQZdv
Light: www.ikea.com/us/en/p/markfros...
Metronome: amzn.to/3TN93VZ
Computer Bluetooth Speaker: amzn.to/3TRmSCZ
Main Monitor: amzn.to/3TRIoXU
Top Monitor: amzn.to/43OY5DU
Monitor Stand: amzn.to/4avUVru
Key Light: amzn.to/3vLLeG7
Webcam: amzn.to/3PRwz2W
Keyboard: amzn.to/3VOtbJN
Mouse: amzn.to/3JeR3zR
Wrist Pad: amzn.to/3W7r8B5
Mouse Pad: amzn.to/3J9zwIk
Microphone: amzn.to/43Mka6f
Boom Arm: amzn.to/3PTBtMG
Headphones: amzn.to/3VbabBJ
Audio Interface: amzn.to/3fyhaBu
Speakers: amzn.to/3t2Pc7p
Speaker Stands: amzn.to/3XJQWSq
Foot Rest: amzn.to/3f467QH
Chair: amzn.to/41P9br0
Main wall setup:
Floating Shelf: www.ikea.com/us/en/p/lack-wal...
Plants: All from Target
Lego Bonsai: amzn.to/44uKi4s
License plate Sign: "license_plate_signs" on Instagram
Acoustic Wall Panels: amzn.to/4cQJ6h5
---------------------------------------------------------
Socials:
My Discord ~ / discord
TikTok ~ www.tiktok.com/@dankamyouknow...
Twitch ~ / dankamyouknow
Instagram ~ / dan_kam_you_know
---------------------------------------------------------
Business Inquiries:
Dankamcontact@gmail.com - วิทยาศาสตร์และเทคโนโลยี
Hey guys! Thank you so much for stopping by and watching the video! Give it a like rating if you enjoyed and drop me a comment. I absolutely love how this build came out, especially with all of the custom wrapped cables inside the PC! @hytebrand was nice enough to send me out their new Y70 (Non-touch) PC case and @superflower sent out their Leadex Vii 1000w PSU in white for the build.
Everything included in the build is listed below, including what I used for the cable wraps:
PC:
Case: amzn.to/3JodHVt
CPU: amzn.to/3J5ig7f
GPU: amzn.to/3PS9Aoh
Motherboard: amzn.to/49rUj4z
PSU: www.newegg.com/super-flower-l...
CPU Cooler: amzn.to/3U6UJZE
Storage: amzn.to/3TNg3Cc
RAM: amzn.to/3UbmsZy
Fans (Side and bottom): amzn.to/3W7rPdF (x6)
Fans (Top): amzn.to/3U6TDx3
Fan (Rear): amzn.to/4aC0nJm
Cable Wrap (Outer): amzn.to/4ao188t
- 1 pack should be enough for all cables but I would probably do 2.
Cable Wrap (Inner): amzn.to/3VVWXfI
- Get 1/4", 1/2", and 3/4" for different size cables.
- 1/4" was used for smaller cables like front panel connectors, fan, and AIO cables. 10ft is probably OK but I did 25ft, and had some extra.
- 1/2" was used for all PSU cables and AIO tubes. I also did 25ft of this but had extra.
-3/4" was only used for the SATA PSU cable. I didn't use very much of this and 10ft was fine.
You will also need a pair of scissors to cut wrap to length, and a lighter for the inner wrap, to prevent fraying on the inner cable once it is cut. I also used some white electrical tape.
Thanks for your support,
Danny
Pc build looks great can you get Hyte y70 non touch in black because my setup is black and i already have the black y60 and the y70 non touch is so much nicer
@@AussieVR27 Yes, the Y70 non touch is also available in black as well: amzn.to/3QaI3yO
@@DanKamYouKnow oh thank you so much
The build is amazing
My next build will be white. With hard tubes, 'cause I sway that way. Look forward to more vids.
Can we just appreciate the facr that he the extra effort to have his own custom figurine make with his face on it and made it look even better?
😎😎😎😎😎😎😎😎
I wanna edit and fix the grammatical mistakes I looked over so badly that I don't get the "AcShAuLLy 🤓". But don't wanna lose the heart at the same time
@@Gamcoasterbro I read this comment, finished the video, saw Kratos, giggled and came back to like this comment, re-read it again while doing so, and all these times I never noticed the mistake until I read THIS comment of yours. No need to change the errors friend, our human monkey brains fill in the gaps for us :)
This man has the best relaxing voice lol. He gives the "everything will be alright" vibe
I appreciate that!
I love the ingenuity, especially behind the fan controller placement, absolute genius!
Thank you! The fan controller placement was totally last minute too, I had planned for another location but it didn't work out.
Man is literally the Bob Ross of PC builds
Thank you for sharing your cable management. It gave me some new ideas for running my cables.
Yoooo that cable management is almost as clean as that beard bro 😎 👊
Thank you! 😎🤝😎
Loving your PC build shorts. Posting here to say TY for the lols and the excellent builds. :)
Best PC master race channel on YT , love it ! I just built basically the same white rig with a 4090 and 7800x3d but went with the icue h150 link system. Loving it. I wasn’t going to build but I’ve been watching all your videos lately after finding you on YT and you inspired me lol. I upgraded from my aging 2019 build with a 9700k/2080. I need those cable wraps now darnit !!
I have to admit that this build looks smooth and it has a space station vibe I would love to see the build perform with high gaming and fresh rate gameplay? I love your calming PC videos. Thanks Dan
Dude...absolutely loving the dad energy!
I'm following you since a month and I recently took a new pc case to change my old pc case. I tried to do two days, and it took all day, but I couldn't. Then I gave up, and I bring my computer to the mechanic. Now it is all good.
Now I watched your video, and I'm laughing my luck because the video released after I finished my pc case
Looking amazing man! Enjoy it
Dan over here living my dream with the all white build. Looks fantastic my guy!!
came from tiktok! absolutely beautiful build man. i bet you're super proud.
Yes I am! Thank you so much!!!!
That's really a clean build, I love the idea floating storage sleds that can easily to remove. Very convenient to change driver
Cable management to perfection 😮👍🏽
Hello! Sorry for the complete noob question, but what hold the motherboard in place before you put on the screws? I've seen you do this multiple times, but I awains install the motherboard with the case lying down...
I wanna do a pc building now because of you!! Ty for your videos and that unforgettable chill vibe
Looks amazing. Great job with the build
This appeased every ounce of my OCD for wires. Cables, spreading thermal paste...and the black fan controller on H for contrast, matching low tone LED! 💯 on everything! If cables allowed, I'd have that on a constantly rotating platter 😍 but then I would get nothing else done because I'd stare at it all day 😅
Appreciate it! It was a really fun build to do!
thats amazing clean and the mummy description was a perfect way to describe it!
W thanks I was looking for my first PC this is the one I’m going to build now
ur room is SOOO cool i love the aestetic and i love the build ur living the dream man! congrats♥
Thank you! Really appreciate you saying that.
when the back looked that good you know you have perfect cable management and take you time to make sure it ends up like that
Extremely clean build ! Nice job
good build, its great to see hardware enjoyers becoming "famous" you deserve it its the best thing when you are send and can buy a bunch of hardware, i love hardware but i dont have a lot of money so i'm happy when i see a guy that really likes it and have the chance to test out a lot of things
How did you wire the fans? Is the 1 in the rear chained with 3 on top and 3 on bottom
Cable wrapping is smooth as his Head and Voice✨Good Job, Keep it up...
That is CLEAN! And maybe it's just me,but it also looked like putting in that little bit of extra effort with the cables in the beginning made other tasks during the build easier to do when the time came. Very nicely done!
Mate , this cable management idea is great, this is the next step for my computer after I purchase these cable accessories, thanks .
No problem 👍 Thought it would be cool to experiment!!
The ISS pc build.
love it
I want to wrap my cables like that now, great video!
Go for it!
I really love your videos and the way your talk, its soo chill.♥
Thank you so much!!
Amazing! I just made my first computer build (white) this week and was watching your videos and saw how good the custom cable management was but didn't know how you did it!!
Thank you!!
that i have to go to the bathroom ad cut was so smooth. Instant sub.
❤️❤️❤️
Your cable management is super duper good!
Cable wrapping as smooth as the head 😎
Brruuuhhhhh
Can you benchmark God Of War?
😂😂
Absolutely beautiful creation!
I WAS planning on upgrading to a 3090 and doing a case swap to a black h9 flow but this build inspired me so much i think im gonna go with a y70 and try your cool cable wraps!
Anyways love the build 🔥🔥
Thanks! Can’t go wrong with the H9 or the Y70! My last build was the H9 Flow and I loved it. Although similar, both cases are so different. Good luck with yours!
That case looks mint 👌
Build came out great! Love the space station vibe and the green light really pops.
Thank you!! 😊
Mark!!!! Suuuuuuuuuuuuuuuuuu!!!
@@DanKamYouKnow what up homie?! Oh, you know!!!
love it.... very clean setup indeed.. ❤❤❤
What is that "lazy susan" style turntable the Y70 was sitting on in the beginning on the video?
God of PC build.
That’s a really unique way to cable manage, incredible build I must say!
Appreciate it!!!
I love ur content this is just amazing ❤
Thank you so much for this tips ❤❤❤❤
No problem 😊
was waiting for another video like this forever....love it ❤
Thanks! My full time job makes it difficult to do as much content creation as I would like!
@@DanKamYouKnow whatever it is man , we are always with you !
showing techtubers how it should be done, good job :) love the non biased theme, never go full biased and you will grow to millions soon
now here's a unique and cool way to do some cable management without spending a fortune on custom cables :D (even though the build itself costs about a fortune and a half) great job and awesome build!
Wow, that feels clean, whatever i buy a pc case and the components, i would love to manage the cables more in the back of the pc case so it won't become a pile of something that gets the component in it's way.
Love your vids bro keep it up!!
planning on doing a build with this exact case, never built before. are reverse better to get than regular fans or does it matter? also for the bottom, should i add bottom fans?
For this case, you’ll only need reverse blade fans for the side! And yes, I would highly recommend putting fans on the bottom, fitting 3 can be difficult but it is possible. Bottom fans will ensure the GPU gets a lot of fresh air from the bottom
Had to come and watch! Thanks for all the great content Dan!
Thanks for watching!
@@DanKamYouKnow of course!
@DanKamYouKnow, which rotary table are you using for your pc build? i'm searching for many month but can find what i need. can you give me a link?
clean man, so clean
I try, thank you!
Which one should I get if im looking for a tank of a gaming pc a rtx 4080 normal one or rtx 4090 (i dont have a budget)
clean af
Chillest Man on TH-cam. Great videos btw
Appreciate it!
I did wonder about how you did the cabling, helpful video
Hi man, looking pristine. I have the Y60 and I just bought the 4090 24G OC (same colour) but mine doesn't have space and the glass is barely touching the graphics card, and temperature increased, I'm thinking to change the case for the one you have (Y70) as I can see there is more room for the graphic card, I just want to know if you have temp problems? please let me know I want to sort this issue asap as i need to remove the glass to cool it down. Thanking you in advance
Great vídeo! Congrats. Keep it up 🤘
What a video! Just fabulous!!!
Thanks so much!
Hey man, Hopefully you see this, but what is the swivel that you use to spin the PC while it's on the desk?
It’s unfortunately not available on Amazon anymore, but it’s a “TV Swivel Stand” or commonly referred to as a “Lazy Susan”. I did some digging on couldn’t find anything else super similar.
Seeing this made me question, what do you do with the “older” builds? Do you store them? Sell them? I’m curious.
Ur the best man ❤️
Holy! An 11 minute skit! I'm down😊
😎😎😎😎
I wonder how do I install my soundcard, as my riser card is blocking its way? cable lengh is not adjustable I guess
I love your videos and different personalities 😂😂😂
This legend really wrapped the jfp1 cables 😭
what rgb software do you use for your main pc?
Love ur videos ❤
Looks sick!!
Thanks!!!
Does the GPU has to be vertical showing the fans like that or can it also be installed horizontally? Thank you.
Vertical only
Bathroom breaks are important!
Mega 🤩 Looks really great
Thank you 😋
Fantastic
A lot of products don't ship to Korea, That's a shame.
Thanks for the great video
hey i have the same case mine is the hyte y60 how did u get all three fans to fit though isnt the screw holes offset
Only the Y70 offers support for 3 fans on the bottom and 3 fans on the side.
@@DanKamYouKnow i see ty ty cuz i saw a mod for y60 but i cant find the right scews and the link the person sent isnt working so i was just curious
I love your channel, you speak so clearly that I can understand easily, I'm Brazilian btw...
🤝🤝🤝🤝
Okay so im having an issue with the fans specifically. only the 3 pack came with a pin connector but i cannot connect any of the fans to the rgb controller, as they all only have plugins that go into the motherboard and the motherboard i have doesnt have enough for all of my fans. im completely stuck and no guide online has the issue i have, i think im missing parts
Hey dan, i need help with my pc, i need to know how much my pc in cad, its specs are 128 gigs of ram EVGA founders edition 1080ti, Intel xeon E5 2699 v4 cpu and 9 tb storage
Looks amazingly clean in the back. Can't say I like the front though. Its certainly neat and tidy, just doesn't look very good though, in my opinion. But great tip for managing the rear.
There’s just something about all white 👌
My first ever all white build and I love it!!
I'm sure it's gonna be a great video!
Thanks!!!
Hey man, just wanted to say I love the videos! Quick question, Y70 or the Neso P1? I currently have the Neso P1 and really enjoyed building in that case, soooo much room for activities. Anyways keep up the great work!
is it noticeable if i put rgb fans on the bottom?
Return of the 70
Looks awesome! Very clean and organized. I'm lazy, I'd just throw in some $20 cable extensions and call it a day, lol
Thank you!!!
Nice one looks awesome funny I just comment on another video about how annoying cable management is and then I found this video great idea 😁
😎😎😎😎
Sweet im building my new pc tomorrow
Do you have a video on your channel for first time users making their computer ready for gaming? Like all the stuff you gotta do such as turn off mouse accel and disable background apps and other stuff I keep forgetting?🥺
What keyboard do you use wen you are making that video when you was typing
It’s linked in my bio, if you go to my channel page.
Yo, would be great if you review/show the newest motherboards that almost all the input ports are behind. It's so cool and clean.
thats lv 99999 Cable managment i ve seen so far !
In my case, I do not recommend using electrical tape because over time it becomes sticky. It might be better to use some thermal insulation for cables and with a heat gun or even a lighter, make it shrink to fit the size of the cables. Btw. Nice video I love your shorts 😎
Yo man,love your work
Wanted to ask if it's possible to be done in black?
YES! They make the same sleeves but in black as well. I want to do another video one one soon
I miss when all PC channels were like this. Now it's just a bunch of millionaires pushing sponsors. This channel makes me super happy.
That looks nice 😁
Thank you!!!!
can you help me? I have a Ryzen 3800x and Radeon rx 6600xt but just bought a Ryzen 5800x because it was only $170. But now i need to know what PSU and GPU to get. Also I don't know if i should get a new CPU cooler as well.
what should i do?